SUNSKY NC0349 4G Intelligent Solar Energy Alert Camera User Manual
- June 5, 2024
- sunsky
Table of Contents
SUNSKY NC0349 4G Intelligent Solar Energy Alert Camera
Product Diagram
Quick Setup
- Insert the USB cable of the solar panel to the “USB” Silicon Flap on the bracket base for battery charging.
- Press the Power switch to turn ON/OFF the camera,
- Wait the voice prompt step by step for pairing the camera with the APP.
Note
- Before you turn on the camera, please close the silicon flap to avoid rain leakage.
- Make sure your phone is connecting to the 2.4Ghz wifi first before you pair the camera.
PRODUCTS & PACKING LIST
-
Product picture
-
Packing list
- Solar panel
-
1*Screw kit
-
1″Hexagon spanner
-
6 Screws
-
6 Tapping screw
-
1″ USB charging cable
-
User manual
-
Position paper
-
1 External Power cable 2M
INSTALLATION
- Integrated installation
- The height should be 2.6meters.
- The camera slopes down
- 15-30° degrees.
- Separated installation
APP INSTALLATION
Scan the following QR codes or search for UBox from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
APP REGISTRATION
Open the app then input your E-mail address then press ‘Register’. Check and select to agree on the agreement then your E-mail bOx will get a verification code. ( For better user experience, please allow us to open all permissions to avoid missing any notifications from the app.) 3.2. 2. Input the “Verification code and press ‘Next. if you did not found the mail you might find the code in your email spam box. ) Set the login password and confirm the login password. Then press Register to the next step. (For your password safety, the passWord requires more than 8 characters plus a combination of letters) Enter your E-mail address, and input your login password. Then press Login’.
W-FI CONNECTION
- Press ‘Add Family’ then set the room or position as per reminders.
- Enter your family name and then press ‘Next.
- input the necessary information just like Country, Province, then press ‘Done.
- Press ‘Add a device’ to add a smart device.
- Insert the SIM card into the device then put the battery into the device, some models need to install the antenna.
- After the power on the device, wait for about 1 minute the device bule LED light-up Then press next.
- If the device’s blue LED does not light up, please check below config notes.
- Find the UID QR code on life, then use APP scan the QR code.
- APP is searching the device on the internet it may take 5-60 seconds.
- Select the name and device location then press ‘Done.
- The device will enter into the device list automatically. Setup success! The device is ready to use.
- Notes about PIR detection *User can change the PIR detection sensitivity in device settings. we recommend setting sensitivity at “Disabled” or “Low” to reduce false alerts and save the battery power in noisy environments.
- *Disabled: disabled PIR detection. Low: delay 7 seconds PIR detects a moving.
- *Medium: delay 5 seconds PIR detects a moving.
- *High: delay 1 second PIR detects a moving.
DEVICE SETTING
- Enter to select your family or smart device location
- Turn on/off the push notification.
- Settings: Sharing, Cloud storage, Delete the device.
- Press to enter the preview section.
- Press to add a smart device
- Smart device basic settings
- Could set Storage management, Flip screen,
- Environmental model, PIR detection, Sleep time,
- Power frequency, LED indicator, Device name
- Could check the information device name,
- Device ID, Model, FW version, Manufacturer,
- Check for the FW updates..”
Check〝my account〞name and change the password; Check and purchase the Cloud storage; Check and purchase the AI Cloud Facial Recognition; Check and add my friends list and permission; Set the default voice and resolution for the devices; Press to add a smart device.
- Click the Calendar icon on the right top corner, then choose the date to playback the videos from cloud storage.
- Choose the desired date to check all videos from the cloud.
SPECIAL NOTES!
- The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device’s wake-up time and the number of wake-ups. Therefore, the PIR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times and extend battery life. When the battery is low, please charge the battery immediately.
- Keep the device in the range of your router. Make sure the device is placed close to the Wi-Fi router. If there have to be thick or insulated objects between the device and the Wi-Fi router, which may lead to a weak Wi-Fi signal, please make sure the Wi-Fi signal is at a good level before you start using the device.
- It is a delicate device with a low power consumption design. Every time the device is awakened and will work for a few seconds. After that, the device will enter standby mode to save power. You can set the work time in the app settings.
- Because mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function on your phone to receive push messages.
- This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.