nedis WIFIP121EWT Wi-Fi Smart Plug User Guide

: June 5, 2024
: nedis

Table of Contents

Intended use
Specifications
Main parts
Safety instructions
Installing the Nedis SmartLife app
Connecting the app
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis WIFIP121EWT Wi-Fi Smart Plug User Guide

Intended use

This product is a smart plug that can be controlled remotely. The WIFIP121EWT / WIFIP121FWT have a power monitor to measure electric power values.

The product is intended for indoor use only. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	SmartLife Plug (with power monitor)
Dimensions (l x w x h)	56 x 55 x 79.5 mm
Output power	240 VAC; 16 A, 3680 W
Input AC frequency	50 / 60 Hz
Operating temperature	-10 °C -45 °C
Wireless technology	Wi-Fi
Wi-Fi frequency	2.4 GHz
Frequency range	2400 – 2483.5 MHz
Max. radio transmit power	16 dBm

Main parts

(image A)

On/off button
Indicator LED

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power source and other equipment if problems occur.
Do not expose the product to water or moisture.
Only handle the product with dry hands. Handling with wet hands might cause an electric shock

Installing the Nedis SmartLife app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your e-mail address and tap Continue. You will receive a verification code on your e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Connecting the app

(image B)

Control tile
Common functions
Add product
On / off button
Make sure WiFi is enabled on your smart phone.
Open the Nedis Smartlife app on your phone.
Register or login to your account.
Connect the product to a power outlet.
Tap + in the top right corner.
Select the product type you want to add from the list.
Confirm the blue LED is blinking quickly. If it does not blink, hold the on/off button AO for 5 seconds and check again.
Enter the password of the 2,4 GHz Wi-Fi network to which your phone is connected and tap Confirm. The Nedis SmartLife app will now search for the lamp.
Rename the product after it has been found and added. If the regular connection method fails, the lamp can be connected using AP mode:
Tap + BO3
Select the product type you want to add from the list.
Select AP Mode in the top right corner.
Hold the on/off button 5 seconds to reset it again and confirm the blue LED is blinking slowly.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFIP121EWT /WIFIP121FWT / WIFIP131FWT / WIFIP131FWT3 from our brand Nedis°, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/wifip121ewt#support
nedis.com/wifip121fwt#support
nedis.com/wifip131fwt#support
nedis.com/wifip131fwt3#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28 5215 MC ‘s-Hertogenbosch, the Netherlands