BLAUPUNKT FTM501 Meat Thermometer Owner’s Manual
- June 5, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT FTM501 Meat Thermometer
IMPORTANT NOTES
- Before operating the appliance, please read the instruction manual and follow the instructions provided. The manufacturer is not liable for any damages resulting from use of the appliance contrary to its intended use or inappropriate use. Keep the instruction manual for future reference.
- The appliance is intended for home use only. Do not use for other purposes contrary to its intended use. Do not use for medical or commercial purposes.
- This appliance may be used by children of at least 8 years of age and by persons with reduced physical, mental abilities and persons with no experience or knowledge of the equipment, if supervised or instructed on its safe use so that the risks associated with it were understandable. Children should not play with the appliance nor clean or carry out maintenance of the appliance unattended.
- The scale is a precision device. Do not drop, hit or shake it.
- If the scale is not used for a long time, remove the batteries. Batteries that are flat or out of use for a long time may leak.
DISPOSAL
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.
Device is compliant with EU directives: – Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
Remove the batteries ifthe device will not be used for a longer time.
Batteries that are flat or have been out of use for a long time may leak.
Do not immerse the device in water.
Do not immerse the probe cable in water. Only a steel probe can be washed.
Wash the steel probe after each use.
Do not let the probe cable come into contact with open flames or touch very
hot parts (above 25o•c J.
Do not place the device in an oven or places with increased temperature.
Turn off the device when not in use for a longer battery life.
- Display
- M/M button
- S/T button
- S/S/ Alert button
- Meat type selection
- Doneness degree selection
- Alert temperature
- Measured temperature
- Timertime
- Probe connect port
- Power on/off switch
- Mode selector switch
- Battery compartment
- Probe with cable
Using the meat thermometer function
1. Connect the probe to the device.
2. Activate the device using the switch.
2. Probe connect port
3. Power on/off switch
4. Mode selector switch
5. Battery compartment
6. Probe with cable
3. Set the mode selector switch to the”COOK”position.
4. Select the type of meat with the M/M button by pressing it repeatedly.
5. Select the doneness by pressing the SIT button repeatedly.
6. Press the SIS/Alert button to change the temperature unit.
7. To set your required Alert temperature, press and hold the SIS/Alert
button for 3 seconds. When the temperature indication flashes, set it with the
M/M (increase) and SIT (decrease) buttons.
8. Insert the probe in the meat. An alert will sound when the desired
temperature is reached.
Using the timer function
1. Activate the device using the switch.
2. Set the mode selector switch to the”TIMER”position.
3. The device can operate as a timer or a stopwatch.
4. Press the SIS/Alert button to activate the stopwatch (time count) when the
display shows 00:00.
To stop the stopwatch, press the button again.
5. To reset the stopwatch, press two buttons M/M and SIT simultaneously.
6. To set the timer time, use the M/M button to set minutes and the SIT
button to set seconds. Press the SIS/Alert button to start the countdown.
Replacing the batteries:
1. Open the battery compartment cover.
2. Remove old batteries. Insert new batteries observing correct polarity.
3. Snap the battery cover back in place.
Manufacturer / Producent
Blaupunkt Competence Center
2N-Everpol Sp. z o.o.
ul. Puławska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: [email protected]
www.blaupunkt.com