SUPERATV IN-FWS-P-RAN-001 Polaris Ranger 1000 Scratch Resistant Flip Windshield Instructions

SUPER ATV IN-FWS-P-RAN-001 Polaris Ranger 1000 Scratch Resistant Flip

Windshield

INSTALLATION INSTRUCTIONS

• SuperATV does not recommend keeping a Windshield installed while transporting on an open-air trailer. Remove or secure with straps.
• This item is not returnable if the protective film has been removed.
• Test fit to the cage to confirm fitment before removing the film.

kit contents

Item Description: A Windshield

Item  Description                      Qty|  | Item  Description Qty
---|---|---
B| Top Frame| 1| G| Left Male Hinge| 1
C| Gas Strut| 2|  | H| Right Male Hinge| 1
D| Lower Frame| 2|  | J| Left Female Hinge| 1
E| Clamp| 4|  | K| Right Bracket| 1
F| Right Female Hinge| 1|  | L| Left Bracket| 1

TOOLS

Installation

Reference only; do not assemble completely at this time.

Install Seal to Windshield (A) as shown

• To ease installation, soak the Seal in hot water before cutting or installing to increase flexibility.
• Install Gasket across the front of the Frame in the location shown.
• Install Lower Frame (D) to Windshield (A). Use the hardware shown.
• Install the Top Frame (B), along with the Right and Left Female Hinges (F-J), to Windshield (A). Use the hardware shown.
• Place assembly on a machine.
• Insert Right Male Hinge (H) into Right Female Hinge (F).
• Secure Right Male Hinge (H) to holes located in the Frame with the hardware shown.
• Repeat for the Left side.
• Align the Windshield to the machine and tighten the Hinge hardware completely.
• The windshield should open and close smoothly. See “Hinge Alignment” if binding occurs.

Hinge Alignment

Hinges to be in-line with each other. Loosen hardware and adjust as necessary .

Gas Strut (C) Installation

• Install Clamps (E) to Gas Struts (C).
• Leave the Windshield open.
• Install Clamp (E) to Frame as shown.
• Install the Right Bracket (K) to Clamp (E) with the hardware shown.
• Secure the Right Bracket (K) to Frame with the hardware shown.
• Repeat the steps for the opposite side.
• Close the Windshield until Strikers, on Lower Frame, engage with the Right (K) and Left (L) Brackets.
• Tighten the Bracket hardware completely.
• If Strikers fail to engage, add a Washer between the Clamp and Bracket.

Windshield Cleaning

• Do not use Rain-X®, Plexus®, or any other protector, wax, or polish.
• Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
• Never use abrasive cleaners, abrasive pads, or gritty cloths.
• Do not use a windshield wiper blade or install a motorized windshield wiper
• Never use razor blades, scrapers, squeegees, brushes, etc.

1. Thoroughly rinse the Windshield to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean the Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand-washing soap can also be used.
3. To prevent water spots, use a chamois to blot the Windshield dry.

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on a machine, contact SuperATV® to verify that they will work together. Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified. Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

References

• SuperATV.com
• superatv.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>