KLARUS HM2 Compact Dual LED Motion Controlled Headlamp User Manual

June 4, 2024
KLARUS

KLARUS HM2 Compact Dual LED Motion Controlled Headlamp

KLARUS-HM2-Compact-Dual-LED-Motion-Controlled-Headlamp-
PRODUCT

Operation

  • Left button:

  • Click once to enter

  • spotlight mode

  • 1x High

  • 2x Medium

  • 3x Flash

  • Click again to exit spotlight mode

  • Right button:

  • 1x High

  • 2x Medium

  • 3x Red constant-on

  • 4x SOS

  • Click again to exit area light mode

Press any button to flash to enter sensing mode

Components

Battery Replacement

  • Release the rear compartment latch in the direction of the arrow.
  • Open the rear compartment, remove the used batteries and insert the new batteries in the correct polarities orientation. Close the rear compartment

Hanging Hook

  • Remove the headband and turn the hook 90 degrees
  • upward. The hook is ready to be used as a hanging aid.

Headband Installation

  • Please adjust the headband according to individual preferences until it is snugly mounted when the headlamp is worn on the forehead.
  • The headband should be loosened after long usage to avoid discomfort.

Usage and Maintenance

  • During use, surface temperature will Increase, especially when higher lumen output. The maximum safe operating surface temperature the is60°C/140°F.
  • To maintain a waterproof rating, please lubricate the O-ring with silicone safe lubricant and replace worn 0-rings as needed.
  • Do not make eye contact directly with light.
  • Do not disassemble or modify this which can cause damage and will void the warranty.

Warranty

  • KLARUS guarantees the headlamp against defects in material and workmanship. headl amp products that are found to be defective under normal use within 1 year of the purchase date will be repaired or replaced without charge.

Limited Lifetime Warranty

If problems develop after a year from the date of purchase, KLARUS will charge for parts and repairs. The total repair fee will be assessed according to the cost of the replacement materials. If damage to the light is substantial, KLARUS will contact the customer via the dealer with a quote.
Warranty Procedure

  • If this headlamp does not perform as specified the product will be repaired or replaced as described above.
  • Please contact your original KLARUS dealer for a replacement and repairs.
  • If the warranty issue cannot be resolved by the dealer, please contact KLARUS at service@klaruslight.com for assistance. Please provide the following information to expedite the process:
  1. List the serial number on the light.
  2. Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
  3. Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase

Note:
Product specifications of this printing are accurate, any updates will be reflected in the physical product. There may be a slight difference between photographic and actual products. KLARUS reserve the right to make the final determination of terms and conditions in this manual. Scan the QR code and receive the latest update from the KLARUS media account or KLARUS official website.

Specifications

  • Model: HM2
  • Dimensions: 66.5mm x 45mm x 37mm
  • LED: CREE XPG-3
  • Output: 270LM
  • Working Voltage: 2.5V4.5V
  • Battery Capacity: 3AAA
  • Waterproof: IPX 4
  • Weight: 41.5g
  • Warranty: 1 year

Package

Product Headlamp Headband User Manual
QTY 1 1 1

ANSI standard data

KLARUS LIGHTING TECHNOLOGY CO., LIMITED

  • Address: 8/F, E Building, Longjing Industrial Science Park,
  • 335 Bulong Rd, Bantian St. Longgang District, Shenzhen,
  • China. 518000.
  • Phone: +86-755-27700110
  • Email:service@klaruslight.com
  • Website:www.klaruslight.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

KLARUS User Manuals

Related Manuals