Carrier 76-02105-00 Natt Snow Instruction Manual
- June 5, 2024
- Carrier
Table of Contents
\ Carrier 76-02105-00 Natt Snow
PART NO.
| MODEL DESCRIPTION| KIT NUMBER (REFERENCE)
---|---|---
98-03383-| NATT SNOW/RAIN COVER SUPRA S6, S7, S8, S9 & S10|
76-02105-00
GENERAL INFORMATION & GRILLE REMOVAL
WARNING
READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
SAFETY
-
TOOLS: MAKE CERTAIN ALL TOOLS AND EQUIPMENT ARE APPROPRIATE FOR THE JOB BEING COMPLETED, AND ARE IN PROPER WORKING CONDITION.
-
PERSONAL PROTECTIVE EQUIPMENT (PPE): ALWAYS UTILIZE APPROPRIATE PERSONAL PROTECTIVE EQUIPEMENT THAT IS IN PROPER WORKING CONDITION. PERSONAL PROTECTIVE EQUIPMENT EXAMPLES INCLUDE, BUT IS NOT LIMITED TO THE ITEMS SHOWN BELOW.
-
RISKS: BE AWARE OF YOUR ENVIRONMENT AND SURROUNDINGS. FOLLOW ALL LOCK OUT / TAG OUT PROCEDURE ON ALL EQUIPMENT INVOLVED IN THIS PROCEDURE INCLUDING THE UNIT ITSELF AND ALL EXTERNAL POWER AND/OR FUEL SOURCES.
TOP PANEL SUPPORT ROD INSTALLATION
STEP 1
REMOVE THE GRILLE. FIND & REMOVE 3 QTY. OF STAUFF CLAMP, WASHER & SCREW AT THE
UPPER REAR SECTION OF THE UNIT. FIND & REMOVE 3 QTY. OF P-CLAMP & SCREW WITH
CAPTIVE WASHER AT THE UPPER FRONT SECTION OF THE UNIT.
STEP 2
REMOVE THE HINGE BRACKETS AND HARDWARE AT LOCATIONS SHOWN.
STEP 3
ASSEMBLE ITEM #10 (RETAINING CLIP), #20 (SUPPORT ROD) & #30 (CLIP) TO THE
CONDENSER SUPPORT BRACKET AS SHOWN.
TOP PANEL INSTALLATION
STEP 4
ASSEMBLE ITEM #40 (TOP PANEL ASSY) AS SHOWN USING THE HARDWARE SUPPLIED.
Carrier Transicold Divisi Carrier Corporation P.O. Box 4805 Syracuse, New York 13221
THIS DOCUMENT AND THE INFORMATION CO NTAINED THEREIN IS PROPRIETARY TO CARRIER CORPORATION A ND SHALL NOT BE USED OR DISCLOSED TO OTHERS, IN WHOLE OR IN PART, WITHOUT THE WRITTEN AUTHORIZATION OF CARRIER COR PORATION.
SUBMISSION OF THESE DRAWINGS OR DOCU MENT DOES NOT CONSTITUTE PART PERFORMANCE OR ACCEPTANCE OF CONTRACT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>