Shenzhen Doageas Technology BT01 Bluetooth Speaker User Guide

Shenzhen Doageas Technology BT01 Bluetooth Speaker User Guide

Specifications

• Bluetooth name of Speaker : BT01
• Bluetooth name of Earbuds : E5
• Input power : 5V 500mA
• Working current: 100mA
• Bluetooth version: V5.1
• Effective distance : 10 meters
• Working frequency:  2.402GHz~2.480GHz
• Signal to noise ratio : > 85dB
• Speaker specifications : 4Ω 2W
• Rechargeable battery specification : 3.7V 300mAH
• Headphone battery specification : 3.7V 30mAH
• Key type : toggle
• Quiescent current : 5UA
• Audio range : 20~20Khz
• Music playing   time : 2-3 hours
• Low   voltage reminder:  Yes

What’s Included

• Wireless speaker x 1
• Wireless Earbuds x 1 Pair
• Type-C Charging Cable x 1
• Instruction Sheet x 1

QUICK START GUIDE

MUST READ BEFORE USE

Please remove plastic isolation stickers from both earbuds before first use.

Touch buttons only work on the touch control area. Do not press too hard on touch buttons to avoid damaging the buttons.
Touch Gently. Device should respond within a second.

Function category

| Function name|

Operating

---|---|---
Basic functions| Power on| Be automatically turn on when take it out of charging box or long press the touch button for 3 seconds
Power off| Be automatically turn off when put into charging box or long press the touch button for 3 seconds
Phone connecting| The earbuds can be searched after turning on, no need to operate to enter the pairing mode
Telephone functions| Answer call| Short press the MFB button
Hang up call| Short press the MFB button
Refuse call| Long press the left or right MFB button for 2 seconds
Media functions| Music pause| When the music is playing, press left or right MFB button once
Keep playing music| Press left or right MFB button once
Next track| Double click right MFB button
Up track| Double click left MFB button
Automatic functions| Earbuds pairing| After the two earbuds are turned on, they automatically adapt to pairing with each other. No action required.
Restore connection| When the headset is turned on, the last connected device is selected first, and it will automatically open after no connection and can be searched and reconnected
Reconnect after dropped| After being dropped out of range, return to range within 3 minutes, and the connection can be automatically restored
Other functions| Earbud power display| After connecting the mobile phone, you can see the power display of the left earphone on the mobile phone (some mobile phones need to slide down the menu bar to see it)
Low battery reminder| When beeps regularly appear during use, it means the battery is too low and needs to be charged
Automatic charging| When the earbuds is placed in the charging case, it will automatically recharge, and automatically sleep when fully charged
Earbud indicator light description| Red and blue flash alternately slowly| The earbuds is powered on but not paired successfully
Earbuds blue light flashes for 1 second| Earbuds have been paired successfully but not connected to mobile phones and other devices
Earbuds blue light flashes slowly for 5 seconds| Successfully connected to mobile phones and other devices
Red light is always on| The earbud’s battery is not full and is in charging (only appears during charging)

CHARGING

Charge Speaker

• Plug the provided Type-C charging cable into charging plug and the USB part into a USB wall charger to start charging the speaker
• Speaker Indicator Lights flashing in Green when charging
• Speaker Indicator Lights turn solid green when fully charged
• Charging Time: Approximately 1-2 hrs

Charge Earbuds

• Place earbuds inside the charging cradle to start charging
• Earbud Indicator light turns solid red when charging
• Earbud Indicator light turns off when fully charged
• Charging Time: Approximately 60 minutes
• When the speaker is fully charged, it can recharge the earbuds 4-5 times.

PAIRING

Speaker

• Switch the power switch to “On’:
• Turn on the Bluetooth function on your device to search for ” BT01″ and connect to it. When it is connected, you should hear a prompt sound.

Earbuds

• Remove the earbuds from the charging cradle. Both earbuds will turn on and pair to each other automatically.
• If the earbuds are not turned on automatically, please touch the touch button and hold for 3 seconds until you hear the prompt “Power On’: -Turn on the Bluetooth function on your device to search for ” E5″and connect to it. When it is connected, you should hear the prompt “Connected’:

TOUCH BUTTON

Touch control on Earbuds

• Power on/off : Touch and hold for 3 seconds until you hear the prompt “Power On”/”Power Off’:
• Play/ Pause/ Answer Incoming Call/ Hang Up Call :Touch left/ right earbud 1 time
• Refuse Call :Touch either left or right earbud and hold for 2 seconds
• Next Song : Touch 2 times on right earbud
• Previous Song :Touch 2 times on left earbud
• When you hear earbuds beeping regulary that means the battery is low and you need to place them in the charging cradle to recharge.
• When earbuds is stored inside the charging crandle, earbuds will turn off and start charging automatically.

WARNING

• Do not use the product in high temperature; Always keep your product away from fire. For your safety, never throw the product into fire, which may cause explosion and personal injury.
• Do not use the product near high-voltage wire or electronic apparatus. Please take proper safety measures when using the product in terrible weather conditions.
• Do not use the product near water or any high-humidity environment, which may damage the product.
• The product is not designed for use in or near any strong magnetic field, which may damage the product.
• The device may not work properly due to wrong operation or low power. You can power on again or charge the device.
• If the devices are not paired, they will go into sleep mode after couple minutes. Power on the speaker/earbuds to use again. Earbuds FCC ID: 2A02W-E5

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

• Reorient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>