logitech 936050 G Pro X Tkl Lightspeed Gaming Headset User Guide

June 13, 2024
Logitech

logitech logo 936050 G Pro X Tel Lightspeed Gaming Headset
User Guide

936050 G Pro X Tkl Lightspeed Gaming Headset

logitech 936050 G Pro X Tkl Lightspeed Gaming Headset PRO X 2 LIGHTSPEED
SETUP GUIDE

logitech 936050 G Pro X Tkl Lightspeed Gaming Headset -
feager

GENERAL HEADSET OPERATION

  1. Power switch
    – When power on LED will light solid green for 5 seconds if battery power >= 10% Light will be red for 5 seconds if battery power is <=10% Headset will power down automatically after 30 minutes of no audio to save battery life  To resume use, turn the power off, then back on again Timeout value can be adjusted in G HUB

  2. Volume wheel
    – Rotate up to increase OS volume
    – Rotate down to decrease OS volume

  3. Microphone mute toggle
    – Microphone is active when red is not visible
    – Microphone is muted when red is visible

  4. USB C charging port
    – Use provided USB A to USB C charging cable to charge headset by plugging into USB port on PC
    – Cable is for charging only – audio will not play over USBlogitech 936050 G
Pro X Tkl Lightspeed Gaming Headset - feager1

  5. Microphone
    – For optimal voice pickup, place foam ball approximately two fingers’ width from the corner of your mouth
    – Blue VO!CE functionality can be enabled using G HUB software

  6. Bluetooth / LIGHTSPEED Toggle
    – Press to toggle between BT and LIGHTSPEED modes LED indicator will turn fixed blue for 5 seconds when put into Bluetooth mode, or cyan for 5 seconds when put into LIGHTSPEED mode

PC SETUP INSTRUCTIONS

  1. Insert the mic boom completely into headsetlogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - feager2

  2. Insert LIGHTSPEED wireless adapter into USB port of your PC

  3. Toggle headset power switch on (green light will appear when first powered on when battery is at or above 10% – LED will turn red if battery below 10%)logitech 936050 G Pro X Tkl Lightspeed Gaming Headset - feager3

  4. Open Windows sound settings and confirm that the headset is set as default Output and Input device
    Sound
    Output
    Choose your output device
    Speakers (PRO X 2 LIGHTSPEED)
    Certain apps may be set up to use different sound devices than the one selected here. Customize app volumes and devices in advanced sound options.
    Device properties
    Master volume Troubleshoot
    Manage sound devices
    Input
    Choose your output device
    Microphone (PRO X 2 LIGHTSPEED)

  5. (Optional) Download Logitech G HUB software to access advanced features Download at logitechG com/ghublogitechG.com/ghub
    logitechG.com/support/pro-x-2

PAIRING HEADSET WITH LIGHTSPEED WIRELESS ADAPTER

  1. Plug in LIGHTSPEED Wireless Adapter (if already plugged in, un-plug and re-plug in)
  2. Remove the left earpad cushionlogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - feager6
  3. Use a paperclip to long press the headset pairing buttonlogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - feager7
  4. Use a paperclip to press the LIGHTSPEED wireless adapter pairing button

BLUETOOTH PAIRING

  1. Turn on headset by sliding power switch

  2. Press BT / LIGHTSPEED toggle button Power light will turn blue to indicate BT modelogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - feager 9

  3. Press and hold BT / LIGHTSPEED button
    – Headset LED will quickly blink blue

  4. Follow Bluetooth connection steps for your device
    – LED will turn solid blue for 5 seconds when pair is completelogitech
936050 G Pro X Tkl Lightspeed Gaming Headset - feager 10

SWITCHING BETWEEN BLUETOOTH AND LIGHTSPEED

Short press the Bluetooth / LIGHTSPEED toggle button
– LED indicator will turn fixed blue for 5 seconds when put into Bluetooth mode, or cyan for 5 seconds when put into LIGHTSPEED modelogitech 936050 G
Pro X Tkl Lightspeed Gaming Headset - feager11

USING THE HEADSET IN WIRED MODE

  1. Power off headset
    – Headset must be powered off to operate in wired mode

  2. Plug the included 3 5mm cable into the 3 5mm jack on the headset
    NOTE:
    – Do not plug 3 5mm cable into the headset microphone jacklogitech 936050 G
Pro X Tkl Lightspeed Gaming Headset - headse2

  3. Plug the other end of the included 3 5mm cable into the 3 5mm jack on the audio source devicelogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - headset3

HOW TO MUX IN AN AUX SOURCE

  1. Headset must be setup in LIGHTSPEED mode
  2. Plug one end of the included 3 5mm cable into the 3 5mm port of the LIGHTSPEED wireless adapterlogitech 936050 G Pro X Tkl Lightspeed Gaming Headset - LIGHTSPEED 1
  3. Plug the other end of the included 3 5mm cable into the 3 5mm port of the audio source you’d like to MUX into the wireless signal
    The Mixed source will stay at a constant volume, whereas the wireless signal can be volume adjusted with the volume wheellogitech 936050 G Pro X Tkl
Lightspeed Gaming Headset - LIGHTSPEED2

logitech logo©2023 Logitech Logitech, Logitech G, Loge and their respective logos are trademarks
or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries
All other trademarks are the property of their respective owners
WEB-621-002312 004

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals