MONSTER Huma H4 V1.1 Gaming Laptop User Manual
- June 5, 2024
- Monster
Table of Contents
MONSTER Huma H4 V1.1 Gaming Laptop User Manual
NOTICE
The information in this user’s manual is protected by copyright laws, all parts of this manual, including the products and software described in it, can not be reproduced, transmitted, transcribed, stored in a retrieval system, nor translated into any language.
THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
The illustrations in this user’s manual are for reference only. Actual product specifications may vary with territories. The information in this user’s manual is subject to change without notice.
Preface
Regulations Information
-
CE compliance
This device is classed as a technical information equipment (ITE) in class Band is intended for use in living room and ofce. The CE-mark approves the conformity by the EU-guidelines:- EMC Directive 2014/30/EU,
- Low Voltage Directive 2014/35/EU(equals A2 : 2013),
- RF Directive 2014/53/ EU
SAR/DAS refers to the rate at which the body absorbs RF energy. The SAR limit set by the ICNIRP Guidelines is 2.0 W/kg(10g).
Testing for SAR is conducted using standard operating positions accepted by the EN standard.
During testing, the radio is set to its highest transmission levels and placed in positions that simulate use against the body.
This product is compliant with ICNIRP Guidelines with respect to Electromagnetic Fields (EMF) which specifies a Specific Absorption Rate (SAR) limit of 2W/kg. DAS*/SAR: 1.9W/kg (corps/body)
Rechargeable Battery Notice
Do not
- Throw into fire or a hot oven, or mechanically crush or cutting of a BATTERY
- Throw or immerse into water
- Heat to more than 60°C
- Repaire or disassemble
- Leave in an extremely low air pressure environment
- Leave in an extremely high-temperature environment
A power cord is connected to a socket-outlet with earthing connection.
The unit can be operated at an ambient temperature of max. 35°C (95°F). Do not subject it to temperatures below 5°C (41°F) or above 40°C (104 °F).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
PREVENTION OF HEARING LOSS
CAUTION: Listening to music at high volume levels and for extended
durations can damage one’s hearing. In order to reduce the risk of damage to
hearing, one should lower the volume to a safe, comfortable level, and reduce
the amount of time listening at high levels. Headsets should comply with EN
50332-2 requirements.
Safety Information
-
Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer’s components or otherwise cause it to malfunction.
-
Never cover or block the air vents including those located at the base of the computer.
Never cover your computer or AC adaptor with any object.
-
To keep your computer in prime operating condition, protect your work area from direct sunlight.
-
Do NOT expose to or use near liquid, rain, or moisture.
Do NOT use the modem during electrical storms. -
Do not use or expose this device around magnetic fields as magnetic interference may affect the performance of the device.
Conventions For This Manual
CAUTION: This message contains important information that must be followed for safe operation.
NOTE: This message contains information for special situations.
Getting To Know The Basics
Product Specification
This User’s Manual provides technical information of instructions and illustrations on how to operate this notebook for the customer. Please read this manual carefully before using this notebook.
Physical Characteristic
Dimension Weight| 308.8 x 213 x 15.6mm 0,99kg +/- %5
Processor – CPU
Support Processor| 11 Gen. Intel® Core™ i7-1165G7
Graphic Card – GPU
Graphic Card| Iris Xe (96EU)
Memory
DDR4| DDR4
Display
LCD| 14” WUXGA FHD 1920×1200 Narrow Bazel
Audio
Audio Codec
Speaker /MIC
| Realtek ALC256
Azalia Standard-Support, D3 mode support Built-in 2 speakers
Speakers: 2 W each
Digital microphone support
**I/O Port**
DC-In
USB
| x1
x2 USB Type A
x1 Right: (Gen1) (Power off mode support USB
power, & w/bc1.2 protocol )
x1 Left: (Gen1)
x1 Left:USB Type C:
x1 Right: TBT4 (only w/ 5V@3A output ) +W Type-C
x1 Left: USB3.1 gen2 /W Type-C Adaptor /w DP 1.4
HDMI
Audio Combo
Card Reader
| x1
x1
x1 USB3 interface, SD/SDHC/SDXC, UHS-I speed
Connecter: Full SD size
Webcam
HD webcam| Infrared capability for facial reconition camera IR Camera w/
D-MIC2
Communication Port
Wireless LAN +BT| M.2 2230 w/ CNVI interface (Intel WiFi6 AX series)
IEEE802.11AX201mode support
Input
Keyboard Pointing Device| Membrane KB:277106mm ,Travel=1.2mm Backlight
= Single zone /White Lighting
Outline/PCB: 13080mm +/- 0.1mm /Glass Enable/Disable area :10mm10mm Palm Rejection: Support
Power
AC Adapter| Automatics Voltage adjustment between 100 and 240VAC
| 50/60Hz, 65 Watts (19V/3.42A), 3 Pins
Battery| Li- polymer Battery, SW Gas Gauge IC, soft pack,
| 1. 3cells (3s1p/4570mAh) 53Wh
CAUTION: MODEL IS DESIGNED TO USE WITH THE DC INPUT: 65 Watts , (19V/3.42A)
Preparing your Computer
-
Connect the AC adaptor’s DC output plug to the DC IN jack
-
The display panel can be opened to a wide range of angles for optimal viewing.
-
Press the power button to turn on your notebook computer
Product Overview
Please become familiar with each component before you operate the computer.
Top-Open View
NOTE The product’s color/ LED color, I/O port, indicator location, and
specification will depend upon the actually shipping product.
CAUTION: When you are not using the computer, keep the LCD screen closed to protect it from dust.
-
Camera Status LED
The Camera Status LED shows the Camera status. -
Camera
A device that allows you to record video or take photographs with your computer.
Infrared capability for facial recognition camera can be used to identify and authenticate user to unlock notebook, conduct payment and other security functions. -
Microphone
Built-in microphone IR CCD MIC*2 -
LCD Screen
Displays of your notebook computer. -
Power Button
Press this button to turn the computer’s power on or off.
Power ON: White
Suspend: White, Slow / Smooth, Blinking White (3Sec/Cycle)
Power Off: OFF
-
Keyboard
The keyboard provides keys with comfortable travel (The keyboard legend will depend on the spec / region) -
Caps Lock Status LED
Default: ON (White) -
Touchpad LED indicator/ Touchpad switch
-
Touchpad/Click pad
Touch-sensitive pointing device which functions like the mouse.
Bottom Side View
NOTE The product’s thermal vent will depend upon the actually shipping
product.
CAUTION:
To reduce the possibility of heat-related injuries or of overheating the
computer, do not place the computer directly on your lap or obstruct the
computer air vents. Use the computer only on a hard, flat surface. Do not
allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not
allow the AC adapter to come into contact with the skin or a soft surface,
such as pillows or rugs or clothing, during operation.
-
Vents
The thermal vents are designed to cool the internal components and
avoid overheating. -
Speakers
RAM / SSD / WLAN Compartment View
NOTE Specification will depend upon the actually shipping product.
If need to upgrade SATA SSD to PCIE SSD, Please contact technical support and after-sales service .
Right Side View
-
Thunderbolt™4 (USB Type C 3.1)
Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. -
USB Port (Gen1)
Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. -
HDMI Port
Connected to the screen, or home theater system. -
Power Connector
Connects the AC adapter into this connector.
Left Side View
-
Kensington® Lock Port
To be secured using Kensington® Lock Port security products. -
USB Port (Type C)
Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. -
USB Port (Gen1)
Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. -
Card Reader
- USB3 interface, SD/SDHC/SDXC, UHS-I speed
- Connecter: Full SD size
-
Audio Combo ( Mic In Jack/Audio Out Jack)
Connects amplified speakers, headphones or microphone into this jack.
Front Side View
Back Side View
Getting Started
AC Adapter
Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately.
Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.
Note that the AC adapter included in the package is approved for your
notebook; using other adapter model may damage either the notebook or other
devices attached to it.
CAUTION: The use of inferior extension cords may result in damage to your notebook. Your notebook comes with its own authorized AC adapter. Use of a different AC adapter or cable extension which is not authorized for use will void warranty protection if damage to hardware is found in association to said adapter or extension cable.
NOTE The power adapter can become hot when in use. Please be sure the AC adapter is not covered with any materials keep it away from exposed parts of your body. The AC adapter appearance may vary depending on your region.
Knowing The Keyboard
The following defines the colored hot keys on the Keyboard. The colored
commands can only be accessed by first pressing and holding the function key
while pressing a key with a colored command.
NOTE The number of keys available on your keyboard will depend on which country/region your computer is configured for.
For Keyboard Users
To activate these functions, press the hot key associated with the desired function as below:
Keypad | Function Description **** |
---|
Suspend:
|
Press this key combination (Fn+F1) to enter sleep mode.
Windows Lock/On:
| Press this key combination (Fn+F2) to turn Windows Lock/On .
Display Mode:
|
Press this key combination (Fn+F3) to enable Display Mode.
RADIO On/Off:
| Press this key combination (Fn+F4) to turn all radios on or off.
Mode Switch:
| Press this key combination (Fn+F5) to quick switch – Basic mode / Silent
mode.
Keypad| Function Description
---|---
Keyboard Brightness Up:
| Press this key combination (Fn+F6) to increase brightness of Keyboard.
MUTE:
| Press this key combination (Fn+F7) to enter MUTE mode.
Volume Down:
| Press this key combination (Fn+F8) to enter Volume down mode.
Volume Up:
| Press this key combination (Fn+F9) to enter Volume up mode.
Brightness Down:
| Press this key combination (Fn+F10) to decrease brightness of LCD display.
Brightness Up:
| Press this key combination (Fn+F11) to increase brightness of LCD display.
Print Screen:
| Press this key combination (Fn+F12) will capture the entire screen.
Search Charm:
| Press this key combination (Windows logo key+Q) to open the search charm and
search apps.
Settings Charm
| Press this key combination (Windows logo key+I) to open the settings charm.
Share Charm :
| Press this key combination (Windows logo key+H) to open the share charm.
Devices Charm:
| Press this key combination (Windows logo key+K) to open the devices charm.
Using the touchpad / clickpad
The touchpad / clickpad is a rectangular electronic panel located just below your keyboard. You can use the static-sensitive panel of the touchpad / clickpad and slide it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons.
Press the left (1) and right (2) buttons located on the edge of the touchpad /
clickpad to make selections and run functions. These two buttons are similar
to the left and right buttons on a mouse. Tapping on the touchpad / clickpad
produces similar results.
Click twice will open or close touchpad functionality
Touchpad Usage
Touch Pad Gesture
Modern touchpad gesture:
A modern touchpad should support the core touch gestures described in the
following table.
Item | Gesture Name | Gesture |
---|---|---|
1 | One Finger | Left Click – Double Click |
2| Move Cursor
3| Tap + Slide
4| Two Finger| Scroll / Pan
5| Pinch – Zoom
6| Three Finger| Multitasking
Bios Setup
About Bios Setup
When To Use Bios Setup?
You may need to run the BIOS Setup when:
- An error message appears on the screen during the system booting up and is requested to run SETUP.
- You want to change the default settings for customized features.
- You want to reload the default BIOS settings.
How to Run BIOS Setup?
To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish to enter Setup, either restart the system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your references only. The actual setting screens and options on your Notebook may be different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during POST that provide a approach to change some setting and configuration the user prefer, and the changed values will save in the NVRAM and will take effect after the system rebooted. The setup uses a menu interface to allow the user to configure their system and the features are briefly listed as follow. Press [F7] key for Boot Menu.
NOTE The drivers, BIOS and utilities bundled in the support DVD may vary by models and are subject to change without notice.
BIOS Setup Menu
Once you enter the BIOS Setup Utility, the Main Menu will appear on the
screen.
Select the tags to enter the other menus.
- Main Menu Show system overview about memory size and setting of system time and date.
- Advanced Menu To select the XD feature enable or disable XD feature only work with Intel platform + Windows.
- Security Menu Install or clear the password settings for supervisor and user.
- Boot Menu Configure Settings during System Boot.
- EXIT Menu Save or discard the changes before leaving the BIOS Setup Menu.
Main Menu
-
System Time
This item allows you to set the system time. There is a small internal (CMOS) battery which is designed to maintain your system clock. It is designed to maintain time even when the PC is powered down or in sleep mode. The time format is [hour: minute: second].
Use [+] or [-] to configure system Time. -
System Date
This item allows you to set the system date. The date format is [day: month: date: year]. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.- Day Day of the week, from Sun to Sat, which is determined by
- BIOS (read-only).
- Month (Month) The month from 01 (January) to 12 (December).
- Date (Date)date from 01 to 31.
- Year (Year) The year can be adjusted by users.
-
Total Memory
This allows you to see the total amount of memory
Advanced Menu
- Wake on LAN: Enable/Disable integrated LAN to wake the system.
- Serial ATA HDD: It will show AHCI SATA HDD info.
- NVMe Device: It will show NVMe Device info.
- Intel Virtualization Technology: When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
- RAID mode reminder: Please update strip size in BIOS to 128K in order for RAID to optimize performance.
- Keyboard BackLight Features : Light Effect [Disabled/Breathing/Wave/inbow/Marquee/Raindrop]Select keyboard light mode when power on.
- Over Clocking Feature: Performance Menu for Processor and Memory.
- Core Voltage Offset: [50] Specifies the Offset Voltage applied to the IA Core domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
- Offset Prefix [+/-]
- Thunderbolt(TM) Support : [Enabled/ Disabled]
Security Menu
Change Administrator Password
When this item is selected, a message box shall appear on the screen as below:
Enter New Password
-
Type a maximum of 20-digit password and press [Enter].
-
The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. It is extremely important to keep record for any BIOS password which is set as it can not be reset even with the removal of a CMOS battery for the security of your PC.
-
Select Change User Password to give or to abandon password setting same as Change Administrator Password item above.
-
Note that Administrator Password feld allows users to enter and change the
settings of the BIOS SETUP UTILITY, while User Password feld only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. -
The Password Check item is used to specify the type of BIOS password protection that is implemented.
-
To clear a set Administrator Password/ User Password, just press [Enter] under Change Administrator Password/ Change User Password feld when you are prompted to enter the password. A message box will pop up confrming password will be disabled.Once the password is disabled, the system will boot and user can enter setup without entering password.
Key Management:
Enables expert user to modify Secure Boot Policy variables without full authentication.
Boot Menu
-
Boot Configuration:
Configure Settings during System Boot. -
LAN Remote Boot [Disabled]:
Boot from LAN or not. -
Set Boot Priority
Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. -
Hard Disk Drive / USB Hard Disk Drive
Specifies the Boot Device Priority sequence.
Exit Menu
-
Save Changes and Reset
Exit system setup after saving the changes.F4 key can be used for this operation. -
Discard Changes and Exit
Exit system setup without saving any changes. ESC key can be used for this operation. -
Restore Defaults
Restore/Load Defaults values for all the setup options. F3 key can be used for this operation.
FCC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file with the FCC and can be
found under the Display Grant section of
www.fcc.gov/eot/ea/fccid after searching on
FCC ID: 2AKHFAX201NG .
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>