KLARSTEIN 10034640 MAXFRESH Air Cooler Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
- KLARSTEIN 10034640 MAXFRESH Air Cooler
- TECHNICAL DATA
- SAFETY INSTRUCTIONS
- DEVICE OVERVIEW AND CONTROL PANEL
- KEY FUNCTIONS
- COMMISSIONING AND OPERATION
- CLEANING
- HOW TO USE THE ICE BOXES
- TROUBLESHOOTING
- DISPOSAL CONSIDERATIONS
- MANUFACTURER & IMPORTER (UK)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KLARSTEIN 10034640 MAXFRESH Air Cooler
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damage. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10029393, 10029394, 10034640 |
---|---|
Power supply | 220-240 V ~ 50-60 Hz |
Power consumption | 65 W |
Water tank volume | 6 litres |
SAFETY INSTRUCTIONS
-
Check the voltage on the rating plate before use. Only connect the appliance to sockets that correspond to the voltage of the appliance.
-
Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
-
Do not place the cord under carpets. Do not cover the cord with small clothes, shirts or other similar elements. Place the cord away from traffic areas in order to avoid any risk of tripping over.
-
Do not operate the appliance if the cable or plug is damaged.
-
If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Indoor use only.
-
Do not cover the machine during use.
-
Place the appliance on a stable flat horizontal surface. Make sure the appliance is in an upright position during use.
-
Ensure the appliance is switched OFF before connecting to the mains power supply.
-
Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and main supply connections.
-
Do not leave this appliance unattended when it’s in use. Turn off and disconnect the appliance when you leave the room for an extended period.
-
Switch off the appliance and unplug from the mains socket when not in use, before filling, cleaning or other maintenance.
-
To disconnect the appliance, switch it “OFF”, and then remove the plug from the outlet. Do not pull the cord to disconnect the plug.
-
This device may be only used by children 8 years old or older and persons with limited physical, sensory, and mental capabilities and/or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
-
Use the appliance only as described in this manual.
-
Do not insert your fingers in the openings of the guard.
-
Do not leave hair, tissue, tablecloths, clothes or curtains near all openings of the fan, they could be sucked into the fan and be taken within the internal moving parts which could cause injury or damage.
-
Do not use the appliance in wet or damp locations such as bathrooms.
-
Do not operate the appliance when it’s not mounted on its wheels or if it’s lying on the side.
-
Make sure the cord is completely extended before use.
-
When in operation, evaporative coolers moisturize the ambient air. Over-humidification of residential rooms should be avoided. Recommendation:
40- 50 % relative humidity. Excessive humidity of the air can damage the home and cause health problems. -
The appliance may only be set up on water- and moisture-proof flooring materials (spilling some drops of water is unavoidable when the content of the tank is changed).
-
With each and every change of tank content, completely remove residual water from the equipment. To prevent nucleation, remove residual water from the equipment and water tank every time after three days of use.
Special instructions
- This device can be used by children over 8 years of age and persons with limited physical, sensory or mental abilities or lack of experience and knowledge if they have been supervised or instructed in the safe use of the device and understand the dangers involved. Children must not play with the device. Cleaning and maintenance of the air cooler must not be performed by children without supervision.
- Be aware that high humidity can promote the growth of biological organisms, such as mold.
- Make sure that the area around the air cooler does not become damp or wet. If moisture occurs, turn down the power or stop the humidification function. Ensure that absorbent materials such as carpets, curtains, drapes or tablecloths do not become damp.
- Never leave water in the tank when the appliance is not in use.
- Empty and clean the air cooler before storage. Clean the storage before the next use.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product.
- The batteries contain environmentally hazardous substances. They must be removed from the product before it is scrapped and disposed of safely.
WARNING
The danger of injury! Make sure that children do not swallow the battery. If
the button cell battery is swallowed, it can cause severe internal burns in
only 2 hours and lead to death. If you think that batteries may have been
swallowed, consult a doctor immediately.
DEVICE OVERVIEW AND CONTROL PANEL
- Handle
- Control panel
- Ventilation lamellae
- Vibrating lamella
- Air inlet
- Transparent window of the water tank
- Water tank
- Rollers
- Natural breeze
- Night mode
- Cooling
- Preset
- Timer
- Swing
KEY FUNCTIONS
Standby mode
After the device has been switched on, all lamps light up briefly. As soon as
the lamps are off again, the device is in standby mode.
ON/OFF key
When you press the key in standby mode, the fan runs at level 1. As soon as
you press the key again, the fan stops. The unit stops, all lights go off and
the unit switches to standby mode.
SPEED button
When the fan is running, you can adjust the speed with the SPEED key. Press
the key several times in succession to adjust the speed. The display shows the
corresponding speed level.
Mode key
Press this key while the fan is running to select the desired mode. Press the
key several times in succession to select the modes in the following order:
Natural > Night Mode > Normal Mode. The corresponding icon will light up.
Wind Direction Button
Press this button while the fan is running to change the wind direction. Press
the key several times in succession to change the wind direction as follows:
Swing right/left > Swing off.
Cooling key
If you press the key during operation, the cooling function is started. The
water pump starts and the cooling LED turns on. If you press the key again,
the cooling function is deactivated. The pump stops and the cooling LED goes
out.
Timer/preset key
Press the key several times in succession during operation to set the off
timer in the following sequence: 1 h > 2 h > 3 h > … > 15 h. Press the key in
standby mode to set the switch-on timer in the following sequence: 1 h > 2 h >
3 h > … > 15 h. When the preset time is reached, the fan will start
automatically. The preset running time is 2 hours in oscillating mode. After
this time the device goes off. Other functions are not available during this
time.
Water leakage protection
If the water tank leaks, the pump stops and the unit emits 3 warning sounds.
If the unit is in cooling mode, the fan is not affected. If the unit is in
humidification mode, the motor will stop if the unit has the corresponding
protection function. The protection is active only in cooling or
humidification mode.
COMMISSIONING AND OPERATION
Installation
- Remove the unit from the packaging and check that the unit, the remote control, 2 iceboxes and the 4 wheels are included.
- Install the wheels before operating the unit. To do this, press the shaft at the end of the wheels into the recesses at the bottom of the unit (see picture). Push the shaft in firmly until the roller is properly seated.
- Place the device on a level surface. Make sure that the socket corresponds to the voltage indicated on the device plate.
Fill with water
- Unplug the power cord from the wall outlet.
- Pull the water tank out of the unit.
- Empty old water if you have not used the unit for a long time.
- Fill the tank to the Max mark at the maximum so that the tank does not overflow.
Remote control
The keys on the remote control have the same functions as the keys on the
control panel.
Storage
If you are not going to use the unit for a long time, drain the water and let
the fan run at normal temperature for a while. After the unit is completely
dry, put a plastic bag over it and store it in the original box.
CLEANING
If you use the device for a longer period of time, dirt can accumulate in the tank and on the nebulizer and influence the cooling effect. We, therefore, recommend that you clean both parts every 2 weeks. Always disconnect the plug from the socket before cleaning. Before putting the unit back into operation, make sure that the nebulizer is correctly seated, otherwise, the unit will not run properly or the motor could be damaged. If you have to remove the nebulizer, make sure that the unit is switched off. Otherwise, water may spray out or the unit may leak.
HOW TO USE THE ICE BOXES
- Do not open the ice box during operation and do not consume the ice crystals inside.
- Place the ice box in the freezer for 4 hours and then place it in the water tank. The water tank should be filled before you put the ice boxes in it.
- The icebox will cool down the water, creating a cooler airflow.
- You can use the ice box permanently.
- Insert the icebox as shown in the picture on the right so that you do not damage the water pump.
TROUBLESHOOTING
Error | Possible cause | Solution |
---|---|---|
No air flow | No power. | Plug in the connector. |
The device is not switched on. | Switch on the device with the ON/OFF key. | |
The device is damaged. | Contact the manufacturer. | |
The device cannot be switched on. | The switch is broken. | Contact the |
manufacturer.
The internal connection cable is loose.
The device cannot
be switched off.
| The device is broken.| Contact the manufacturer.
Abnormal noise| Foreign body in the device.| Remove all foreign objects.
A slat is loose.| Contact the manufacturer.
The motor is broken.| Contact the manufacturer.
Problem with humidification and cooling.| The water filter is clogged.| Clean
the water pump and the tank.
The water pump is broken.| Contact the manufacturer.
The fins do not
vibrate.
| The sync motor is broken.| Contact the manufacturer.
The water pump is very noisy.| No water in the tank or the water level is too
low.| Switch off the device and refill the water.
The water pump is broken.| Contact the manufacturer.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham-
by-Sea BN43 6RE United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>