KLARUS GL5 Foregrip Light User Manual

October 30, 2023
KLARUS

GL5 Foregrip Light
User Manual GL5
Foregrip Light User Manual

Thank you for choosing Klarus products! Please read the user manual fully before use.

Specifications

  • Model: GL5
  • Main LED: CREE XP-L2 HD V6
  • Dimensions: 140.2mm(5.52”) x 78.7mm(3.1”) x 34.4mm(1.35”)
  • Compatible Rails: standard 1913 rail
  • Compatible Batteries: 1 x 18650 or 2 x CR123A
  • Waterproof: IPX 8
  • Weight: 280g (9.88oz) (w/o battery)
  • Warranty: 5 years

Package

Name ForegripLight 1*18650 Battery Waterproof O Ring User Manual
Qty 1 1 1 1

ANSI

Specification Mode High Medium Low Strobe
**** ANSI lumens(LM)
2600mAh 18650 Li-ion Battery 1200 500 100 1200
**** Runtime(h)
2600mAh 18650 Li-ion Battery 1 2 13 2
Beam intensity(cd)
2600mAh 18650 Li-ion Battery 18320 9375 1849
**** Beam distance(m)
2600mAh 18650 Li-ion Battery 270 193 86
**** ANSI lumens(LM) 2 x CR123A Battery 1000 500 100 1000
**** Runtime(h)
2 x CR123A Battery 40min 1. 8 1.3
Beam intensity(cd)

x CR123A Ba
2 Battery| 14900| 9375| 1849|
| Beam distance(m) 2 x CR123A Ba ftery| 255| 193| 86|
| Impact resistance(m)| 1
****| Waterproof| I PX8

※ Data are based on Klarus lab tests. Actual results may differ based on usage and conditions.

Operations

ON/OFF
Main Switch: Click to turn ON, click again to turn OFF.
MODE Switch: Depress to enter Strobe, click and hold for 2 seconds to lock in Strobe.
Change Brightness Level
MODE Switch: Click to cycle through High → Medium → Low →Cycle;click and hold for 2 seconds to enter Strobe
Intelligent Thermal Protection System (ITS)
When the flashlight is in max output mode, brightness will be automatically adjusted according to the temperature of the flashlight body to protect the LED and internal components and ensure safety and stability.
Rail Installation
Standard 1913 Picatinny Rail installation with manual adjusted screws.

KLARUS GL5 Foregrip Light - Rail installation

Unscrew the snap nut| The gun lamp is connected to the guide rail and fixed| Tighten the snap nut

Battery Installation

When using for the first time, take out the gun light, unscrew the back cover, remove the insulating sheet, put the negative electrode of the battery into the barrel, and screw the back cover to use

KLARUS GL5 Foregrip Light - Battery Installation

Twist off the snap nut| Insert battery with negative terminal towards lamp| screw the tailcap tightly

Usage and Maintenance

  • During use, product’s surface temperature will increase, especially when higher lumen output. The maximum safe operating surface temperature of the flashlight is 60℃ /140 ℉.
  • The included battery is charged to approximately 50% by default and will not support maximum output and maximum runtime. Please charge the battery fully before first use.
  • To maintain waterproof rating, please lubricate the O-ring with silicone safe lubricant and replace worn O-rings as needed.
  • Do not make the eye contact directly with light to avoid injury.
  • Do not disassemble or modify this product which can cause damage and will void the warranty.

Warranty

  • KLARUS guarantees the flashlight against defects in material and workmanship. Flashlight products that are found to be defective under normal use within 5 years of the purchase date will be repaired or replaced without charge.
  • Klarus offers 1 year warranty for all rechargeable batteries.

Limited Lifetime Warranty

  • If problems develop after 5 years from the date of purchase, KLARUS will charge for parts and repairs. The total repair fee will be assessed according to the cost of the replacement materials. If damage to the light is substantial, KLARUS will contact the customer via the dealer with a quote.

Warranty Procedure

  • If this flashlight does not perform as specified, the product will be repaired or replaced as described above.
  • Please contact your original KLARUS dealer for replacement and repairs.
  • If the warranty issue cannot be resolved by the dealer, please contact KLARUS at service@klaruslight.com for assistance. Please provide the following information to expedite the process:
  1. List the serial number on the light.
  2. Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
  3. Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.

Note

  • Product specifications of this printing is accurate, any updates will be reflected in the physical product. There may be slight difference between photographic and actual product.
  • KLARUS reserve the right to make the final determination of terms and conditions in this manual.
  • Scan the QR code and receive the latest update from KLARUS media account or KLARUS official website.

|
---|---
http://www.klaruslight.com/|

<https://m.facebook.com/klaruslight>  

KLARUS LIGHTING TECHNOLOGY CO., LIMITED
Address: 8/F, E Building, Longjing Industrial Park, Bantian
Subdistrict, Longgang District, Shenzhen City, 518000, China.
Phone: +86-755-27700110 Email: info@klaruslight.com
Customer Service: service@klaruslight.com
Website: www.klaruslight.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals