ZEBRONICS ZEB BR8590RUCF 5.1 Speaker User Manual

ZEB BR8590RUCF 5.1 Speaker
User Manual

ZEB BR8590RUCF 5.1 Speaker

Thank you for purchasing the ZEB-BT8590RUCF 5.1 Speaker. Please read this user manual carefully and keep it for future reference.
Warning

| CAUTION!
THE RISK OF ELECTRIC SHOCK DOES NOT OPEN|
---|---|---

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE THE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

• To prevent fire or electric shock do not expose the unit to rain or moisture.
  Note: This product is for indoor use only.

• Refer servicing to qualified personnel only.
  The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
  The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions before using the product.
2. Read all the warnings carefully.
3. Follow all instructions carefully.
4. Do not use this unit near water.
5. Clean onlywith dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install the speaker system near any heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.
8. Protect the power cord from being waled on or pinched particularly at plug points and the point where they exit from the unit.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the unit. When a cart is used, be cautious while moving the cart/unit combination to avoid injury from tip-over.
11. Unplug this unit during lightning storms or when unused for a long period of time. Refer all servicing to qualified service personnel.
    Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.

Package Contents:
Subwoofer :1 U
Satellite:5 U
Remote :1 U
QR code guide :1 U
Input cable (RCA- RCA) :1 U
Antenna cable :1 U
Wall mount with fasteners :1 U
Stereo to RCA adapter :1 U

How to use the BT:

1. Select the audio input to BT mode
2. Search BT device with the name “ZEB-BT8590RUCF”
3. Connect the BT
4. If your BT device is below the 5.0 version, input the password “0000” when connecting.

Product Representation

Front Panel

STANDBY: Stand by function
INPUT: Input mode button, switch among BT/AUX/USB/FM/5.1 Ch modes.
5.1/2.1: To switch between 5.1/2.1 modes.
**/AUTO: Play/Pause in USB/BT mode; Automatic FM radio search by pressing 3 secs.
VOL
**CH-/ : Previous track in USB/BT mode; Previously saved channel in FM mode. Turn down the volume.
VOL CH /: Next track in USB/BT mode; Next saved channel in FM mode. Turn up the volume.
MIC 1: MIC 1 Port.
MIC 2: MIC 2 Port.
U DISK: USB Port.

Important Notes

• Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging from a plug-point.
• Ensure that the main power switch is in the “OFF” position before connecting the AC power cord to the power supply to avoid damage to the unit.
• A damaged power cord can easily cause an electric shock or fire; Never use a power cord after it has been damaged.

Battery Installation

Remote Control

: Power switch button (Standby) switch On or off
MUTE: Mute
FM: FM Radio
AUX: AUX Input
DVD: AC-3 input for 5.1 mode audio source.
BT: 13T Input
SAVE:   Save FM Channel
5.1/2.1:   5.1/2.1 Mode
TUNER-/+: Previous/Next Channel Keep Pressing to search the channel
** : Play & pause
AUTO: Press and Hold for 2-3 sec to begin FM auto scan
** : Previous track when USB/BT Input
CH-: Previous Channel When FM Input
** : Next track when USB/BT Input
CH+: Next Channel When FM Input
VOL -/+: To increase/decrease master volume
SW-/+: To calibrate the woofer sound level
FL-/+: To calibrate the front left speaker level
FR-/+: To calibrate the front right speaker level
CEN-/+: To calibrate the center level
SL-1+: To calibrate the surrounding left level
SR-/+: To calibrate the surrounding right level
SLEEP-/+: Time choice 0/10/20/30/45/60/90/120
REPEAT: Repeat Mode
RESET: When the Volume is at The Maximum, Press the “RESET” Button at The Status While powering On
MIC-/+: To increase/decrease MIC Volume
ECHO: To increase/decrease MIC ECHO
Note:** Insert the plugs fully into the jocks. Loose connections may produce noise interference.

Input Connectivity

Output connectivity

SPEAKER TERMINALS
Connect front speakers, center speakers, and surround speakers to 5.1 speaker output terminals.

• The front speaker’s cords to the FRONT SPEAKERS terminals
• The center speaker’s cords to the CENTER SPEAKERS terminals
• The surround speaker’s cords to the SURROUND SPEAKER terminals

Note: Do not leave objects generating magnetism near the speakers.

Unit Operation

• The First plugs the cable of all the satellites into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, and the other end into the output jack of the computer or any external audio source, the power cord into the power plug socket. Then switch on the unit, and the LED will be in the blinking state in the front panel, when the standby button is pressed the unit lights up.
• Pressing the VOL + and VOL – buttons will enable the volume levels to be increased & decreased.
• When the 5.1/2.1 button is pressed, it plays back the track from stereo to 5.1 channel in all modes which is indicated through the blue lead for the selected mode.
• When in FM mode, press and hold the PLAY/PAUSE button in the front panel of the woofer or the AUTO button on the remote for 2-3 seconds the automatic scanning will proceed, and once after scanning it will playback the first channel of the full scan done.
• When inserted a USB, it will play from the device last inserted, the input mode will be changed to USB on the display and starts playing from the beginning or auto resumed from the track of the last time playback.
• When the USB is working, press the PLAY/PAUSE button to pause the music, and press the PLAY/PAUSE button again to resume music.
• When a USB drive is playing, press the MODE button to cycle through the LINE IN, USB, FM, and BT modes.
• When a USB drive is working, press the PREVIOUS and NEXT buttons to choose the previous or the next audio track.
• After stopping using the speaker, Use the standby button to turn off the unit, switch off the power switch, and unplug the power cord.

Features

5.1 Channel Speaker
BTv5.0/USB/FM/AUX/AC-3
LED display 16.51cm subwoofer
Remote control
Wall Mountable
Dual Microphone Input Jack

Specification:

Output Power (RMS)
Subwoofer: 50 watts
Satellite: 15 watts x 5
Total: 125 watts
Driver Size
Subwoofer: 16.51 cm x 1
Satellite: 7.62 cm x 5
Impedance
Subwoofer: 4Ω
Satellite: 4Ω
Frequency response: 40Hz-20kHz
S/N Ratio: 75dB
Separation: .50dB
File format support (USB): MP3, WMA, WAV, FLAC, APE
Line input: 2ch RCA, AC-3
Max supported USB memory size: 128GB
FM frequency scan range: 87.5MHz – 108MHz
BT name: ZEB-BT8590RUCF
BT version: 5.0+ EDR
Product dimension
Subwoofer: 198 x 318 x 330 mm
Satellite: 104 x 102 x 180 mm
Net.Weight
Subwoofer: 5.3kg
Satellite: 0.56Kg x 5
Total: 8.1 kg

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>