pro ENGINEERS Rotating Dual-Camera Endoscope User Manual
- June 10, 2024
- pro ENGINEERS
Table of Contents
Rotating Dual-Camera Endoscope
User Manual
360°rotating dual-camera endoscope
Please read the manual carefully before operating the system.
Please charge the battery before using.
Safety and Notice
Warning To avoid electrical shock put the item indoor when charging
Warning Use only input AC 110~240V output DC 12.6V charger. This machine
can only use the original charger and lithium battery, reminding the charging
time is 5 hours. Please charge the battery before use!
- Please check the appearance and functionality of the goods upon receipt. In the event of dama ged or missing goods, please forward images to us within 3 working days, Otherwise, we will not be able to provide after-sales service
- Working environment of camera system -10ºC~50ºC(14ºF~122ºF)95% RH; Storage environment: -20~70(-4~158) 95% RH.
- The warranty becomes void if any physical damage is present by user or force majeure factors or if the system is disassembled or connect non-factory parts by the user
- Use only the original accessories to avoid possible risks to health and property, and thus meet all related legal regulations.
- Keep controller dry.
- Do not drop, knock, or shake the inspection system. Inappropriate behavior when using the camera system may damage the internal electronic circuit board or deform the lens shape.
- Make sure all accessories are connected before starting up.
- Do not remove or install camera when the machine is turned on. If replacement is required, please replace it in the power off state.
Parts list
1.1 Accessories
| Item | Image | Description | Optional |
|---|---|---|---|
| Camera Head | Camera Head size:Ø22*77mm |
Dual cameras
Pan 360°| Standard
Controller| | 7-inch color display screen
Battery:12V 2800mAh 31Wh| Standard
Sun visor.| | Size:198.59468mm
Material: engineering plastics| Standard
Hose line| | Size:Ø6mm5000mm
Material: plastic coated steel wire| Standard
Charger| | Input:AC 100-240V〜50/60Hz
Output:DC 12.6V / 1A| Standard
Waterproof Ring| | Material: silicone
Size: Ø201.5mm| Standard
Manual| | Manual| Standard
Suitcase| | Size:410330130mm
Material: engineering plastics| Standard
1.2 Controller
| 1 | 7-inch display |
|---|---|
| 2 | Pan-left |
| 3 | Pan-right |
| 4 | On/Off |
| 5 | Power-on indicator |
| 6 | Dual camera switching |
| 7 | Down |
| 8 | Menu |
| 9 | Image flip |
| 10 | Light brightness up |
| 11 | Light brightness down |
| 12 | UP |
| 13 | DC JACK |
Quick Start Guide
2.1 Battery charging
- Remove the accessories from the box;
- Charge the controller battery;
- Connect the adapter to the 100-220V power supply.
- Connect the plug to the jack of the controller.
- When charging is completed, the charging indicator will change from red to green.
2.2 Connection
-
The hose line aviation connector is connected to the controller socket;
-
Install the camera to the connector;
-
Install the sunshade.
Be careful:
- Check the waterproof ring of the camera.
- Do not hold the rotatable part when installing the camera.
2.3 Starting up
Menu
3.1 Brightness
Adjust the display brightness.
3.2 Contrast
Adjust the display contrast.
3.3 Chromaticity
Adjust the display chroma.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>