SWIT ELECTRONICS BM-H215 4K input FHD Broadcast Monitor User Manual

SWIT ELECTRONICS BM-H215 4K input FHD Broadcast Monitor

Product Information

Specifications

• Brand: SWIT Electronics Co., Ltd.
• Model: BM-H215/215HDR/245
• Input: 4K
• Output: FHD Broadcast Monitor

Product Usage Instructions

Maintenance Precautions

Warning: To reduce the danger of fire or electric shock, do not expose the monitor in raining or wet places. The monitor may create noise when used near high-intensity magnetic fields.

Precautions for Power Supply:

1. Please use the special power adapter specified by the original factory to avoid damage to the product.
2. If using a different DC power supply, ensure that the voltage range, power supply, and polarity meet the requirements.
3. In the following cases, please unplug the power cord and external battery of the product:
   • If you have not used the product for a long period of time.
   • If the power cord or power plug/socket is damaged.
   • If the product is hit or dropped so that the shell is damaged.

Precautions for Product Use:

1. Please do not touch the screen surface directly with your fingers to avoid damage to the screen. The oil on the skin will be difficult to remove if left on the screen.
2. Please do not put pressure on the LCD screen as it is delicate and fragile.
3. Do not place the product in an unstable place as it may be seriously damaged due to falling.

Precautions for Product Cleaning:

1. To clean the LCD screen, please use a dry soft fabric with fluff and a special liquid crystal cleaning agent to remove dust and stains.
2. Do not apply pressure when wiping the LCD screen surface.
3. Please do not use water and other chemical cleaners to wipe the LCD screen surface as they may damage it.

Contents
The user manual contains the following sections:

1. Declaration
2. Precaution
3. Content
4. Packing list
5. Introduction
6. Description
7. Front panel
8. Back panel
9. Display information
10. Setting
11. Dimension
12. Specification
13. Trouble shooting
14. Packing list

Packing List

FAQ

• Q: Can I use water to clean the LCD screen?
  A: No, please do not use water as it may damage the LCD screen surface. Use a dry soft fabric with fluff and a special liquid crystal cleaning agent instead.

• Q: What should I do if the power cord or power plug/socket is damaged?
  A: Please unplug the power cord and external battery of the product and contact the manufacturer for assistance.

• Q: Can I touch the screen surface directly with my fingers?
  A: No, please avoid touching the screen surface directly with your fingers to avoid damage to the screen. The oil on the skin may be difficult to remove if left on the screen.

Declaration

• Any internal technology (including hardware equipment, software design and product trademark) of the product shall be protected by law, and any infringement of intellectual property rights of the product shall be investigated for legal liability。
• All the brand and trademark in this product are protected by law, all other company’s brand and trademark in this product are protected by their owner’s law.
• In order to better service majority users, SWIT products will keep improving and developing, SWIT keep the right to revise and improve this user manual without previous notice.
• The warranty period of this product are two years, the following condition are not covered by the warranty:
• The appearance and the LCD panel are damaged by man-made out force；
  • The amount of defective pixels are under three；
  • Damage the product by using incompatible power adaptor；
  • Damage the product due to violation operation；
  • Disassemble the product when using；
  • Other faults or damages not caused by design ,technology, manufacture and quality.＊ Any sales person have no right to provide extra warranty beyond these terms.
• If you have any advises or requirements about our products during using, please feel free to contact with us via phone or E-mail.
• This manual is applicable to all models of BM-H monitors. The schematic diagram of BM-H215 is taken as an example. Any specification, appearance of the different, this manual will be attached with text.

SWIT Electronics Co., Ltd.

• Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone,
• Nanjing 210038, P.R.China
• Phone: +86-25-85805753
• Fax: +86-25-85805296
• Email: [email protected]
• http://www.swit.cc

Maintenance precautions

Warning

1. To reduce the dangerous of fire or electric shock, do not expose the monitor in raining or wet place.
2. The monitor will create noise when using near high-intensity magnetic field.

Precautions for power supply

1. Please use the special power adapter specified by the original factory to avoid damage to the product.
2.  If other DC power supply is used, ensure that the voltage range, power supply and polarity of the power supply meet the requirements.
3. In the following cases, please unplug the power cord and external battery of the product:
4. If you have not used the product for A long period of time.
5. If the power cord or power plug/socket is damaged.
6. If the product is hit or dropped so that the shell is damaged.

Precautions for product use

1. Please do not touch the screen surface directly with your fingers to avoid damage to the screen, and the oil on the skin will be difficult to remove if left on the screen.
2. Please do not put pressure on the LCD screen, LCD screen is very delicate and fragile.
3. Do not place the product in an unstable place, as the product may be seriously damaged due to falling.

Precautions for product cleaning

1. Clean LCD screen, please use dry soft fabric with fluff and special liquid crystal cleaning agent, to remove dust and stains on the screen.
2. Do not pressure when wiping the LCD screen surface.
3. Please do not use water and other chemical cleaners to wipe the LCD screen surface, chemical agents may damage the LCD screen surface.

Packing list

Introduction

This series of monitors adopt LCD panel, the resolution is up to 1920×1080, H178° / V178° ultra-wide viewing angle, supports 1 channels of 12G/6G/3G/HD/ SD-SDI and has 1 channels of 3G/HD/ SD-SDI, and 1 channel of HDMI 2.0, and has 1 channels of 3G/HD/ SD-SDI 、1 channels of 12G/6G/3G/HD/ SD-SDI ring out, with earphone and speaker output.

Features:

• 1920×1080 IPS LCD Panel 4K/UHD interface, （1x12G-SDI&3x3G-SD Input，2xSDI output，1xHDMI 2.0 Input） 16ch audio bar display, with any selected 2ch output
• Support waveform selection display Y/Cb/Cr/R/G/B /RGB and single line selection mode
• Vector scope, R/G/B/Y histogram, bi-color focus assist 3DLUT（17 x 17 x 17） accurate color correction
• Dynamic UMD and TALLY(TSL3.1, 4.0) display Composition ratio auxiliary line:4:3/13:9/14:9/15:9/16:9/1.85:1/2.35:1/2:1/2.39:1/Custom 1/Custom 2 Support USB firmware upgrade and import Log file.(USB file system supports FAT 32 format only) Support ECO mode

Operation Instructions

Front panel

1. Speaker: For SDI/HDMI embedded audio. (Will not work if earphone is plugged in)

2. F1~F5 function keys: Customize shortcut function keys. Users can set the shortcut keys to different functions according to their own requirements.

3. User1~User4 ：User shortcut key, which can be used to quickly enter the set user mode.
   Long press to save user settings. Please see details in “9. System”

4. INFO: Display setting item. Press “INFO” button to display or turn off relevant status information and audio and video analysis function graph. When opening the menu, press “INFO” to exit the menu with one click

| Brightness: Adjust the brightness. -100~100 adjustable, default value is 0.
---|---
Contrast: Adjust contrast. -100~100 adjustable, default value is 0.
Saturation: Adjust saturation. -100~100 adjustable, default value is 0.
Backlight: Adjust the backlight. 0~100 adjustable, default value is 16.
Volume：Adjust the volume.0~100 adjustable, default value is 36.
Press Brightness, Contrast, Saturation, Backlight, Volume five shortcut keys confirm to select this option, and rotate Menu to adjust the corresponding item value directly. Press the button and automatically cancel the selection without operation within five seconds, and the button light will be off, long press to restore default values；: Adjust the volume.0~100 adjustable, the default value is 36.Long press the volume button to mute.
| Source: Select the input source signal format.

• 6 Menu/Enter: When no Menu is displayed, press the button directly to open the Main Menu; Rotate the knob to select different settings or adjust parameter values, press the knob to set；
• 7 LUT/Firmwar e: Update firmware or import LUT files;
• 8 PHONE: 3.5mm headphone jack is used to monitor the embedded audio signals of SDI and HDMI;
• 9 Power : Power switch;
• 10 Tally lamp : You can select the color of the tally lamp from “Green”, “Red”, or “Yellow”.

Rear panel

1. SDI1 IN & OUT：12G/6G/3G/HD/SD-SDI
2. SDI2 IN &OUT, SDI3 IN,SDI4 IN: 3G/HD/SD-SDI
3. ETHERNET(Network interface) ：1000M high-speed RJ45 Ethernet port, for web external control
4. HDMI 2.0 IN: Will not display HDCP protected content
5. RS485： TSL UMD control port
6. GPI：GPI control port
7. Fan
8. VESA bracket mounting area
9. DC IN： 12V~17V
10. AC IN ：100V~240V
11. Battery plate

OSD

1. Time Code(SDI）
   Under SDI input, the monitor can display Time code information (LTC, VITC1&2). If no Time code info is detected, it will display “TC UNLOCKED”. User can set function keys F1～F5 or GPI pins as “Time Code” to turn on or off this function.

2. Surround
   The def ault channel of surround is 5.1 channel 7 & 8

3. On screen TALLY
   Display TALLY signal from GPI control port.

4. Source ID/UMD
   Display /UMD（TSL3.1/4.0），user can set in the UMD menu

5. Color checker
   After auto calibration, the color gamut and chromatic aberration (△E) before and after the color correction pop up. “Auto Calibration” -“Measure” pops up the gamut value and color difference value (△E) of the previous calibration and this measurement.

6. Audio VU/PPM meters
   Display meters of SDI/HDMI embedded audio or analog audio. The audio meter display channels, on screen positions and background blending are adjustable. can be set in the submenu of“Audio setting ”.User can set function keys F1～F5 or GPI pins as “Audio Bar” to turn on or off this function.

7. Histogram
   User can set function keys F1～F5 or GPI pins as “Histogram” to turn on or off this function.

8. Vector
   User can set function keys F1~F5 or GPI pins as“vector”， The vector scope pattern display positions, colors, background are adjustable. Turning on the gamut map in the case of turning on the vector map can display the gamut ratio of the signal image under DCI-P3/REC709/REC2020

9. Waveform
   User can set function keys F1～F5 or GPI pins as “Waveform” to turn on or off this function.

Key configuration

Steps

1. Press “Menu/ Enter” button, the main menu will pop up from the left top of the screen. The selected main menu highlights in yellow .
2. Revolve “Menu/ Enter” to select submenu, the selected submenu highlights in yellow, press “Menu/Enter” to apply and enter into the selected submenu’s items.
3. Revolve “Menu/ Enter” to select the item which needed to adjust, press “Menu/ Enter”, the selected item and its parameters will be highlighted in yellow
4. Revolve “Menu/ Enter” to change the selected item’s parameter, press “Menu/ Enter” to apply and save the settings.
5. Revolve “Menu/ Enter” to select “Exit”, press “Menu/ Enter” to quit submenu. Select “Exit & Status” under the Main Menu and press to quit Main Menu

Notice

• ＊ The items in gray cannot be set up
• ＊ If there is no operation under the set time, the menu will automatically save settings and quit.＊ If the key inhabit function is turned on, except System menu, all other items are in gray. Please turn off the key inhibit function to adjust the items.

Menu Configuration

Menu configuration introduces the main menu and each sub-menu. Menu items marked * will give more detailed menu description or operation explanation after the list

Exit & Status—Exit the main menu and display the current status of the monitor
Press “Menu/Enter” to bring up the main menu in the top left corner of the screen, the main menu shows the current working status of the monitor.

1. Format
   The current input signal standard is displayed; if there is no recognizable signal input, “No signal” is displayed. When multi-screen is selected for the current channel, the standard of the input signal for each of the four SDI 1/2/3/4 channels is displayed.

2. Input source
   Displays the currently selected channel.

3. Colour temperature
   Displays the currently set colour temperature mode

4. Function key 1 to function key 5
   Displays the function value of the current function key setting

5. Model
   Shows the current monitor model

6. Versions
   Shows the current software version number

Input—Set the color of input video

Fuseli F0u-1ll042-31、019、 Limited 64-940 -100 ~ +100
Green Gain| Adjust Green Gain| -100 ~ +100
Blue Gain| Adjust Blue Gain| -100 ~ +100
Red Bias| Adjust Red Bias| -100 ~ +100
Green Bias| Adjust Green Bias| -100 ~ +100
Blue Bias| Adjust Blue Bias| -100 ~ +100
Reset| Reset the gain and bias values of the settings| /
| |

• 1 Quantization range: Sets the quantization range of the video to suit the input video signal. The default video quantization range is Limited 64-940 for the broadcast application.

Image setting—Setting for the picture preference

Contrast

Brightness

| Adjust contrast

Adjust brightness

| -100 ~ +100

-100 ~ +100

Saturation| Adjust saturation| -100 ~ +100
Sharpness| Adjust sharpness| 0 ~ +100
Backlight| Adjust backlight| 0 ~ +100
| |

Color Management—Setting about video colors

1. Color gamut
   Set the gamut to match the input audio.

2. Gamma
   When Four-screen is selected; the gamma of four signals can be adjusted separately for display

3. HLG System Gamma
   Display tunable only when Gamma is set to HLG1000

4. Multi-colour gamut
   Individual colour gamut for multi-colour gamut, gamma can be adjusted individually, multi-colour gamut default colour gamut Rec.2020, gamma 2.2.

5. LUT import
   Place the cube file that needs to import the monitor in the root directory of the u-disk, insert the u-disk into the USB interface on the front shell of the monitor, and choose to import the corresponding file

Scanning—Setting for picture scan, zoom, etc.

Scanning*1

| Set up a scanning mode that matches the audio to the screen|

Pixel To Pixel, Panel Fit, Native

Zoom Mode2| Set a zoom mode| OFF, Top Left, Top, Top Right, Left, Center, Right, Bottom Left, Bottom ,Bottom Right
Freeze Frame Odd/Even Frame3| Select an image still mode| OFF, ON
| Set to open odd field or even field| OFF, Odd Frame, Even Frame

1. Scanning Panel Fit: Turn on this feature to adapt the video to the entire screen. Native only displays the original mode in the specified mode.
2. Zoom mode: Shown below, the image is divided into 9 regions and adjusted to display in sequence.
3. When the zoom mode is turned on, a rectangle box pops up at the bottom left of the screen, showing the currently selected zoom image area； Open Low Latency Mode， Zoom mode function is turned off.
4. Odd/Even Frame Odd/Even Frame is only displayed in I mode. Open Low Latency Mode and Odd/Even Frame function is turned off.

Control—Setting for TALLY, UMD, IP control to the monitor

SDI4, 4×SDI(2-SI)、 4×SDI(SQ), HDMI, Red Tally, Green Tally, Yellow Tally ,Time Code, Freeze Frame, WFM Type, WFM Single Line, UMD, Marker , Waveform, Audio Bar, Zebra, Vector, Low Latency Mode, Histogram, Focus Assist , False Color
GPI 2Pin
GPI 3Pin
GPI 4Pin
GPI 5Pin
GPI 6Pin

Tally Setting

| Switch on/off Tally light let the display position of On| OFF, ON, Blinking
Tally Position

F1

| Screen Tally Lamp| Top, Bottom Time Code, Color Temp, Freeze Frame ,
F2|

• Set the control function of the function key
• Open or close UMD display

| Waveform, Waveform Type , UMD, Marker, H/V Delay, Blue Only, Audio Bar, Zebra, Vector, Low Latency mode, Histogram, Odd/Even Frame , Focus Assist ,False

Color, CIE

OFF, ON

F3
F4
F5
UMD *2
UMD Color| Set the color of UMD characters| White, Red, Green, Blue, Black ,Gray
UMD Position| Set the position of UMD characters| Top, Bottom
UMD Size| Set the size of UMD characters| Large, Small
| |
UMD Blending| Show the transparency of the UMD background| OFF, LOW, HIGH
Display Type| Set display UMD or source name characters

| Source ID, TSL3.1,TSL4.0
RS485 Address| Set the location of RS485| 1~126
Baud Rate| Fixed for 115200| 115200,8,n,1/38400,8,n,1/9600,8,n,1 -Z, a-z, 0-9, [\]^_`{l}~@?>=<,,/.-+*
Source ID| Set the character that the source name displays| ()’&%$#’’!

1. GPI control
   Connect the GPI remote control terminal through the GPI interface on the real panel of the monitor, turn on “GPI control” and set the function of GPI 1-6 buttons.

2. The GPI control allows you to control both the Tally light and the on screen TALLY light at the same time:

3. UMD
   Select the display type as “UMD”, which can be controlled with TSL UMD.

2

3

|

• NC
• RXD-

| NC
4| NC| RXD- NC
5| NC| NC
6| RXD+| RXD+
7| TXD-| TXD-
8| TXD+| TXD+
| |

Cascade:

Assist— Setting for Vector scope and Histogram patterns

1. WFM Single Line
   Open waveform single-line mode, the monitor shows only one line of audio waveform. Rotate the Menu/Enter knob to select the number of lines of audio signal to display the waveform. (The selection range of the number of lines in a waveform depends on the current signal standard)

2. X-axis/Y-axis position
   When marker select is USER 1, Users can adjust the X position and Y position of the marking line according to their own needs，Coordinate value is adjustable from 50% to 99%；when marker select is USER2，the value of X-axis is adjustable between 0~1920，the value of Y-axis is adjustable between 0~1080.

3. Eye pattern
   Only SDI1 supports eye diagrams.

De-embed— Setting for video/audio analysis functions

1. Audio meter marker
   Audio table display, display 16 channel audio table Type1: Only the audio table is displayed Type2: Display audio decibels, audio alarm signal and left and right channel options

2. Left Channel/ Right Channel

3. Audio meter under SDI showing 16 channel audio meter

4. Audio meter under HDMI, menu shows 8 groups of channels

5. H/V Delay
   H/V Delay is not displayed on HDMI channel.

*Auto Calibration1**

1. Auto Calibration
   The monitor has 3D LUT calibration software built-in, and supports the following color sensor probe to directly plug into front USB port. When start calibration, the monitor will generate standard colors and the color sensor will read the colors one by one and upload result to the monitor by USB connection. The monitor will comparing the generated colors and sensor read colors, to work out 3D LUT cube and calibrate itself automatically.

2. Probe Select
   This monitor supports the following probes models:

Start Calibration Steps

1. Put the monitor into a dark room. Switch on the monitor.
2. Connect the calibration instrument (compatible with x-rite and JETI color measuring instruments) and monitor via USB. Before calibration, ensure that the monitor and the color calibration instrument are in good condition and the monitor aging time reaches 30 minutes.
3. Enter the “Probe Select” and select the currently used calibration probe.
4. Enter the “Start Calibration” and select “yes” to start calibration. The monitor will display the  prompt message and the color position prompt box. Put the sensitive part of the device in the color position prompt box correctly. Note that when placing the calibration instrument; do not squeeze the monitor’s LCD screen.
5. Select “yes” to begin auto calibration. The color calibration instrument will automatically measure the color of the screen and correct the color of the screen. During this process, it is necessary to observe the color calibration progress bar in the color correction prompt box.
6. Press “INFO” to terminate the color correction process at any time. When the prompt color calibration progress reaches 100%, the whole automatic color calibration is completed. After automatic color correction, press the “INFO” button to exit the menu and let the monitor enter the normal display mode.
7. After the automatic color correction, the display screen pops up “Before Calibration” and “After  Calibration”.

Measure

• The monitor has been calibrated in factory. And may need to be re-calibrated after a period of time. Before re-calibrated, the measure function can check the current color to compare with the last time calibrated color, to decide if the monitor needs to be re-calibrated. Connect with the sensor probe and place the sensor probe onto the right position like calibration step. Enter “Auto Calibration” ‒ “Measure”.
• The monitor will generate several colors and finish measure within 30 seconds. And display the result as

System— User profile saving, firmware update

1. Key Lock
2. The “Menu/Enter” button can be operated when the button is locked. “Key Locked” will be displayed on the screen when you press the Locked button or knob.
3. Recall Profile/ Save Profile
4. User Settings provide 4 menu Settings, that is, users can save the current monitor menu Settings as one user Settings (USER1~USER4) according to usage habits. Then, when switching menu Settings, just select the corresponding “USER1~USER4” through the “Recall Profile” item to display the corre-sponding menu Settings.Example：By adjusting the parameters of the color temperature of 2200K, open the necessary auxiliary functions (such as: histogram), set the function key to the desired menu (such as F1 is set to “Blue Only”), and so on, the monitor Menu Settings can be “USER Settings” save as “USER” 1, rotating the “Menu/Enter” choose to load the USER Settings “set to the current” USER 1 “mode, the monitor Menu item value will show” USER 1 “mode to save Menu.
5. IP control
   Connect the monitor to the LAN through an ETHERNET interface, and the Monitor can be controlled by web page.

Enter Menu- Syste m ‒ IP/Net Mask/Gateway/Port to set the monitor address. Set the computer Ethernet IP addresses at the same LAN environment as the Monitor. Launch any of a web browser on the computer, and enter URL: Monitor IP+ Port (Example: 192.168.1.99.8080). The web server control page will be displayed. Fig1 ：IP Address setting
Fig2： Web page

• Used crossed wired cable for computer-monitor directly connection.
• Use straight-through wired cable for Router connections.
• Please seek help from your webmaster for any network connections.

Webserver page control interface

Upgrade

System software can update by USB interface, and steps are as follows:

1. Download the latest software package into the U-disk root direction.
2. Open the monitor and plug U-disk into USB into port.
3. Follow the step “Menu-System-Update”, the monitor will update automatically. 4.When update finishes, press “Power” button, close and reboot the monitor.

Remark

1. Only copy one model and software version into the U-disk root direction.
2. Never shutdown the power during the update progress.

Multiview setting*1

| Quad View、PBP、PIP
PIC1| Select channel 1 when set to Quad view or PIP

| SDI 1、SDI 2、SDI 3、SDI 4、HDMI
PIC2| Select channel 2 when set to Quad view or PIP| SDI 1、SDI 2、SDI 3、SDI 4、HDMI
PIP Window position| Select PIC2 position when set to PIP| Bottom Left、Bottom Right ﹑Top Left、Top Right、Centre
Border| Switch on/off the border| ON,OFF

1. Multi-screen settings
2. Selecting the button Source in Multi-screen for the Multi-screen settings to be adjustable; some menus are hidden in Multi-screen;
3. When Multi-screen is selected for the channel, the quantization range, colour gamut, gamma, UMD and Payload ID of each screen can be adjusted separately.
4. Multi-screen type
   If there is no signal on the 4th SDI channel, an HDMI signal appears on the 4th channel.

Size
Monitor（unit：mm）

Specification

LCD Performance

Model| BM-H215| BM-H215HDR| BM-H245
Size| 21.5 inch| 21.5英寸| 23.8 inch
Display area| 476.064×267.786mm| 476.064×267.786mm| 527.04×296.46mm
Resolution| 1920×1080| 1920×1080| 1920×1080
Display Color| 16.7M| 16.7M| 16.78M
Display ratio| 16:9| 16:9| 16:9
Brightness| 400cd/m2| 1000 cd/m2| 400cd/m2
Contract| 1000:1| 1000:1| 1000:1
Viewing Angle Input /Output| H/V: 178°/178°| H/V: 178°/178°| H/V: 178°/178°
Input| BNC×4| 12G/6G/3G/HD/SD-SDI×1，6G/3G/HD/SD-SDI×3
HDMI×1| HDMI input
RS-485×2| GPI×1、UMD×1
USB×1|
ETHERNRT|
Output| BNC×2| 6G/3G/HD/SD-SDI×2
RS-485×1| UMD×1
Other specification      AC：100V～240V
Working voltage| DC/Battery：12V～17V
Power consumption| ≤60W
Working temperature| 0℃～+50℃
Working humidity Storage temperature| 10%～90%
Storage humidity| ﹣15℃～﹢60℃
| 10%～90%
Dimensions （mm）| 531×364×67.00mm| 529×363×73mm| 581×392×67mm
Net weigh（ t w/o stand）| 6.6KG| 7.28KG| 7.8KG
Packing weight included| 10KG| 9.36KG| 10.7KG

Supported Format： Signals below can display on the monitor

19201080I60
15| 1920×1080/60I| √| √| —| √| 19201080I60| 19201080I60| 19201080I60
16| 1920×1080/23.98PSF| √| √| —| √| 19201080PSF23.98| 19201080PSF23.98| 19201080PSF24
17| 1920×1080/24PSF| √| √| —| √| 19201080PSF24| 19201080PSF24| 19201080PSF24
18| 1920×1080/23.98P| √| √| —| √| 19201080P23.98| 19201080P23.98| 19201080P24
19| 1920×1080/24P| √| √| —| √| 19201080P24| 19201080P24| 19201080P24
20| 1920×1080/25P| √| √| —| √| 19201080P25| 19201080P25| 19201080P25
21| 1920×1080/29.97P| √| √| —| √| 19201080P29.97| 19201080P29.97| 19201080P30
22| 1920×1080/30P| √| √| —| √| 19201080P30| 19201080P30| 19201080P30
23| 1920×1080/48P| √| √| —| √| 19201080P48| 19201080P48| 19201080P48
24| 1920×1080/50P| √| √| —| √| 19201080P50| 19201080P50| 19201080P50
25| 1920×1080/59.94P| √| √| —| √| 19201080P59.94| 19201080P59.94| 19201080P60
26| 1920×1080/60P| √| √| —| √| 19201080P60| 19201080P60| 19201080P60
27| 2048×1080/23.98PSF| √| —| —| √| 20481080PSF23.98| —| 20481080PSF24
28| 2048×1080/24PSF| √| —| —| √| 20481080PSF24| —| 20481080PSF24
29| 2048×1080/25PSF| √| —| —| √| 20481080PSF25| —| 20481080PSF25
30| 2048×1080/29.97PSF| √| —| —| √| 20481080PSF29.97| —| 20481080PSF30
31| 2048×1080/30PSF| √| —| —| √| 20481080PSF30| —| 20481080PSF30
32| 2048×1080/23.98P| √| —| —| √| 20481080P23.98| —| 20481080P24
33| 2048×1080/24P| √| —| —| √| 20481080P24| —| 20481080P24
34| 2048×1080/25P| √| —| —| √| 20481080P25| —| 20481080P25
35| 2048×1080/29.97P| √| —| —| √| 20481080P29.97| —| 20481080P30
36| 2048×1080/30P| √| —| —| √| 20481080P30| —| 20481080P30
37| 2048×1080/47.94P| √| —| —| √| 20481080P47.94| —| 20481080P50
38| 2048×1080/48P| √| —| —| √| 20481080P48| —| 20481080P48
39| 2048×1080/50P| √| —| —| √| 20481080P50| —| 20481080P50
No.| Format| Input terminal| Signal format shown in the Status Display as
---|---|---|---
SDI1| SDI2/3/4| QuaSdDlIink| HDMI| SDI1 out| SDI2 out| HDMI 20481080P60
40| 2048×1080/59.94P| √| —| —| √| 20481080P59.94| —|
41| 2048×1080/60P| √| —| —| √| 20481080P60| —| 20481080P60
42| 3840×2160/23.98P| √| —| √| √| 38402160P23.98| —| 38402160P24
43| 3840×2160/24P| √| —| √| √| 38402160P24| —| 38402160P24
44| 3840×2160/25P| √| —| √| √| 38402160p25| —| 38402160p25
45| 3840×2160/29.97P| √| —| √| √| 38402160P29.97| —| 38402160P30
46| 3840×2160/30P| √| —| √| √| 38402160P30| —| 38402160P30
47| 3840×2160/47.94P| √| —| √| √| 38402160P47.94| —| 38402160P50
48| 3840×2160/48P| √| —| √| √| 38402160P48| —| 38402160P48
49| 3840×2160/50P| √| —| √| √| 38402160P50| —| 38402160P50
50| 3840×2160/59.94P| √| —| √| √| 38402160P59.94| —| 38402160P60
51| 3840×2160/60P| √| —| √| √| 38402160P60| —| 38402160P60
52| 4096×2160/23.98P| √| —| √| √| 40962160P23.98| —| 40962160P24
53| 4096×2160/24P| √| —| √| √| 40962160P24| —| 40962160P24
54| 4096×2160/25P| √| —| √| √| 40962160P25| —| 40962160P25
55| 4096×2160/29.97P| √| —| √| √| 40962160P29.97| —| 40962160P30
56| 4096×2160/30P| √| —| √| √| 40962160P30| —| 40962160P30
57| 4096×2160/47.94P| √| —| √| √| 40962160P47.94| —| 40962160P48
58| 4096×2160/48P| √| —| √| √| 40962160P48| —| 40962160P48
59| 4096×2160/50P| √| —| √| √| 40962160P50| —| 40962160P50
60| 4096×2160/59.94P| √| —| √| √| 40962160P59.94| —| 40962160P60
61| 4096×2160/60P| √| —| √| √| 40962160P60| —| 4096*2160P60

3G supports level A/levelB; Support RGB444

• √: The format is supported
• —: The format is not supported

Trouble-shooting

connected, and then press “POWER” button to turn on the monitor
Unstable power voltage| Reconnect to power supply
BNC or HDMI cable loose contact or not correctly connected| Check and correctly connect the BNC or HDMI cable
The attached battery is no power| Change battery
Using DIY power supply but the polarity is reversed| Refer to the provided power supply, reconnect the power.
Image or color abnormal| Bad contact of BNC or HDMI cable| Change the Video cable
Video signal has Interference| Remove the interference source(s)
Improper adjustment of the color parameters| Adjust the “Recall profile” to “Default” under “System” submenu
Distortion of the image| Reset the Aspect ratio
Set to Blue only| Turn off the“ pure color“ setting
Turn on the “Focus Assist” function| Turn off the “Focus Assist ”function
Turn on the “False Color” function| Turn off the “False Color” function
No audio output| Set mute state| Cancel mute state or spin ” MENU/ENTER ” to adjust volume
Bad contact of signal cable| Change signal cable
Wrong connection or bad contact of Audio cable| Connect to the correct input socket

SWIT Electronics Co., Ltd.
Add: 10 Hengtong Road, Xin’gang, Nanjing Economic and Technological Development Zone, Nanjing 210038, P.R.China
Tel: +86-25-85805753
Email: [email protected]

SWIT Electronics Europe GmbH
Add: Hochstr. 17, 47228 Duisburg, Germany
Tel: +49(0)20659799339
Email: [email protected]

SWIT Electronics America, Inc
Add: 3350 Scott Boulevard 61-02, Santa Clara, CA 95054, USA
Tel: (408)260-8258, 1-866-986-SWIT(7948)
Email: [email protected]

References

• SWIT Global Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>