EQUATOR EHC 23422 Built In Electric Hybrid Cooktop Owner’s Manual
- May 15, 2024
- EQUATOR
Table of Contents
- EQUATOR EHC 23422 Built In Electric Hybrid Cooktop
- Product Usage Instructions
- Warranty
- Installation
- Ventilation and safety distances
- Cooktop Features
- Compatible Cookware
- Operating the Cooktop
- Maintenance
- Troubleshooting
- Specifications Table
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EQUATOR EHC 23422 Built In Electric Hybrid Cooktop
Specifications
- Model: EHC 23422
- Hybrid Induction-Ceramic Cooktop
- 24″ Built-In
- 2 Induction + 2 Ceramic Burners
- Dimensions:
- Width (W): 23 inches
- Depth (D): 20.5 inches
- Height (H): 3.1 inches
Product Usage Instructions
Safety
Ensure proper installation following the cutout dimensions and ventilation
requirements as indicated in the manual to prevent overheating and ensure safe
operation.
Installation
Follow the provided cutout dimensions on the countertop. Ensure adequate
ventilation and heat-resistant work surface. Maintain specified safety
distances around the appliance.
Electrical Connections
Follow local codes for electrical connections. Use a 4-wire cable from the
home power supply if required.
Cooktop Features
- Hybrid Induction-Ceramic
- 10 Power Levels for precision cooking
- Pause II function for interrupted cooking
- Keep Warm POWER function
- Easy to clean glass surface
Operating the Cooktop
- Ensure the cooktop is plugged into an electrical outlet.
- Place suitable cookware onto the cooktop.
- Select the desired burner (Induction or Ceramic) and adjust the power level using the slider control.
- Utilize additional functions like Power Boost, Keep Warm, and Pause for enhanced cooking experience.
FAQ
Q: What type of cookware can be used on the cooktop?
A: Ceramic Burner – Use any cookware for electric cooking. Induction Burner
– Use only induction cookware or induction-compatible cookware. Follow all
cookware manufacturers recommendations for best results.
Electric Hybrid Cooktop
24” Built-In
2 Induction + 2 Ceramic
Model: EHC 23422
OWNER’S MANUAL
Please read the instructions carefully and keep for future reference.
Information may be updated from time to time so please refer to the manual
online for the latest version of the manual.
Warranty
Equator Appliances undertakes to the consumer-owner to repair or, at our option, to replace any part of this product which proves to be defective in workmanship or materials under normal personal, family or household use, in the USA and Canada, for a period of one year from the date of original purchase. For commercial use, the product is warranted for a period of 90 days. During this period, we will provide all labor and parts necessary to correct such defect, free of charge, if the appliance has been installed and operated in accordance with the written instructions with the appliance. Ready access to the appliance, for service, is the responsibility of the consumer- owner. Service would be provided from Monday to Friday between normal business hours.
Exclusions
In no event shall Equator Appliances be liable for incidental or consequential
damages or for damages resulting from external causes such as abuse, misuse,
incorrect voltage or acts of God. This warranty does not cover service calls
which do not involve defective workmanship or materials covered by this
warranty. Accordingly, diagnosis and repair costs for a service call which
does not involve defective workmanship or materials will be the responsibility
of the consumer-owner.
Specifically, the following work is not covered under warranty and does not constitute warranty work
Installation – e.g. Insufficient spacing around appliance
Maintenance – e.g. Cleaning appliance using solvents
Mishandling – e.g. Breakage of glass
Most work is covered. The defining factor is, has the machine malfunctioned (Equator Appliances is responsible) or has the customer omitted or done something to cause the machine to malfunction (customer is responsible). Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.
WARRANTY SERVICE
This warranty is given by: For Service: Equator Appliances 10222 Georgibelle
Drive, Suite 200 Call 1-800-776-3538
Email: Service@ApplianceDesk.com Houston,
TX 77043-5249 Web: www.ApplianceDesk.com
Website: EquatorAppliances.com Business hours:
9:00 am-5:00 pm weekdays You can register your Warranty by either of the
following methods:
- Scan the QR Code 2. Online at: ApplianceDesk.com/Warranty
GENERAL
Since it is the responsibility of the consumer-owner to establish the warranty period by verifying the original purchase date, Conserv Appliances recommends that a receipt, delivery slip or some other appropriate payment record be kept for that purpose. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. All rights reserved. Manual subject to change without notice.
Congratulations on your new Hybrid Induction-Ceramic Cooktop!
In addition to its contemporary design, this is a highly sophisticated
engineered product that will give you many years of satisfaction.
Here are some of the best reasons for buying your appliance for the ultimate
cooking experience:
- Optional use of Induction or Ceramic burners to allow use of any cookware
- Power Levels for precision cooking
- Easy slider control
- Power Boost function for quick high heat
- Keep Warm function
- Pause function for interrupted cooking
- Lock function for safety
- Easy to clean glass surface
Safety
This appliance is manufactured in compliance with the relevant safety standards. Read all instructions carefully before installation and operation of the appliance. Failure to follon these warnides could result in a fire or explosion that causes property damage, personal injury or death.
WARNING
- Do not operate the cooktop with a damaged cord or if it malfunctions or has been damaged in any manner.
- To protect against electric shock, do not immerse cord, or main body in water or any other liquid.
- Do not let cord hang over edge of table or counter.
- Do not allow cord to touch a hot surface.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect turn any control to off, then remove plug from wall outlet.
- For induction burners use only induction compatible cookware.
- Do not allow pans to boil dry or heat empty pans.
- Never leave the cooktop unattended when in use.
- Close supervision is necessary when the cooktop is used by or near children or impaired persons.
- Even after turning off the cooktop, do not touch it as the surface retains residual heat.
- Do not use the cooktop as a work surface.
- Do not store detergents or flammable materials in the area under the cooktop.
Please dispose off or recycle this appliance in accordance with local environmental regulations.
SAVE THESE INSTRUCTIONS
Installation
Intended Use
- This appliance is designed for built-in household use only.
- Do no use outdoors
- Do not use the appliance to heat a room.
Installing the cooktop
- Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight.
- Follow cutout dimensions of the countertop as indicated on the diagram.
- Ensure the wall coverings, countertop and cabinets around the cooktop can withstand heat (up to 200° F) generated by the cooktop.
- Before cutting out the countertop, check that the dimensions in the diagram correspond to the dimensions of the product.
- Ensure the work surface is heat-resistant and is at least 1.2 inches thick.
- Ensure the safety distance between the sides of the cooktop and the inner surfaces of the countertop is at least 0.12 inches.
- Keep a space of at least 0.2 inches around the cut-out.
- Gently lower the cooktop into the countertop cutout.
NOTE: Do not seal the cooktop to the countertop, the cooktop must be removable if service is necessary.
H (inch)| W (inch)| D (inch)| A (inch)| B (inch)|
X (inch)| F (inch)
---|---|---|---|---|---|---
3.1| 23| 20.5| 22.1| 19.5| min 0.2| min
0.12
Ventilation and safety distances
Ensure that the following conditions are met for adequate ventilation of the cooktop and that the supply and exhaust air is not blocked:
- The safety distance between the cooktop and the cabinet or the vent hood should be at least 30 inches.
- If the cooktop is installed above an oven, the oven must have its own fan.
- The safety distance between the bottom of cooktop and the oven must be at least 2 inches.
- The installation must comply with all space requirements and regulations.
IMPORTANT: To avoid overheating, it is recommended that there is a space of at least half an inch on all four sides between the cooktop and the cabinet where it is installed.
Electrical Connections
The cooktop must connect to a separate, grounded wire, single phase, AC only
electrical supply with its own circuit breaker. These appliances must be
installed in accordance with National Electrical Codes, as well as all state,
municipal and local codes. This appliance must be supplied with the proper
voltage and frequency and amperage, which is protected by a properly sized
circuit breaker or time delay fuse.
If 3-Wire Cable from Home Power Supply
IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection.
If 4-Wire Cable from Home Power Supply
IMPORTANT: Use the 4-wire cable from home power supply where local codes do
not allow grounding through neutral.
Cooktop Features
- Glass Surface
- Left Rear Burner (Induction)
- Left Front Burner (Induction)
- Right Rear Burner (Ceramic)
- Right Front Burner (Ceramic)
- Left Rear Burner Display
- Left Front Burner Display
- Right Rear Burner Display
- Right Front Burner Display
- QR Code
Main Control Panel
- Power
- Child Lock
- Keep Warm
- Power Boost
- Power Levels
- Burner On and Display
- Timer
- Pause
Compatible Cookware
The quality of your cooking is dependent on the cookware you use.
Ceramic Burner – Use any cookware for electric cooking.
Induction Burner – Use only induction cookware or induction compatible
cookware.
NOTE: Follow all cookware manufacturers’ recommendations when using any type of cookware on the cooktop.
Since Induction cooking requires a magnetic vessel for heating, only certain
materials can be used on your cooktop.
Induction requires pots and pans that are made of ferrous(meaning magnetic)
materials.
Check your cookware’s retail box for the induction symbol. To determine if
your cookware is compatible with the induction technology, use a magnet and
see if it holds to the bottom of the cookware. If your magnet stays on, then
your cookware can be used on the induction cooktop!
Optimally the cookware will have this induction image on the retail box:
For Induction The following are not compatible: heat resist glass, ceramic, copper, aluminum pan / pots, round-bottomed cookware, or cookware with a base less than 5 inches.
Operating the Cooktop
Ensure the cooktop is plugged into an electrical outlet. Place suitable cookware onto the cooktop.
-
Main Power
Press the Power icon for three seconds. This powers on the whole cooktop.
You will hear a beep and see flashing lines – on the display next to all the burners. -
Burners
To select the burner to use and the power level, press the burner icon for the desired burner. You can change the power levels by sliding your finger across the slider or by pressing
a number. -
Residual Heat Indicator
When the cooktop has been operating for some time, there will be some residual heat which is indicated on the display as “H” . -
Timer
Press the Timer icon to activate the timer. Each time the timer icon is pressed, an indicator light around the icon illuminates, which indicates the position of the different burners. Once the burner is selected, press the numbers on the control panel to set the number of minutes to set the cooking time. The time will show on the digital display and the numbers will count down on it as the time progresses. If more than one burner is selected, the time on the display will be that of the least number of minutes.
To cancel the timer, press the timer icon to select the burner to cancel. Then press the number “0” two times on the control panel. Or press the timer icon for 3 seconds and all times for all the burners will be cancelled.
Note : Each burner on the cooktop is equipped with a safety temperature
sensor which switches off the cooktop if there is excessive heat. This is to
protect the electronics from overheating. Wait for the cooktop to cool down
before using it again. If any cracks appear on the surface of the cooktop,
immediately disconnect it from the power.
If a cooktop is left on accidentally, it will automatically be switched off
after a period of time has elapsed.
Child Lock
To ensure the safety of children, the cooktop controls can be locked so
children cannot change the settings.
To lock: hold the Child Lock icon for 3 seconds until “L0” displays and the
rest of the icons are disabled except the On/Off Power icon. To unlock: hold
down the Child Lock icon for
3 seconds and the cooktop will return to normal.
Keep Warm
Press the Keep Warm icon to allow the burner to be on at a low temperature and
to keep the food warm. The display will show .
Press the icon again to cancel the Keep Warm feature.
Pause
Press the Pause icon to stop heat to the burner. Then press the icon again to
resume cooking. The Pause feature remains active for 2 hours and then the
burner automatically turns off.
QR Code
Scan on your cell phone to register Warranty, obtain Specifications and Owner’s
Manual.
Maintenance
- Wait for the cooktop to cool down completely before cleaning it.
- Do not use chemicals and abrasive materials to clean the cooktop.
- Never wash the cooktop with water.
- Use mild detergent and a damp cloth to wipe down the cooktop.
- Periodically, use a vacuum cleaner to remove dust from intake and exhaust vents.
- If plastics or sugars melt onto the cooktop, gently and carefully scrape the debris off while the burner is still hot.
Troubleshooting
In most cases, when your Cooktop fails to work, the problems arising can be easily solved without having to call for a technician. Before calling for assistance, always check these points. Repairs should only be done by an authorized service agent.
Problem | Possible Cause | Solution |
---|---|---|
Burner does not maintain a rolling boil or cooking is slow | Improper cookware | |
being used. | Use pans that are flat and match the diameter of the burner. | |
Burners do not work properly | Cooktop controls improperly set. | Check to be |
sure the correct control is set for the burner you are using.
Scratches on cooktop glass surface
| Incorrect cleaning materials being used.| Use mild cleaning solution and
soft damp cloth.
Cookware with rough bottoms being used or coarse particles (salt or spices)
are on the surface of the cooktop. Cookware has been dragged across the
cooktop surface.| To avoid scratches, use the recommended cleaning procedures.
Make sure bottoms of cookware are clean before use, and use cookware with
smooth bottoms.
Don’t drag cookware over the cooktop.
Areas of discoloration on the cooktop| Food spillovers not cleaned before next
use.| Cleaning the cooktop after each use.
Plastic melted to the surface| Plastic placed on the hot cooktop.| Gently
scrape off plastic.
Control panel not operating| Control panel is dirty.| Clean the control panel.
A fuse may be blown or the circuit breaker tripped.| Replace the fuse or reset
the circuit breaker.
Error Codes
Information codes may be displayed to help you understand better what is wrong
with the appliance.
Error Codes | Possible Cause | Solution |
---|---|---|
E0 | No pan or incorrect pan on burner. | Place correct pan on burner and ensure |
that if it is an induction burner there is liquid or some substance in the
pan.
E2| NTC short or not connected.| Call for Customer Service.
E3| High voltage: Higher than 260-275V.| Ensure voltage is below this range.
E4| Low voltage: Lower than 145-160V.| Ensure voltage is above this range.
Specifications Table
Model | EHC 23422 |
---|---|
Electrical | 240V / 60Hz / 30A |
Number of Burners | 4 |
Type of Burners | 2 Induction and 2 Ceramic |
Total Power / Levels | 7100W / 9 |
Left Rear Burner | 1200W Booster 2000W |
Left Front Burner | 2100W Booster 2700W |
Right Rear Burner | 1800W |
Right Front Burner | 1200W |
Net Weight | 9.6 lbs |
Product Dimensions HxWxD (inch) | 2.2 x 23 x 20.5 |
California Proposition 65
WARNING: This product contains chemical known to the State of California
to cause cancer and birth defects or other reproductive harm.
Equator Advanced Appliances USA, founded in 1991, offers Effcient, High- Quality, and Innovative household appliances.
Our Mission is to simplify domestic chores and save Time, Space, and Energy.
Our Vision is to enhance our Customer’s Quality of Life!
Equator Appliances USA www.EquatorAppliances.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>