MEARI Speed 17S Surveillance Camera User Guide
- June 5, 2024
- MEARI
Table of Contents
Speed 17S Surveillance Camera
User Guide
What’s in the box
Please consult this checklist for all parts.
Description
| Power | DC 5V/1A |
|---|---|
| Status light |
- Blinking red light: wait for network connection (slow) connecting the network (fast)
- The solid blue light on the camera is working correctly
- The solid red light on the camera is malfunctional
Microphone| Captures sound for your video
TF card slot| Supports local TF Card storage (Max.128G)
Reset| Press and hold for 5 seconds with a pin to reset the camera (if you
have modified settings, they will return to factory defaults)
Installation
- Put the camera on a flat surface.
- Use the included mounting bracket to fix the camera to a clean surface.
Connection
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the
App.
Add device
Log in to the CloudEdge, select “Add Device”, and add the smart camera to the
App according to the screen tips(Make the smart camera close to the router
when configuring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the TF card?
A: It is recommended to plug in the TF card after the power cut. Confirm
whether the TF card is normally available and the format is FAT32. And the TF
card can’t be identified when the Internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with almost
360 degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Support smart motion detection. The camera will detect movements, and then
send you to push notifications and app alerts.
Record
Support 24H continuous recording with high capacity TF card storage or Cloud
storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>