KLARSTEIN 10032029 Triest Coffee Grinder Instruction Manual

www.klarstein.com
TRIEST
Coffee Grinder
10032029

Dear customer,
Congratulations on the purchase of your appliance. Please read the following instructions carefully and follow them to prevent potential damage. We accept no liability for damage caused by disregarding the instructions and improper use. Please scan the QR code to access the latest operating instructions and further information about the product.

https://use.berlin/10032029

TECHNICAL INFORMATION

SAFETY INSTRUCTIONS

• Read all safety instructions carefully.
• Do not let the power cord hang loosely over the edge of the table and keep the cord away from hot surfaces.
• Switch off the device and pull the power plug out of the socket before replacing accessories and/or removing accessories that move while the device is in use.
• Unplug the device when not in use, before disassembling or assembling it, and before cleaning it.
• Do not put the device base underwater or try to clean it in the dishwasher. The device will be damaged if the device base is kept underwater and/or the container is filled with water. Only the upper device cover can be rinsed under running water.
• Supervise children and other people in need who are in the vicinity of the device while the device is in use.
• While using the coffee grinder, keep your fingers away from the grinding mechanism.
• Do not remove the machine top cover while the blade is still moving.
• Use extreme care when handling and cleaning the sharp cutting blades.
• Improper use of the device that is not recommended by the manufacturer can lead to injuries.
• Before using the coffee grinder, check the grinder for foreign matter.
• The appliance can only be used by persons with reduced physical, sensory or mental capabilities and/or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance and understand the hazards involved.
• The device should not be used by children. Keep the device and the power cord out of the reach of children.
• Only use the device for its intended purpose.
• Never leave the device unattended while in use.
• The device is not suitable for outdoor use.
• The device is only intended for household use.
• The voltage of the outlet you are using should match the voltage indicated on the nameplate of your device.
• Do not use the device if the power cord or plug is damaged, is malfunctioning, or has been dropped or damaged in any other way. Contact customer service for any inspections, repairs, or electrical or mechanical adjustments to the device.
• If the power cord is damaged, it must be replaced by the manufacturer, customer service, or a qualified electrician to prevent property damage and/or personal injury.

DEVICE OVERVIEW

COMMISSIONING AND OPERATION

Before first use

1. Take the coffee grinder out of the packaging and remove all packaging material.
2. Remove any dust that has settled on the device during the packaging process.
3. Remove the bean funnel. To do this, first press the unlocking button on the bean funnel while turning the funnel counter-clockwise so that you can remove it from the bean funnel holder for cleaning.
4. Clean the bean funnel, bean funnel cover, coffee powder container, and coffee container cover with water, and then dry them carefully.

Caution: Never fill the bean container with water when it is connected to the device base and never clean the device base under running water.

Commissioning

1. Place the coffee grinder on a flat surface.

2. Place the bean funnel in the bean funnel holder. Make sure that the closure of the bean funnel is at the same height as the notch on the bean funnel holder. Now turn the bean funnel clockwise until it is firmly connected to the holder (see Fig. 1). To disassemble, press the release button on the bean funnel while turning the funnel counter-clockwise to remove it from the bean funnel holder.
   The bean funnel is equipped with a microswitch which ensures that the device only works when the bean funnel has been correctly inserted into the bean funnel holder.

3. Make sure that you put a maximum of 360g of coffee beans in the bean funnel.
   Note: If the device is switched on without coffee beans, it will switch off automatically after an operating time of 5 minutes. The device must cool down for at least 30 minutes if it was previously in continuous operation for 5 minutes.

4. Close the bean funnel cover.

5. Place the coffee powder container (with lid) on the holder of the coffee powder container. Make sure that the opening of the coffee powder container is level with the coffee powder outlet.

6. Set the desired grinding degree on the grinder regulator. Turn the control to the right to increase the grinding degree. If you turn the control to the left, the grind will be reduced.

7. The amount of coffee depends on the grinding time. You can use the click wheel to set the desired grinding time (see table). After the selection, the corresponding indicator light will light up with 100% brightness. If you do not want to set a grinding time, the device will automatically grind for the preset grinding time.
   Indicator lights (from left to right)| Grinding time in seconds
   ---|---
   The first LED lights up (S) with 100% brightness (factory setting)| 5
   The second LED lights up (S) with 100% brightness (factory setting)| 10
   The third LED lights up (S) with 100% brightness (factory setting)| 20
   The fourth LED lights up (S) with 100% brightness (factory setting)| 30
   The fifth LED lights up (S) with 100% brightness (factory setting)| 40
   The sixth LED lights up (S) with 100% brightness (factory setting)| 50

8. Plug the power plug of the device into the main socket. The first indicator light (factory setting) will light up with 100% brightness, while the other light indicators and the start/stop indicator will light up with 50% brightness. Select the desired grinding degree according to ‘Step 6’. Then press the start/stop button and the machine will grind the coffee beans for the preset time. After a while, the coffee powder will come out of the coffee powder outlet. The start/stop indicator will flash continuously during the grinding process.
   Notes:
   • If no action is performed 90 seconds after switching on the device, the device will automatically go into standby mode.
   • If the device has been used continuously for 5 minutes, it must be allowed to cool for at least 30 minutes. It is recommended that the device be used continuously for less than 90 seconds per grind. A rest period of 90 minutes should be observed after each grinding cycle.
   • You can interrupt the grinding process at any time by pressing the start/stop button.

9. When the set grinding time is reached, the coffee grinder automatically stops the grinding process and switches to standby mode. Now the first LED will light up again with 100% while all other lights, including the start/stop display, will light up with 50% brightness.
   Note: The maximum filling quantity of the coffee powder container is 155g Make sure that the coffee powder container does not overflow.

10. Unplug the machine, remove the ground coffee container and take out the ground coffee.

CORRECT GRINDING OF COFFEE BEANS

1. The coarse-grained coffee powder is generally used for percolators and coffee machines. Medium grind coffee is used for filter coffee machines and for steam espresso machines. Fine coffee powder is used for espresso machines with an electric pump.
2. For the freshest, tastiest coffee, just grind enough coffee for the cup you’re making. Coffee beans can stay in an airtight container in the freezer for up to 2 months and can be ground while frozen. Coffee powder residues left in the coffee grinder can become stale and can negatively affect the taste of freshly ground coffee. Therefore, always make sure that you clean the grinding chamber, the cutting blades, and the grinder after each use.
3. This coffee grinder is only suitable for grinding dry, brittle foodstuffs. It cannot be used to grind moist, extremely hard, or gummy foods such as ginger, sesame seeds, chocolate, or oil-containing spices such as cinnamon, cloves, or nutmegs. Don’t grind peanuts or grains like wheat, rice, barley, or dried wheat. Attempting to grind this type of food can damage the device. Never attempt to grind ice cubes with the coffee grinder.
4. Freshly ground peppercorns have a strong aroma and can then affect the taste of the coffee beans. You may want to purchase an additional grinder for grinding peppercorns.

CLEANING AND CARE

Unplug the device from the socket and let it cool down completely before cleaning it. To avoid electric shock, do not hold the cord, plug, or body of the machine underwater or fill the bean container with water while it is connected to the machine body.

1. Remove the bean funnel from the bean funnel holder. Clean the bean funnel, bean funnel cover, coffee powder container, and coffee container cover with water, and then dry them carefully.

2. Hold the grinder by the handle and turn it counter-clockwise to remove it. After you have taken the grinder out of the device, remove the coffee powder from the grinder and from the cutting blades. Pour out the rest of the coffee powder (see Figure 2). To put the grinder back into position, put it back into the machine. Make sure that the notch on the lower side of the grinder is level with the lock. Turn the grinder clockwise until it is fixed in the correct position again (see ‘Device overview’).
   Note: Please handle the grinder carefully as the grinder and cutting blade is very sharp.

3. Wipe the body of the device with a wet cloth and then dry it completely.

4. Store the device in a dry and cool environment when you are not using the device.

DISPOSAL INSTRUCTIONS

If there is a legal regulation in your country regarding the disposal of electrical and electronic equipment, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of this product in accordance with the regulations, you protect the environment and the health of those around you from negative consequences. For information on the recycling and disposal of this product, contact your local government or household waste disposal service.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>