CARiD mpn2575370 Steering Wheel Remote Control SWC Instruction Manual

CARiD mpn2575370 Steering Wheel Remote Control SWC

In Home screen, press SWC icon to enter SWC settings. It will show as below.

Description

1. Saved functions
2. Steering wheel input (voltage)
3. Functions
4. Map the f unction to the steering wheel control
5. Save the function to the steering 4 5 6 7 8 wheel control
6. Reset to default
7. High voltage steering wheel input
8. Low voltage steering wheel input

Steering Wheel learning Process

Before learning, press to reset RESET icon to remove any previous settings.

1. Input a steering wheel key. The voltage will show as on description #2 above.
2. Tap the ASSIGN icon as shown on description #4 above, tap #2 to select key then tap the function as shown on description #3 above to map the steering wheel key.
3. Tap the CONFIRM icon as shown on description #5 above to save the settings.

SWC Connecting Wires

APPLICABLE VEHICLES

IMPORTANT

This unit only works with analog steering wheel controls.Does not support any data bus system.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>