JL AUDIO MM105 MediaMaster IP67 Weatherproof 4-Zone Premium Source Unit Owner’s Manual

June 5, 2024
JL AUDIO

JL AUDIO MM105 MediaMaster IP67 Weatherproof 4-Zone Premium Source Unit

JL-AUDIO-MM105-MediaMaster-IP67-Weatherproof-4-Zone-Premium-Source-
Unit-PRODUCT

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the
    receiving antenna.

  •  Increase separation between the equipment and the receiver.

  •  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

  •  Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

SAFETY CONSIDERATIONS

  •  Only use this product in vehicles with 12 volt, negative-ground electrical systems. This product is not certified or approved for use in aircraft.
  •  Securely mount this product so that it does not come loose in the event of a collision, sudden jolt or as a result of repeated vibrations during normal use.
  •  Do not replace the power wire fuse with one of a different value. Never bypass the fuse.
  •  Operate your audio system in a manner that still allows you to hear necessary noises to operate your vessel safely (horns, sirens, etc.).

INSTALLATION CONSIDERATIONS

  •  Read this manual completely before installation. Professional installation is recommended.
  •  Install in a dry, well-ventilated location that does not interfere with your factory-installed systems. If a dry environment is not available, a location that is not exposed to heavy splashing may be used.
  •  While this product is designed to be water-resistant, it should never be submerged under water or subjected to high-pressure water spray.
  •  Before drilling, verify that you will not be drilling into an exterior panel/hull, fuel tank, gas/brake line, wiring harness, or other vital system.
  •  Carefully route all system wiring away moving parts and sharp edges; secure with cable ties or wire clamps and use grommets and loom where appropriate to protect from sharp edges.JL-AUDIO-MM105-MediaMaster-IP67-Weatherproof-4-Zone-Premium-Source-Unit-FIG-1

GENERAL MOUNTING

JL-AUDIO-MM105-MediaMaster-IP67-Weatherproof-4-Zone-
Premium-Source-Unit-FIG-2

GENERAL CONNECTIONS

JL-AUDIO-MM105-MediaMaster-IP67-Weatherproof-4-Zone-
Premium-Source-Unit-FIG-3

WIRING & HARNESS CONNECTIONS

Label Wire Color Connection

+12VDC

| ****

Red

| Switched Positive (+12V) Source

• Install 5A fuse at connection point)

GROUND| Black| Metal Chassis Ground or Negative Battery Post

• Make all ground connections at the same location

ILLUMINATION| Orange| Positive (+12V) Lighting Circuit
AMP TURN-ON| Blue| Positive (+12V) Turn-On Output
Label| Description| Connection Notes


ZONE 1 (MAIN)

| Black RCA| Left Channel Signal Output| ****







See Audio Zone Setup on pages 18-19 for configurable settings

Red RCA| Right Channel Signal Output
Clear RCA| Subwoofer Signal Output


ZONE 2

| Black RCA| Left Channel Signal Output
Red RCA| Right Channel Signal Output
Clear RCA| Subwoofer Signal Output


ZONE 3

| Black RCA| Left Channel Signal Output
Red RCA| Right Channel Signal Output
Clear RCA| Subwoofer Signal Output


ZONE 4

| Black RCA| Left Channel Signal Output
Red RCA| Right Channel Signal Output
Clear RCA| Subwoofer Signal Output|


AUX 1

| Black RCA| Left Channel Signal Input| ****


2V or 1V RMS

Input Sensitivity

Red RCA| Right Channel Signal Input


AUX 2

| Black RCA| Left Channel Signal Input
Red RCA| Right Channel Signal Input
SIRIUSXM| 10-pin Con- nector| Connect to SiriusXM-Connect Vehicle Tuner (sold separately)
ANT| Antenna| Connect to Motorola style antenna
IPHONE / IPOD USB 1| USB 1

Connection

| USB connection for iPhone®/iPod® (MFi Certified) or USB storage device (2.1 A charging output)
USB 2| USB 2

Connection

| USB connection for media player or USB storage device (500 mA charging output)
REMOTE| 5-pin Threaded Connector| Connect to MMR wired remote controllers (sold separately)


NMEA LEN 1

| 5-pin NMEA 2K

Micro-C Connector

| ****

Connect to MMR-40 Network Controller or NMEA 2000® network

GENERAL CONTROLS

JL-AUDIO-MM105-MediaMaster-IP67-Weatherproof-4-Zone-
Premium-Source-Unit-FIG-4

GENERAL CONTROL FUNCTIONS

Below is a list of general commands, including many common operations. The functionality of each control will vary depending on the current source and menu selected.

| Source/ Power| • Press to turn the unit ON

• Press to display the SOURCE: Select menu

• Press and hold to turn the unit OFF

---|---|---

| Volume/ Select| • Rotate to adjust volume

• Rotate to scroll thru menu options

• Press to enter selected options

| • Rotate/press to access/adjust the Audio Zone Level menu screen (see page 15 for more info)
|

SUB

| • Press to access subwoofer trim settings

• Press VOL/SEL to advance through each zone’s subwoofer trim level

• Rotate VOL/SEL to adjust the selected subwoofer trim volume

| Back/ Menu| • Press to go back or return to the Now Playing Screen (AM/FM/AUX1/AUX2)

• Press to access main menu options

(SiriusXM®/HD Radio™/DAB+/USB1/USB2/Bluetooth®)

|

Favorites

| • Press and hold to store a channel (AM/FM/SiriusXM) as a preset (star will turn solid)

• Press to view your list of stored presets and the Favorites: Edit menu.

|

Settings

| • Press and hold to access the System Settings: Main Menu

• Press to access the Audio Zone: Tone & Balance menu

• From a highlighted zone in the Audio Zone Level menu, press (and repeat) to quickly change the Level Control Mode (Relative, Absolute, Off).

|

Forward

| Press to:

• Tune to the next frequency (AM/FM) or next channel (SiriusXM/DAB+)

• Select the next track (USB1/USB2/Bluetooth)

Press and hold to:

• Seek to the next channel (FM)

• Skip forward ten frequency steps (AM)

• Initiate faster tuning (SiriusXM/DAB+).

• Fast-forward (USB1/USB2)

|

Backward

| Press to:

• Tune to the previous frequency (AM/FM) or previous channel (SiriusXM/DAB+)

• Select the previous track (USB1/USB2/Bluetooth)

Press and hold to:

• Seek to the previous channel (FM)

• Skip backward ten frequency steps (AM)

• Initiate faster tuning (SiriusXM/DAB+).

• Fast-rewind (USB1/USB2)

|

Mute/ Pause/ Resume/

| • Press to mute audio (AM/FM/SiriusXM/DAB+/ AUX1/AUX2)

• Press to pause or resume the current selection (USB1/ USB2/Bluetooth)

| • When the Audio Zone Levels screen is displayed, press to mute all audio (AM/FM/SiriusXM/DAB+/ AUX1/AUX2/ USB1/USB2/Bluetooth)| • Press and hold to access the USB: Play Options menu (USB)

BLUETOOTH® AUDIO

You may wirelessly stream audio from a Bluetooth compatible device from up to 35 ft. away (11 m). Up to 8 devices can be paired to the MM105, but only one streaming device can connect at one time.
Pairing a new device:

  1.  Press on the MM105 to access the SOURCE: Select menu.
  2.  Rotate to highlight Bluetooth and press to enter Bluetooth: Pairing Mode.
  3.  Enable Bluetooth on your streaming device and scan for nearby devices; select MM105 (or your custom name) from your list of available devices to connect. Once connected, you may control your audio selections with the MM105 using the controls listed on page 9 or directly from your device.

Options for managing paired or additional Bluetooth devices can be accessed from the Bluetooth: Main Menu.
To access the Bluetooth: Main Menu, press BACK/MENU while in Bluetooth mode, then use VOL/SEL to make your selections.

USB CONNECTIONS

The MM105 includes two ports to connect with USB storage class devices (thumb drive, digital audio player, etc.).
USB 1: High-speed connection for use with iPhone®/iPod® (MFi Certified) or USB storage device (2.1 A charging output)
USB 2: Full-speed USB storage device connection (500 mA charging output)

Once connected, you may control your audio selections with the MM105 using the controls listed on page 9 or directly from your device.

IMPORTRD

  •  Properly secure the connected device before driving to prevent damage from dropping or sudden acceleration/braking
  •  Control, functionality and display may vary depending on the model and version of iPhone® connected.
  •  When connected via USB port, make sure to unpair or disable the Bluetooth connection to avoid possible playback conflicts.
  •  If you experience abnormal performance during operation, disconnect the iPhone® and check its condition. Restart your iPhone® if performance does not improve.
  •  “Made for iPhone” means that an electronic accessory has been designed to connect specifically to an iPhone® and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPhone® may affect wireless performance.
  •  iPhone®, Lightning and all related marks and logos are trademarks of Apple Inc., registered in the U.S. and other countries.

SIRIUSXM® SATELLITE RADIO

Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the
best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com.
Activating Your SiriusXM Subscription After installing your SiriusXM Connect tuner and antenna, power on your MM105 and select SiriusXM mode.
You should be able to hear the SiriusXM preview channel on Channel 1. If you cannot hear the preview channel, please check the installation instructions to make sure your SiriusXM Connect tuner is properly installed.
After you can hear the preview channel, tune to Channel 0 to find the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference.
Note: the SiriusXM Radio ID does
not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:

As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display: “Subscription Updated”. Once subscribed, you can tune to channels in your subscription plan.

Note:
The activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.

Parental Controls

Some SiriusXM channels contain mature content. When the Parental Controls feature is enabled, channels with mature content are restricted and will require a 4- digit lock code to access. Enabling Parental Controls
1. Press BACK/MENU to access the SiriusXM: Main Menu.
Turn VOL/SEL to Parental Controls and press to enter.
Press VOL/SEL to select Lock Mature Channels. After, you must enter a 4-digit lock code to lock mature content channels. (Parental Control default passcode: 0000)
Use VOL/SEL to enter the 4-digit lock code and select Save when finished.

Changing the Lock Code

  1. Press BACK/MENU to access the SiriusXM: Main Menu.
  2. Turn VOL/SEL to Parental Controls and press to enter.
  3. Turn VOL/SEL to Edit Lock Code and press enter.
  4.  UseVOL/SEL to enter the current4-digit lock code and select Enter when finished.
  5.  Use VOL/SEL to enter the new lock code and select Enter to confirm.

Make sure to save your 4-digit lock code for future reference.

SIRIUSXM MAIN MENU

This allows access to the SiriusXM operational menu options. Refer to the table below for available settings and functionality.

  1.  Press and hold BACK/MENU to access the SiriusXM: Main Menu.
  2.  Turn VOL/SEL to highlight one of the menu settings listed in the table below and press to enter.
  3. Use VOL/SEL  to make selections.
Setting Function
Now Playing Return to the Now Playing Screen
Browse By Channel View list of available SiriusXM channels
Browse By Category View list of available SiriusXM channels by category
My Account View your SiriusXM account status, Radio ID and Reset Tuner

command
Parental Controls| Settings for access to channels containing mature content
Direct Tune| Allows entry for direct channel selection

Album Art
Album art can be displayed for most of the SiriusXM music channels. When album art is not available, the channel logo or the SiriusXM logo will be displayed.

Resetting SiriusXM Tuner Settings A reset will restore all presets and settings, including parental controls, back to their factory defaults.

  1.  Press BACK/MENU to access the SiriusXM: Main Menu.
  2.  Turn VOL/SEL to My Account and press to enter.
  3.  Turn VOL/SEL to Reset Tuner and press to enter.
  4.  Use VOL/SEL to select Confirm.

SYSTEM SETTINGS MAIN MENU

This menu allows access the main operational settings and features of your MM105. Refer to the table below for available settings and functionality.

  1.  Press and hold SETTINGS to access the System Settings: Main Menu.
  2.  Turn VOL/SEL  to highlight one of the menu settings listed in the table below; press to select.
  3.  Use VOL/SEL to make selections.
Setting Function
Name this Device Create a custom name to be displayed on connected Bluetooth

devices and NMEA 2000® networks
Audio Zone Setup| Configure settings for each set of audio zone outputs
AUX Input Sensitivity| Configure the AUX input sensitivity: 2V or 1V RMS (default)
Diagnostic| Displays serial number, hardware and software version info
Display| Configures display and brightness settings
Low Voltage Alert| Notifies of low supply voltage conditions (see below for more info)
Scrolling Text| Enables continuous scrolling of available RDS/track text info
Tuner Region| Configures AM/FM tuner range/scale for a specific region; DAB+ replaces SiriusXM beyond North America
Power-up Settings| Configures display activation upon connection to power.

Low Voltage Alert
This built-in alert notifies when the +12VDC supply voltage drops below 10 volts. If triggered, the unit will enter Safe Mode and a warning tone will be heard through the speakers. A warning will also display on-screen with instructions to turn the unit off until normal operating voltage is restored.

  1.  Press and hold SETTINGS to access the System Settings: Main Menu.
  2.  Turn VOL/SEL to Low Voltage Alert  and press to enter.
  3.  Turn VOL/SEL to select ON or OFF  and press to enter.

AUDIO ZONE SETUP

The MM105 is equipped with four sets of low-voltage, line-level RCA outputs to send audio signals to your aftermarket amplifiers/equipment. Each output pair delivers full-range, low-distortion audio, arranged into four zones. Depending on your equipment and vessel, this will allow you to group speakers of an area together for flexibility and control of audio levels at separate zones. For example, you may prefer to reduce the listening level in an interior cabin, while keeping a louder audio level on the main deck. Access the Audio Zone Setup menu to configure the functionality of each zone.

  1.  Press and hold SETTINGS to access the System Settings: Main Menu.
  2.  Press VOL/SEL to select Audio Zone Setup.
  3.  Use VOL/SEL to make selections.

Refer to the table below and the following page for each zone’s available settings and functionality.

Zone Menu Setting 1 Setting 2

Z1: Zone 1

Z2: Zone 2

Z3: Zone 3

Z4: Zone 4

|

Level Control Mode

| Relative|
Absolute|

Fixed

| 4V RMS Max (default) 2V RMS Max

1V RMS Max

Off|

Rename Zone

| Bow, Bridge, Cabin, Cockpit, Galley, Helm, Stateroom 1, Stateroom 2, Tower, Transom|
Custom Name| Alphanumeric Input
Factory Default|
Max Volume Limit| Max Vol Limit|

Sub 1

Sub 2

Sub 3

Sub 4

|

LPF ( Low Pass Filter)

| Off (default) 60 Hz

80 Hz

100 Hz

Sub Off|
Z2: Zone 2

Z3: Zone 3

Z4: Zone 4

|

Tone Control Mode

| Same as Zone 1|
Independent Tone Control|

SIRIUSXM TROUBLESHOOTING

Advisory messages may appear on the display when a SiriusXM-Connect Vehicle Tuner is connected to the MM105. Refer to the table below for an explanation and suggested corrective actions.

Advisory Message Description

Check Antenna

| The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged.

• Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner.

• Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged.

• SiriusXM products are available at your local audio retailer or online at www.shop.siriusxm.com.

Check Tuner

| The radio is having difficulty communication with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged.

• Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio.

No Signal

| The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal.

• Verify that your vehicle/vessel is outdoors with a clear view of the sky.

• Verify that the SiriusXM antenna is mount on the exterior.

• Move the SiriusXM antenna away from any obstructions.

• Inspect the antenna cable for damage and kinks.

• Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local audio retailer or online at www.shop.siriusxm.com.

Subscription Updated

| The radio has detected a change in your SiriusXM subscription status. Press VOL/SEL to clear the message.

In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription.

In Canada, visit www.siriusxm.ca or call 1-877-438-9677 if you have questions about your subscription.

Channel Unavailable

| The channel that you have requested is not a valid SiriusXM channel or the channel you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle tuner.

Visit www.siriusxm.com for more information about the SiriusXM channel lineup.

Channel Unsubscribed

| The channel that you have requested is not included in your SiriusXM subscription package of the channel that you were listening to is no longer included in your SiriusXM subscription package.

In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel.

In Canada, visit www.siriusxm.ca or call 1-877-438-9677.

Channel Locked

| The channel that you have requested is Locked by the radio Parental Control feature. See Parental Controls, page 13 for more information on the Parental Control feature and how to access locked channels.
No Content| TuneScan is not available. Perform the operation with another preset channel.

SPECIFICATIONS

Electrical

Operating Voltage| 14.4V DC (10V – 15.9V allowable)
Maximum Current Draw| 1.5 A
Standby Current Draw| 120 mA
Fuse Value| 5 A
NMEA 2000® LEN| 1 (Micro-C connector)
Operating Temp Range| -4 F to +158 F (-20 C to +70 C)
Display
Size / Type| 3.5-inch / TFT LCD backlighted
Resolution| 320 x 480
Audio Outputs/Inputs
Output Channels| One stereo pair and mono subwoofer RCA plugs per zone
Output Zone Configuration| Relative, Absolute, Fixed or Off
Maximum Output Voltage| Relative or Absolute: 4V RMS Fixed: Selectable 4V/2V/1V RMS
Output Impedance| 250 ohm
Input Channels| Two stereo pairs of RCA plugs (2V/1V RMS Input Sensitivity)
Tuner
FM Tuner with RDS| 87.5 MHz to 107.9 MHz (0.2 MHz step)
AM Tuner| 530 kHz to 1710 kHz (10 kHz step)
DAB+ Tuner| 170 MHz to 230 MHz
Favorites| 24 presets across all tuners/bands
Bluetooth®
Profile| A2DP v1.2, AVRCP v1.4
Core Specification| Version 2.1 + EDR
Codec| SBC, Qualcomm® aptX™ audio
Connection Range| Up to 35 ft / 11 m
USB
Interface| USB 2.0
Maximum Current Output| USB1: 2.1 A / USB2: 500 mA
Supported Audio Formats| MP3, MP4, WAV, AAC, M4A, M4B
Apple Compatibility| iPhone SE or beyond (functionality contingent upon compatible iOS release)
Dimensions
Unit W x H x D| 5.94 in. x 3.90 in. x 3.94 in. (151 mm x 99 mm x 100 mm)
Mounting Hole W x H| 4.72 in. x 3.25 in. (120 mm x 83 mm)

Limited Warranty – Electronics (USA)
JL Audio warrants this product to be free of defects in materials and workmanship
for a period of two (2) years from the original date of purchase.
This warranty is not transferable and applies only to the original purchaser from an authorized JL Audio dealer. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, JL Audio will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by
the following is not covered under warranty: accident, misuse, abuse, product modification
or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.
Products installed as original equipment by boat manufacturers are covered by the boat manufacturer’s warranty, not JL Audio, Inc.

Warranty is void if the product’s serial number has been removed or defaced.
Any applicable implied warranties are limited in duration to the period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties, therefore these exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

If you need service on your JL AUDIO product:
All warranty returns should be sent to JL Audio ’s Electronics Service Facility freight-prepaid through an authorized JL Audio dealer and must be accompanied by proof of purchase (a copy of the original sales receipt). Direct returns from consumers or non-authorized dealers will be refused unless specifically authorized by JL Audio with a valid return authorization number. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. Coverage may be invalidated as this date is previous to purchase date. Non-defective items received will be returned freight-collect. Customer is responsible for shipping charges and insurance in sending the product to JL Audio. Freight damage on returns is not covered under warranty.

For Service Information in the U.S.A. please contact
JL Audio Customer Service: 954-443-1100 (9:00 AM – 5:00 PM EST)
JL Audio Technical Support: www.jlaudio.com/support
JL Audio, Inc.
10369 North Commerce Pkwy.
Miramar, FL 33025
(Do not send product for repair to this address)
International Warranties:
Products purchased outside the United States of America are covered only by that country’s distributor and not by JL Audio, Inc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

JL AUDIO User Manuals

Related Manuals