SENCI 1200 Pro Portable Power Station User Manual

SENCI 1200 Pro Portable Power Station

PORTABLE POWER STATION

Improper use of the product may result in objects or personal injury.  & Be sure to read this manual carefully and fully understand this :product before use.

This newly designed solar generator SIGMA PRO 1200W uses highquality lithium- ion batteries as the main body for energy storage. Compact size, light weight, large capacity, easy to carry, with built-in USB ports, DC and AC outputs, this unit can provide power solutions to you quickly and
easily wherever you are in outages or outdoors.
Please read this user manual carefully before using this unit. If you have any questions, please feel free to contact us.

• Use the charger provided to charge the unit and keep it works properly.
• Please read this manual before using this unit, check whether the product is in good condition and whether the accessories are complete.
• Product upgrades, appearance and screen printing will be adjusted locally without notice, please refer to the actual product.

WHAT YOU GET

Catalog

• Safety Information ——————————————o 4
• Product Specifications ———————————–o s
• Product Function ——————————————–o 6
• Smart LCD Display Screen ————————— o 7
• Recharging Ways ——————————————o a
• How to Use —————————————————-o 9
• Tips for Use —————————————————-1 o
• Recycling——————————————————–1 o
• Battery Information —————————————-4 o
• Statement ——————————————————4 o
• Potential Failure Analysis ——————————-11

Safety Information

• Do not disassemble or modify this unit privately.
• Do not use or store this unit in a high temperature environment and avoid direct sunlight.
• Do not use or store this unit in a dusty or humid environment.
• Do not heat this unit or place it in fire, water or other liquid.
• Do not place the unit sideways or upside down while using or storing.
• Do not charge with a non-standard charger.
• Do not charge for a long time, and disconnect the charger as soon as it is fully charged. \
• Do not touch the input and output ports of this unit.
• Only use the output outlets to power external devices.
• Check the unit before each use. Do not use it if it is damaged or broken. Keep this unit away from children and do not allow children to use this unit alone. If the unit is accidentally dropped or hit, turn it off immediately.
• Carefully read the instructions for the appliances you intend to connect with this unit.
• Please use this unit with caution to avoid the risk of electric shock.
• If rust, odor, overheating or other abnormalities are observed, discontinue use of this unit immediately and contact us.
• This unit meets the relevant requirements for the transport of dangerous goods.
• Please dispose of the scrap according to the regulations and classify them in time to avoid explosions and pollution.

Product Specifications

Basic Specifications

• Net weight: 12kg{26.5Ibs)—————————————————————————-
• Dimension: _ 340 x 236 x 215mm(13.4 x 9.3 x 8.5inches) ___ _
• Battery Capacity: 288000mAh,921.6Wh. ____ _
• Battery cycle life;2000 times,remaining capacity>80% (LiFePO4) ____

Output

• Wireless Charging: 15W ____
• DC 5521 Output x2 : 13.6V-5A, Total 8A. _____
• Car Outlet Output: 13.6V-8A _____
• (DC 552 1 Output {2)+ Car Outlet Output: Total 8A max.) ___ _
• Fast Charm3 OutJ}ut x 4: 5V-2.5A, 9V-2A, 12V-2A(24W max.) ___
• USB-C_100W Output_x2 :5V/ 9V/12V/15V/20V-5A{100W max.)Total 200W. ____
• AC Output_x3:_120V- 60Hz, Total 1200W. ————————————
• Discharging Temperature :_14 to 104°F(-1 Oto 40° q ____
• Charning Temprature: 32 to 104° F {0 to40° CL ____ ♦_

Input

• PV Input: 18V-25V-20A max.
• AC Input_: 100V-120Vac 50-60HzL 600W max. ___
• Car Charger Input:_1 2V,100W max. ____

Product Function

Smart LCD Display Screen

1. nput current
   Display the current input power of the unit in watts in real time.

2. Battery indicator
   fi:bRE ECO
   Display the remaining battery, and the icon rotates when charging and discharging.

3. Battery charge percentage
   Display the percentage of remaining battery, and when the remaining battery is less than5%, charge it.

4. Output Current
   Display the current output power of the unit in watts in real-time.

5. Remaining charge/discharge time
   The remaining charging/discharging time is based on the current power consumption of the unit.

6. Solar panel charging
   When the product recognizes the charging input of the solar panel, this icon will light up.

7. Bluetooth
   When the mobile app controls the product, the Bluetooth icon will light up.
   a.AC Recharging Input
   When the product is connected to mains charging, this icon will light up.

8. Pure sine wave
   When the AC output is used, pure sine wave AC output icon appears on the screen.

9. TEMPSHORTOVERLOAD
   When the product triggers the protection mechanism, the corresponding icon will light up.

10. AC output
    When AC output occurs, the AC icon will light up; When bypassing in put and output, the UPS icon will light up;
    When the product is output in parallel, the parallel icon will light up.

11. USB output icon
    When the USB output port is in use, the USB output icon appears on the screen.

12. DC output
    After double-clicking the power button to enter energy-saving mode, the ECO icon will light up.

13. ECO mode
    After double-clicking the power button to enter energy-saving mode, the ECO icon will light up.

Recharging Ways

How to Use

Tips for Use

• This unit has built-in high-quality LiFePO4 batteries, large capacity, long-lasting and durable. We recommend that you use it in the range of 5 to 35°C environment.
  If you do not use this unit for a long time, check that all switches are off.

• In order to extend the life span of this unit (LiFePO4 battery), it is recommended to charge once in every 3 months, at least once in every 6 months, to prevent the battery from losing power.

• During the use of this unit, do not block the fan exhaust. This unit integrates overload, overheating, short circuit, over voltage, under voltage and other safety protection technologies, after troubleshooting, tum off the power switch and reopen it to reset the power supply to work again, if the reopening switch is invalid, you need to connect to the charger to charge 5s to wake up the battery, the unit can work normally.

• The LED illumination can be adjusted to five modes 25%,50%, 100% brightness, SOS mode, and flashing mode. Every time it can be adjusted by clicking the light button repeatedly with 1 S interval.

Recycling
Please send the used electronics, batteries and packaging materials to the recycle bin especially for LiFeP04 batteries. This can help with waste disposal and promote material recycling, to protect environment!

Battery Information
This unit has built in high quality LiFePO4 batteries. Do not disassemble the unit and remove the battery privately in case of destroying the unit. Batteries can be charged and discharged hundreds of times or more.

Statement
Please be aware that this manual is only for this unit SIGMA PRO 1200W and does not represent the manual for others. In addition, this manual is provided as a guide only, the pictures in this manual are for reference only, and all statements, information and suggestions in this manual do not constitute any express or implied warranty. We are always dedicate to the improvement of product itself, therefore, the appearance and performance of units may be slightly different from this manual, please understand.

Potential Failure Analysis

1. Why is the LCD screen not lit up during charging operation?
   Analysis: Once no operation for a long time, the LCD display will enter the energy-saving mode: tum off the display back light board, adjust the display brightness. It may cause the illusion that the display is closed.
   Solution:Tap the power/AC/DC switch to wake up the display.

2. Why does the charger heat up while charging?
   Analysis: When the charger is in a room temperature environment, the surface temperature should be lower than 70°C , if the charger temperature is lower than 70°C , it is normal, if it is higher than 70°C , it may be a charger malfunction, except for extreme environments such as high temperature.
   Solution:Charge at 0-40°C or replace with a new charger with the same specification.

3. Why does the appliance not work when plug into AC port?
   Analysis: This unit can only support appliances within 1200W, to check if the loaded appliances exceed the rated output power, if so, it will trigger overload protection.
   Solution:Remove the load appliance, turn on the switch again, and the unit can be used normally.

4. Why is the output suddenly stopped during the use of this unit in high temperature?
   Analysis: In extreme environment with high temperatures, overheating protection may occur in use.
   Solution:Turn off the unit, after its automatic cooling, turn on the switch, it can be used normally. It is recommended to work below 40° C.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions.may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. if this equipmemt does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radionv technician for help.

The device has been evaluated to meet general RF exposure requirement,This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>