MONSTER Oron Gaming Chair Instructions
- June 5, 2024
- Monster
Table of Contents
Oron Gaming Chair
Instructions Manual
STEP 1
Turn the base plate of your gaming seat upside down.
STEP 2
Remove 4 screws which is located underneath the base plate. Line up the screw
holes of the base plate with the holes in the height adjustment mechanism.
Finally, screw the mechanism into the base plate using the 4 screws.
STEP 3
Screw the plate, which is connected to the bottom of the backrest, into the
base plate.
Attention: You must mount the plate into the base plate with 4 screws.
STEP 4
Base and backplate installation is complete.
STEP 5
Place the shock absorber into the middle of the reinforced metal foot, then
attach the 5 wheels to the metal foot as shown in the picture.
STEP 6
Place the shock absorber into the middle of the mechanism that is installed on
your gaming seat and the setup is complete.
- Please proceed with the assembly steps according to the instructions.
- The armrests on the seat may differ depending on the models.
- In the diagram, the mechanism, screw hole locations, etc. parts may differ by models.
- Depending on the model, the arm connection holes of your seat can be 2-3-4 holes.
- The shock absorber is delivered wrapped together with the metal legs.
- The Allen keys come in a pack, wrapped in the armrest.
- Screws are already attached to the seat. To install the parts, start by removing the screws from the screw holes.
- In order to solve problems regarding the gaming seats covered by warranty, please provide your name surname, a short video describing the problem, the invoice image or the e-commerce site order, and telephone and address information to info@monsternotebook.com.tr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>