rizoma PE858 APRILIA Tuono User Manual
- June 3, 2024
- rizoma
Table of Contents
PE858 APRILIA Tuono
User Manual
PE858 APRILIA Tuono
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair, or maintenance, can cause accidents. Keep this user
guide as a reference for the future.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly
suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are
leaking, bent, deformed, cracked, chipped, or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case, never
try to repair or modify the Rizoma products or their components, always
replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your, safety Rizoma suggests
always contact
your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Consult the websitewww.rizoma.com, in the peg section click “MEDIA” to download the PDF document approval TUV.
**** Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Verify the operation of the foot brake, the brake light, and the shift
lever before riding. Improper installation could lead to loss of function and
loss of motorcycle control, resulting in an accident, personal injury, or
death.
Jumping, stunt riding, and excessive standing will lead to breakage of
the rear set controls, resulting in loss of motorcycle control, an accident,
personal injury, or death.
MONTAGGIO SFERA E MOLLA INSTALL BALL AND SPRING
Step 1
Montaggio valido per entrambi i lati Mounting valid for both sides
ATTENTION: lubricate the spring and the ball with mineral or silicon
grease.
MONTAGGIO ADATTATORE INSTALL ADAPTER
Montaggio valido per entrambi i lati Mounting valid for both sides
Step 2
MONTAGGIO PEDIVELLA INSTALL PEG
Montaggio valido per entrambi i lati Mounting valid for both sides
Step 3
ATTENTION: turn the peg clockwise or anti-clockwise to find the correct position.
RIZOMA reserves the right, in its sole discretion, to make changes to
the product and this information at any time and without prior notice.
Although many catalogs and advertisements depict riders engaged in extreme or
stunt riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full-face helmet), that has been approved by ANSI, SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
styles, such as full-finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries
where homologation is required.
Thus RIZOMA® Srl declines any responsibility for different use of its
products.