milwaukee M18 AL Cordless Site Lights User Manual
- June 5, 2024
- Milwaukee
Table of Contents
milwaukee M18 AL Cordless Site Lights
OVERVIEW
BATTERY INSTALLATION
LIGHT LEVEL
HANGING
LIGHT DIRECTION
TECHNICAL DATA
| Output Watts | 20 W |
|---|---|
| Lighting time with one fully charged battery (3.0 Ah) | |
| 3 h | |
| 6 h | |
| Battery voltage | 18 V |
| Weight according to EPTA-Procedure 01/2003 | 2.1 kg |
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
For battery pack storage longer than 30 days:
- Store the battery pack where the temperature is below 27°C and away from moisture
- Store the battery packs in a 30% – 50% charged condition
- Every six months of storage, charge the battery pack as normal.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the product.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk). Use only compatible Milwaukee chargers from the same battery platform
for charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately
with soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don‘t use the product in wet areas.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuits.
- Ensure that the battery pack is secured against movement within the packaging.
- Do not transport batteries that are cracked or leak.
Check with the forwarding company for further advice
SPECIFIED CONDITIONS OF USE
The area light is intended to be used as a light source away from the main supply. Do not use the product in any way other than stated for normal use.
MAINTENANCE
Do not disassemble the work light. The LED light cannot be replaced. Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents. If needed, an exploded view of the tool can be ordered. Please state the article no. as well as the machine type printed on the label, and order the drawing at your local service agents.
BATTERIES
Battery packs that have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum lifetime, the battery packs have to be fully charged, after use. To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.
SYMBOLS
- CAUTION! WARNING! DANGER!
- Please read the instructions carefully before starting the machine.
- Do not stare into the beam.
- Safety class III
- This tool is only suitable for indoor use. Never expose the tool to rain.
- Do not dispose of electric tools together with household waste material! In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>