Mizco TT-WCMAG Wireless Charging Holder Instruction Manual

Mizco TT-WCMAG Wireless Charging Holder

Introduction

1. As a wireless charging phone holder in the car, combine with windshield/dashboard suction mount.
2. Attach windshield/dashboard suction mount on the windshield and dashboard
3. Snap the T-slot of the product into the T-buckle of the above
4. accessories, snap into place, This secures the product
5. Place the smartphone on the center of the product, The smartphone is automatically and firmly adsorbed by the product
6. Plug the car charger into the car cigarette lighter or the travel charger, Insert the TYPE-C plug of the car charger cable into the TYPE-C female charging input socket on the product
7. When the power is turned on, the smartphone starts to charge, to achieve a wireless charging function, No need to plug the charging plug into the smartphone
8. When the phone is fully charged and you want to remove the phone, hold the phone and take it out directly,
9. No need to unplug the charging plug
10. The interference potential of the device or system.
11. Maintenance of the

• The interference potential of the device or system.
• Maintenance of the system
  RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>