MONSTER Pusat Ergo Wireless Mouse User Manual
- June 5, 2024
- Monster
Table of Contents
MONSTER Pusat Ergo Wireless Mouse User Manual
Introduction
This document contains a functional and performance specification of the Pu sat Ergo Wireless.
Physical Specification
MOUSE Dimension
Height: 69.07±0.5mm
Length : 113.85±0.5 mm
Width : 83.’l0±0.5mm
RECEIVER Dimension
Height: 5.9±0.50mm
Length: 18.’l±0.50mm
Width: l’l.6±0.5mm
Buttons: Left, Right, Middle, DPI Button. Side Button. Mode Key. Light control
key.
Mechanical Characteristics
Operating force of switches : 50 60 gf. [ Switch Only] Mouse switches
operating force : 70 ± 20gf
Scroll rotate force : 50 ± 30 gf-cm
Electrical Characteristics
Receiver
USB port available for PC
Power supply voltage: 3.0 – 4.2V
Power consumption: 60mA
MOUSE
2.4G mode
Working current <10mA (1.5V white paper, no RGB lights);
Standby current <1mA (stop working for 5 seconds)
Sleep current <200uA (stop working for 30 minutes);
Bluetooth mode
Working current <10mA (1.5V white paper, no RGB lights);
Standby current <1mA (stop working for 5 seconds) Sleep current <200uA (stop
working for 30 minutes);
DPI
1000/1600(system default )/2400DPI
Instructions For Use
– The mouse mode indicator flashes for three times at 0.5Hz/second. Insert the
receiver. and the LED will be ON for 2 seconds before it goes out.
– Press the “Mode'” button to switch to Bluetooth mode. Long press the “‘Mode”
button (more than three seconds). The indicator light corresponding to
Bluetooth flashes at 1Hz/second. voltage~3.3V, low voltage alarm light
flashing.
2.4G Description Of Forced Pairing
Switch to VIG mode
At the same time, long press the left/middle/right button (3 seconds] to enter
2.qG pairing, the LED flashes at 1HZ/second [pairing time is 20 seconds within
20 seconds, plug in the receiver, the LED is always on for 2 seconds, 2.qG The
pairing is successful.
Bluetooth pairing instructions
First switch to Bluetooth mode, and then press the mode button [more than 3
seconds] to enter the pairing state, and the LED flashes at 1Hz/second
[matching time is 2 minutes].
Computer System Settings — Bluetooth — ON [Bluetooth 4.0 ADAPTS to Windows 8 and above], which can be found BTq,0 +2,qG Mouse, click to enter the pairing, the pairing is successful LED is always on for 2 seconds and then out, showing the connection has been successful.
Light control button: Long press 3S to turn off the light, long press 3S to turn on the light, with memory, short press to switch the effect of colourful lights. There is synchronous sleep.
Move Spec
Resolution: l 000/1600(Default]/2400DPI [ X and Y] Tracking Speed : 3Dips
Acceleration : l0G
Report Rate 2.4G : 250Hz/BT:125Hz
Use Distance 2.4G mode: l0 M(no shielding, open]; Bluetooth mode: BM (Have no
cover]
Environment
Temperature
Operating Temperature : O’C to q □ ‘C
Operating Humidity: ≤ 85%
Transportation Temperature : -15’C- 60’C
Transportation Humidity: ≤ 85%
Environmental Test
High Temperature Test
Temperature : 60±2°C
Time : 96 hours
Humidity: 50±5% R.H
Low Temperature Test
Temperature : -15±2°C
Time : 96 hours
Moisture Test
Temperature : qQ±2’C
Humidity: 90-95% R.H.
Time : 96 hours
High-Low Temperature Test
Temperature : -15±2’C for 1 hour and then 60±2’C for 1 hour
Cycles : 5 cycles;
The test mouse sample was left to sit at room temperature for an hour after
passing the test.
Reliability Specifications
Mouse Life Test
Load : l00gf Vertical force
Speed : 200 ±40 mm/sec
Travel: Minimum 300 km Any direction
Scroll Wheel Life Test
Operating Speed : 1 cycle/sec
Operating Force : 50 ±30 gf-cm
Operating Cycles: 200,000 cycles
Drop Test
Number: 6 times
Height: 76 cm
Direction : 6surface each one times
Floor surface: Plastic floor tile
Determination of reliability test: since each test is destructive, each test must be independently sampled. The sample after each test can work normally namely judge to pass this test.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>