KLARSTEIN 10040205 Skyscraper Ice Smart 4-in-1 Air Cooler & Fan User Manual

SKYSCRAPER ICE
SMART
Air Cooler

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10040208

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Check the voltage on the rating plate before use. Only connect the appliance to sockets that correspond to the voltage of the appliance.

• Keep the appliance and cable away from sources of heat, sharp objects, or anything that may cause damage.

• Do not place the cord under carpets. Do not cover the cord with small clothes, shirts, or other similar elements. Place the cord away from traffic areas in order to avoid any risk of tripping over.

• Do not operate the appliance if the cable or plug is damaged.

• If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Indoor use only.

• Do not cover the machine during use.

• Place the appliance on a stable flat horizontal surface. Make sure the appliance is in an upright position during use.

• Ensure the appliance is switched OFF before connecting to the mains power supply.

• Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and main supply connections.

• Do not leave this appliance unattended when it’s in use. Turn off and disconnect the appliance when you leave the room for an extended period.

• Switch off the appliance and unplug from the mains socket when not in use, before filling, cleaning, or other maintenance.

• To disconnect the appliance, switch it “OFF”, and then remove the plug from outlet.
  Do not pull the cord to disconnect the plug.

• This device may be only used by children 8 years old or older and persons with limited physical, sensory, and mental capabilities and/or lack of experience and knowledge,  provided that they have been instructed in the use of the device by a responsible person who understands the associated risks.

• Use the appliance only as described in this manual.

• Do not insert your fingers into the openings of the guard.

• Do not leave hair, tissue, tablecloths, clothes, or curtains near all openings of the fan, they could be sucked into the fan and be taken within the internal moving parts which could cause injury or damage.

• Do not use the appliance in wet or damp locations such as bathrooms.

• Do not operate the appliance when it’s not mounted on its wheels or if it’s lying on the side.

• Make sure the cord is completely extended before use.

• When in operation, evaporative coolers moisturize the ambient air. Overhumidification of residential rooms should be avoided. Recommendation: 40-50 % relative  humidity. Excessive humidity of the air can damage the home and cause health problems.

• The appliance may only be set up on water- and moisture-proof flooring materials (spilling some drops of water is unavoidable when the content of the tank is changed).

• With each and every change of tank content, completely remove residual water from the equipment. To prevent nucleation, remove residual water from the equipment and water tank every time after three days of use.

Special instructions

• This device can be used by children over 8 years of age and persons with limited physical, sensory, or mental abilities or lack of experience and knowledge if they have been supervised or instructed in the safe use of the device and understand the dangers involved. Children must not play with the device. Cleaning and maintenance of the air cooler must not be performed by children without supervision.
• Be aware that high humidity can promote the growth of biological organisms, such as mold.
• Make sure that the area around the air cooler does not become damp or wet. If moisture occurs, turn down the power or stop the humidification function. Ensure that absorbent materials such as carpets, curtains, drapes, or tablecloths do not become damp.
• Never leave water in the tank when the appliance is not in use.
• Empty and clean the air cooler before storage. Clean the storage before the next use.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product.
• The batteries contain environmentally hazardous substances. They must be removed from the product before it is scrapped and disposed of safely.

WARNING
The danger of injury! Make sure that children do not swallow the battery. If the button cell battery is swallowed, it can cause severe internal burns in only 2 hours and lead to death.  If you think that batteries may have been swallowed, consult a doctor immediately.

PRODUCT OVERVIEW

ACCESSORIES

START AND OPERATION

Carefully remove all p packaging materials and retain them for future storage/use. Make sure there is no residual foam left in any of the components. No tools will be required to assemble this tower evaporative cooler.
Filling the water tank
Fill water into the water tank before using the cooling or humidifying function of the air cooler. Turn the tank knob to the left, pull the tank halfway out, and pour water into the water tank. Close the water tank again after filling.

Pay attention to the water level when filling the water tank. The water level should not be higher than the MAX mark and not lower than the MIN mark. Use clean water to fill the water tank. After filling, push the water tank back into the drawer of the appliance and lock the water tank.

Note: When used for the first time, there may be a slight odor and discoloration of the water. This is not a health hazard.

Using the icebox
The appliance contains two ice boxes for extra cooling.

1. Place the icebox in a freezer compartment.
2. Place the frozen icebox in the tank. After about 10 minutes, the water temperature in the tank will be lower than the ambient temperature.

Note: Never open the icebox and do not swallow the ice.

REMOTE CONTROL

Inserting the battery
Open the battery compartment cover on the back of the remote control, and insert a 3V CR2032 battery. The remote control can then be used.

Use a coin to open the battery compartment. Insert the coin into the slot on the back of the remote control and turn it as indicated on the remote control. Pay attention to the positive and negative poles when inserting the battery. Point the remote control at the sensor and press one of the function buttons.

Remote control

| ON/SPEED| Power ON and adjusts speed.
---|---|---
| OFF| Power OFF.
| MODE/WIFI| Adjusts the airflow mode. Switch on the WiFi function.
| TIMER| The timer function of up to 7.5 hours.
| SWING| Oscillating air louvers.
| COOLER/HUMIDIFIER| Controls cooling/humidification function.

BUTTON FUNCTIONS AND DISPLAY INDICATORS ON THE APPLIANCE

WIND PATTERN

ON/SPEED & OFF| After the tank is filled with water, connect the tower evaporative cooler to a power outlet. The unit will beep twice, indicating that the cooler is in standby mode at this time. Press the ON/SPEED button to turn on the tower evaporative cooler. To adjust the fan speed, press the ON/SPEED button again until your desired speed has been reached. To turn the tower evaporative cooler off and revert back to standby mode, press the OFF button.
---|---
COOLER/ HUMIDIFIER| After the desired fan speed has been selected, press the COOLER/HUMIDIFIER button to activate the cooling/ humidifying function. This powers the water pump cools the air and adds moisture to your air at the same time. The snowflake icon will also be visible on the display panel once the cooling/humidifying function has been selected.
MODE| Setting the airflow mode is optional. To set the airflow mode, Press the MODE button.

**** •  Manual Mode: Indicated by the three circular icons on the display panel, this allows you to set the fan speeds manually.
•  Sleep Mode: Indicated by the moon icon on the display panel, this setting will gradually lower the fan speed at different intervals. If the fan speed is set to high, the cooler will run for 30 minutes on high speed, 30 minutes on medium speed, and then continue to operate on low speed.
•  Natural Mode – Indicated by the palm tree icon on the display panel, this setting will adjust the airflow speed between low, medium, and high.

WIFI| When switched on, press and hold the MODE/WIFI button for 5 seconds. After a beep sounds, the WiFi indicator finishes quickly after approx. 5 seconds and the app network can be configured in standard mode. If the connection is not established within 3 minutes, the WiFi indicator goes out. To re-establish the connection, press and hold the MODE/ WIFI button for 5 seconds. After the beep sounds, the WiFi module is reset, the WiFi indicator finishes quickly after about 5 seconds and the app network can be configured in standard mode. If the WiFi indicator flashes quickly, press and hold the MODE/WIFI button again for 5 seconds. After the beep sounds, the WiFi indicator flashes slowly after about 5 seconds and the app network can be configured in compatibility mode.

Notes on the WiFi function:

**** 1. If the unit is switched off within 10 seconds after it is switched on, the WiFi indicator returns to the state before it was switched off. If the unit is switched off after 10 seconds, the WiFi indicator goes off and changes to low power mode. You must press and hold the setting button for 5 seconds to restart.
2.  During the pairing process, if the network is not configured within 3 minutes, the WiFi indicator goes off. You must press and hold the setting button for 5 seconds to restart.
3. When pairing is complete, the router switches off and the WiFi indicator goes out. When the router is switched on again, it is automatically paired and connected.
4. When using the WiFi function, the WiFi indicator must finish quickly. A WiFi router (must be able to connect to the external network) and a mobile end device (e.g. smartphone) are required to use the Klarstein app. The Klarstein app must be installed on the mobile end device that is also connected to the WiFi network.

---|---
TIMER| This tower evaporative cooler is equipped with a 7.5-hour programmable timer. To set the timer, press the TIMER button. Each press of this button will add 0.5 hours to the set time. The set time will be indicated in the middle of the display panel.
SWING| To activate the oscillation feature, press the SWING button. The evaporative cooler’s air louvers will automatically move from side to side, which increases air circulation and distributes air more evenly.

DEVICE CONTROL BY SMARTPHONENatural mode
This model is based on the set speed. The exact wind pattern is as follows:Example: Wind pattern for natural mode in high speed
The motor will run at high speed at an interval of 5 seconds, in mid-speed at an interval of 5 seconds, runs to low speed per 5 seconds, then stops at 3 seconds without any wind.
And again the motor runs at mid-speed for 10 seconds, then to high speed for 10 seconds, then at mid-speed for 5 seconds, then runs to low speed for 5 seconds, then stops at 3 seconds!
Again the motor runs to mid-speed for 5 seconds, then at high speed for 10 seconds, then runs to mid-speed for 5 seconds, then at low speed for 5 seconds.
The whole cycle lasts 76 seconds and is repeated continuously.

Night mode
In this mode, the speed is gradually reduced, depending on the set speed. The exact wind scheme is as follows:

When in night mode, for instance, if you set high speed with natural mode, the motor will run 30 minutes in high speed under natural wind mode first, then 30 minutes in mid-speed under natural wind mode, then to low speed, and keep this speed until the end.

If you set mid-speed with night mode, the motor will run 30 minutes in mid- speed under natural wind mode first, then to low speed, and keep this speed until the end.

If it‘s the low speed with night mode at the very first time, it will keep this speed all the time.
Note: It is recommended to select the low-speed mode for night mode when sleeping, as this mode is intended to give the user a more comfortable feeling of wind.  If you run the appliance at a high speed all the time in night mode, you may feel uncomfortable and get cold at night.

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone but also gives you access to recipes and additional information.
Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3.  Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app.

App Download
Use the scan function of your smartphone to scan the QR code and save the app on your smartphone.
Note: The app provides further information on how to use the app and helps on how to connect to your device as soon as you open it for the first time.

|
https://apps.apple.com/app/id1479571307#?platform=iphone| https://play.google.com/store/apps/details?id=com.chaltec.klarsteinrn&hl=en

Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:

1. The device is not plugged in. Make sure that your device is plugged into an electric socket.

2. The device is not in pairing mode. Make sure that the WiFi indicator (LED) on the smart device control panel is blinking as described in the ‘Reset WiFi settings‘ instruction of your smart device (instructions are usually available on the device connection process).

3.  The WiFi access point does not operate on 2.4 GHz. Make sure that your access point operates on the 2.4 GHz band and that you have a separate SSID on the 2.4 GHz band. If you are not sure about the operating band of your access point, please contact your internet provider company.
   Important: Please note that if your WiFi router is dual-band – operating on both 2.4 GHz and 5 GHz bands – you need to separate the SSIDs for each band and use the 2.4 GHz SSID for connection.

4. Firewall settings of your WiFi network; the firewall setting of your WiFi network may not allow the Klarstein app to configure the WiFi settings on your smart device. Please make sure that you are not using a public WiFi network, e.g. airports,  dormitories, companies, etc.

5. Different credentials are used in smartphones and the app. Make sure that the WiFi credentials entered in the Klarstein app are the same as the ones that your smartphone is connected to.
   Following the above-mentioned points, if your smart device still fails to connect to the app, please contact us via email for support: appsupport@go- bbg.com

CLEANING AND MAINTENANCE

• Regular cleaning and maintenance are important to increase the life of the appliance.
•  Switch off the appliance and always unplug the appliance before cleaning it.

Cleaning the appliance
Clean the surface of the appliance with a damp cloth. Do not use abrasive cleaners or harsh detergents and solvents.
Cleaning the water tank

• Pull out the water tank as described in the instructions.
• Clean it with a damp cloth and wash up the liquid and remove any deposits.

Cleaning the dustproof filter and the Cooler Master filter

To avoid overloading the dust protection filter, clean the filter at least once a month.

1. Remove the dustproof filter and turn the cooling pad knob as shown in the illustration.
2. Clean the dustproof filter with a detergent or a soft brush.
3. Switch off the appliance, clean the cooling pad in detergent water, then rinse it with water and let it dry.

Install filters

1. Reinstall the filters in the following order, one after the other: Water tank, CoolerMaster, and dustproof filter.
2. Connect the appliance to make sure it is working.
3. Check that the dustproof filter is correctly installed.

Storage

1. Unplug the appliance and repack it to protect it from dust if you are not going to use it for a long time.
2. Make sure the cooling pad, filter, and water tank are dry before packing.
3. Store the appliance in a dry and well-ventilated place.

TROUBLESHOOTING

the plug is plugged into an outlet. The unit should beep twice once the power supply is connected.
The water tank is not locked into the unit.| Make sure the water tank is locked into the back of the unit.
The unit does not cool at all.| There is insufficient water in the tank.| Check the water level in the tank and make sure there is enough water.
The cooler/humidifier button was not pressed.| Press the COOLER/HUMIDIFIER button.
The pump is defective.| Contact customer service if there is an issue with the water pump.
Cooling is not sufficient.| The cooling pad is not sufficiently saturated with water.| Wait a few minutes for the cooling pad to be fully saturated with water.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out bout local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
The complete declaration of conformity of the manufacturer can be found at the following link: use. berlin/1004020

References

• bbg.com
• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>