IBD 1639 Glucometer Smart Sensor User Manual
- June 5, 2024
- IBD
Table of Contents
IBD 1639 Glucometer Smart Sensor
SENSOR FOR MEDICATION
The GlucoMedi Smart Temperature Sensor should be kept with your medication to ensure it can continuously measure the temperature at which it is stored or transported. Simply insert the sensor in your bag/carry case along with your insulin or medication. The GlucoMedi Sensor app will show you the updated and current temperature and will send you an alert when the optimal temperature range that you’ve inputted has been exceeded. You can now take the appropriate action on the go.
PACKAGE INCLUDES
- 1 Sensor
- 1 Back clip
- 1 Lanyard
- 1 Bracket
- 1 3M tape
FEATURES
- Real-time temperature monitoring
- Push notifications to alert you when the temperature exceeds the limit of your input value
- Displays readings in charts/graphs
- Ability to save and export data
- Easy installation
DOWNLOAD THE APP
The GlucoMedi Sensor app is available on Apple app store and Google Play Scan the appropriate QR code for a link to the app download page.
ADD DEVICE
- Follow these steps to connect the sensor to the app
- Remove the battery insulation sheet from the sensor
- Run the “GlucoMedi Sensor” app on your smart phone
- Place your sensor close to your phone to connect it to the app
DEVICE SETTINGS
CHART DISPLAY
TEMPERATURE SETTINGS
SPECIFICATIONS
- BATTERY: CR2477 3V 100mAH
- STANDBY CURRENT : 20uA
- PROTOCOL: Bluetooth 5.0
- WIRELESS RANGE: 50m in ideal conditions
- OPERATING TEMPERATURE: -20°C to 85°C / -4°F to 185°F
- TEMPERATURE ACCURACY: +0.3°C / +0.5°F (standard) 0.5°C/ +0.9°F (maximum)
- WORKING TIME: About 12 months
- WIRELESS TYPE: 2.4GHz
- SIZE; 46mm x 46mm x 15mm
IMPORTANT SAFETY INSTRUCTIONS
Please make sure to follow all the instructions. Do not attempt to repair or service the GlucoMedi Smart Temperature Sensor yourself. Refer all servicing to qualified service personnel. Disclaimer: Be sure to check the manufacturer- recommended storage instructions for your medication before making decisions regarding temperature limits and warning alerts.
CONTACT
- For more information, visit our website: www.ibdmedical.com.au
- Customer Support email: cs@ibdmedical.com.au Phone: (02) 8398 7520
- Address: 31/330 Wattle Street, Ultimo NSW 2007