IBD T11 Car Stand Wireless Charger Instruction Manual

Car Wireless Charger
Instruction Manual

Car Wireless Charger Manual

Product Name: Car stand wireless charger (Intelligent sensing)
Power: lSW, lOW, 7.SW, SW
Effective transmission distance: 1-6mm
Size: Middle disk diameter 101.3mm72.6mm33.3mm
Charging interface: USB TYPE-( Packing list Car bracket x 1, Manual Xl, Data linexl, Car 。 utlet base(clip)× 1

Functional components

Specifications

1. Weight: 1 18.9g
2. Material: ABS+PC Vacuum plating
3. Input voltage/current: 5V/2A, 9V/1.67A
4. Output power: 15W, 10W, 7.5W, 5W automatic identification
5. Charging frequency:110.5-205KHz
6. Charging distance: 0-6mm
7. Support Specifications: Qualified with QI Wireless Protocol Charging
8. Support QC wireless fast charging equipment such as: HUAWEI P40 Pro/Mate30/Mate20/Mate RS/iPhone 14/iPhone 14 Pro/ iPhone 14 Pro Max/iPhone 13/iPhone 13 Pro/iPhone 13 Pro Max/ iPhone 12/iPhonel2 Pro/iPhone 12 Pro Max/iPhone 11/iPhone 11 Pro/ iPhone 11 Pro Max/iPhone X/iPhone XS Max/iPhone XR/iPhone 8/ iPhone 8X/Samsung Galaxy Note20/Samsung Galaxy Notel0+5G/ Samsung Galaxy NotelO/Samsung Galaxy Note9/Samsung Galaxy Note8/Samsung S20/Samsung Galaxy 510+/Samsung Galaxy S10/ Samsung Galaxy S9+/Samsung Galaxy S9/Samsung Galaxy S8+ Other Qi devices that support wireless charging
9. Devices that do not support wireless charging can be charged by purchasing wireless receivers that meet Qi standards.

Instructions For Use

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
2. Connect the USB port of the data cable to the charging interface on the car (e.g. cigarette lighter switching charger or using Qc3.0 car charger to makeIf you use the car charging head without fast charging, there may be other problems such as slow charging)
3. The device clip clips the air outlet and can also be placed elsewhere
4. After the device is powered on with 5-9V DC power, the LOGO atmosphere light will light up and automatically check the tightness and reset once. The red and green lights will flash alternately to start the reset and turn on the red light. When the front of the object is 5cm-20cm close to the device, it will automatically sense to open its arms. After placing the phone, the device will automatically clamp the phone. At this point, wireless charging will automatically charge the phone. After detecting wireless charging, it will switch to a green light (for phones with wireless charging function). When taking out the phone, it is necessary to touch the inductive power or the mechanical button on the upper right corner of the rear case. When touching the position of this inductive point with your handWhen pressed lightly on the right button, the device automatically opens its arms and takes out the phone.
5. The equipment has overvoltage protection, over temperature protection and magnetic field protection,Short circuit protection, if the equipment is abnormal, it will automatically stop working.
6. The fuselage equipment has a built-in batte,y, and the brncket can bepened wit hout connecting the pwer data cable The dsing and tightening wo ,ks no,mally (wireless cha,ging does not wo ,k ), touch the front or back When the sensing position is opened,  the wake up logo atmosphe,e light is on for 5 seconds and automatically goes out, and the mobile phone is put on automatically

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

 Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperature,humidity or corrosive environment to avoid damaging the device’s circuit

Thank You For Using This Product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>