KLARSTEIN 10032809 Wonderwall 72 Infrared Heater Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

TECHNICAL DATA
PRODUCT DATA SHEET
SAFETY INSTRUCTIONS
WALL MOUNTING INSTRUCTIONS
OVERVIEW AND CONTROL PANEL
DISPLAY SCREEN
TROUBLESHOOTING
CLEANING AND CARE
DISPOSAL CONSIDERATIONS
- MANUFACTURER & IMPORTER (UK)
References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

www.klarstein.com
WONDERWALL 72
Infrared Heater
10032809

Note: This product is only suitable for well-insulated spaces or occasional use.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10032809

TECHNICAL DATA

Item number	Power supply	Power	Dimensions
10032809	220-240 V
50/60 Hz	720 W	60 x 120 cm

PRODUCT DATA SHEET

Model identifier(s):	10032003
Item	Symbol
Heat output

heaters only
Nominal heat output| | 2.2| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| | 0| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| | 2.2| kW| | electronic heat charge control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output (fan motor)| | N/A| kW| | Type of heat output/room temperature control
At minimum heat output (fan motor)| | N/A| kW| | single-stage heat output and no room temperature control| no
In standby mode| | 0.001| kW| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| yes
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| no
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, WallstraBe 16, 10179, Berlin, Germany

SAFETY INSTRUCTIONS

Do not use the appliance until it is securely fixed as described in this manual.
Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
If the supply cord is damaged, it must be replaced by a qualified engineer in order to avoid a hazard.
The fireplace heater must not be positioned directly under the power socket.
Keep furniture, curtains, and other flammable material at least 1 meter away from the appliance.
Do not leave the appliance unattended during use.
Do not leave the appliance unattended whilst connected to the main supply.
Keep out of reach of children and do not allow them to operate this appliance.
This appliance is intended for household use only and should not be used for industrial purposes.
Do not operate this appliance after a malfunction or after being damaged in any way.
Repairs to electrical appliances should only be performed by a qualified electrician.
Improper repairs may place users at serious risk.
Do not run the mains cable under carpets, rugs, etc.
Do not allow the main cable to hang over sharp edges or come in contact with hot surfaces.
In order to avoid overheating, do not cover the heater.
Do not use this heater with a programmer, timer, separate remote control system, or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Never immerse the product in water or any other liquid for any reason.
Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.
Do not use the appliance outdoors.
Do not use it if you have wet hands.
Never use the appliance on or near hot surfaces.
Do not operate with a damaged cord.
Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
Do not clean the appliance with abrasive chemicals.
Never use accessories that are not recommended or supplied by the manufacturer.
It could cause danger to the user or damage to the appliance.
This appliance is not intended for use by persons (including children) with reduced
Physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

CAUTION
Risk of burns! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

WALL MOUNTING INSTRUCTIONS

Mark the positions of the four holes to be drilled on the wall, and Drill the holes with
the drill bit. Make sure the distance between each hole is the same as the round holes on
the brackets at back of the heater.| Insert the plastic rails fitting into the holes.
KLARSTEIN 10032809 Wonderwall 72 Infrared Heater - FIG
2
Insert the metal screws into the plastic rails.| Lift the heater and aim the four-round holes
on the brackets at the back of the
heater to the 4 screws on the wall.

Slide the screw from Position A to Position B by moving the heater slightly. Make sure the distance between the bottom of the heater and the floor is no less than 20 cm when the heater is installed.| Install the control panel holder onto the wall
beside the heater.
Insert the control panel into the holder.

OVERVIEW AND CONTROL PANEL

KLARSTEIN 10032809 Wonderwall 72 Infrared Heater - FIG
5

DISPLAY SCREEN

KLARSTEIN 10032809 Wonderwall 72 Infrared Heater - FIG
6 OPERATION

Check the heater to be sure it is not damaged.
Then, plug in it and then switch on the main illuminated ON/OFF switch on the side of the heater.

There is two way to use the heater:

(1) Power ON/OFF

Press the on/off button on the control panel, and then the heater will start to work until your room temperature reached the set temperature. If need to power off the heater, Press the on/off button again.

(2) Week timer Mode

Start the heater with the week timer option: Press the Set button, and then press the ON/ OFF straightway.

How to set the Week timer

Press the Timer button when the heater is powered off (make sure the main illuminated switch is on).
After step 1, the WEEK symbol in the LCD display will start to flash, you can choose the day you want to set the timer by pressing the[+] or [-] button. Press SET again.
The grouping symbol in the display will start to flash, press [+] or [-] to choose the group you want to set. You can totally set 4 groups per day from P1 to P4. Press SET
again to start to set the time of power on for the selected group.
• The symbol of ON will be lightened on the display after that, and the [–] symbol for hour start to flash. Press [+] or [-] to choose the hour that you want to let the heater power on. Press SET again and the [–] symbol for a minute will start to flash.
• Press [+] or [-] to choose the minute. Press the SET button again to set the time you want to let the heater power off. The symbol of OFF will be lightened in the display after that, and the [–] symbol for hour start to flash
• Press [+] or [-] to choose the hour that you want to let the heater power off. Press SET again and the [–] symbol for a minute will start to flash.
• Press [+] or [-] to choose the minute. After this, the first-timer group is set successfully.
• Press SET again, the WEEK symbol will start to flash, and you can set another group of timers for the same day you set as above or choose another day to set the timer. The way of operation is the same as explained above.
After the operation of step 3, you can press the TIME button or leave it without any operation for more than 10 seconds to finish the week timer setting.

How to set the system time

Press the TIME button when the heater is powered on, and the [–] symbol for an hour will start to flash. Press [+] or [-] to set the right hour. Press the SET button and the [–] symbol for a minute to start to flash. Use [+] or [-] to set the right minute. Press the SET button and the WEEK symbol will start to flash. Press [+] or [-] to set the right week. Press SET again to quite the system time setting.

How to set the temperature

Press the TEMP button to start the setting, and press [+] or [-] to choose the temperature you need. Press SET to finish the setting.

Open window Detective

This heater has an open window detective function, which is when the heater is powered on (no matter normal mode or week timer mode), it will automatically power off if the detected temperature drops 5℃°C ( or more) in 5 minutes.

TROUBLESHOOTING

If your heater fails to operate, please follow these instructions:

Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
If the ON/OFF switch is not illuminated at the ON position, send it to a service center for reparation directly.

Note: If you experience a problem with your heater, please see the warranty information for instructions. Please do not attempt to open or repair the heater yourself. Doing so may void the warranty and could cause damage or personal injury. If the problem still persists, please contact the distributor.

CLEANING AND CARE

Before cleaning your heater, switch off the heater and allow it to cool. Disconnect the electricity supply to the appliance. The outside can be cleaned by wiping it over with a soft damp cloth and then dried. Do not use abrasive cleaning powders or furniture polish, as this can damage the surface finish. To release the heater from the wall, for cleaning or redecoration, just open the screw bolt cap and unscrew the bolts to take it off the wall.

For short-term storage, just plug off the heater and leave it away; for long- term storage, you can dismantle it from the wall or cover it with some material.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.