DOAGEAS B1 Bluetooth Speaker Instruction Manual
- June 15, 2024
- DOAGEAS
Table of Contents
Bluetooth speaker
B1
product description
This speaker transmits audio signals through Bluetooth wireless transmission
technology, using the latest Bluetooth communication standard Bluetooth 5.0
line design, can be compatible with the low version of the Bluetooth
communication standard, and the performance of all aspects has been improved.
It integrates Bluetooth speaker and small colored lights, which not only
supports Bluetooth / TWS / TF playback mode, but also supports voice calls.
Small and portable, let you enjoy good life!
technical parameters
- Product model number: B1
- Speaker battery: 1200mah
- Key type: key
- Charging method: Type-C
- Speaker horn specification: 4Ω / 5W internal magnetic
- Charging time: 2 hours
- Speaker working time: 3 hours
- Standby time: greater than 600H
- Input voltage: DC 5V
- Charging current: 800mA
- Bluetooth protocol: A2DP/HFP/HSP/AVRCP
- Bluetooth version: 5.0
- Effective distance: 10 m
Product analysis
operation declaration
| order number | item | Speaker operation method |
|---|---|---|
| 1 | starting up | Long press the switch key for 2 seconds, short press Play |
pause, double-click TWS
2| shut down| Long press the switch key for 2 seconds to shut down
3| Connect Bluetooth| Turn on the mobile phone’s Bluetooth function, and
search for it Bluetooth, connect Bluetooth name BT Speaker without password
4| Volume + / call for the next song| Short press the + key, the volume
increases, long Press the + key, and the next song
5| Volume – / of the last song| Short press-key, volume reduced, long Press
the-key, the last song
6| Mode switching| Short press mode switch, long press light 7 Switch: Double-
click the light on / off
7| Support TF playback|
8| Support call|
LED indicator status| starting up| Dazzle light
In the speaker charging| Red light rotation
The speaker is charged| The green light goes off for 5 minutes
Safety Instructions
In order to prevent some dangerous situations during usage, please read the safety instructions before usage.
- Please do not place the product near heating equipment such as heaters, microwave ovens, rice cookers, high voltage cookers, to prevent the product from overheating and causing a fire.
- Please do not drop or hit the product to avoid a explosion.
- When used by children, please ensure normal operation under adult supervision.
- Do not use in low temperature and humid environment, please use under the environment of 0-45℃.
- Do not disassemble or repair the product without authorization.
- Do not place the product within 20cm from the medical equipment to prevent Device interference occurs.
- When not in use, please unplug the product charger from the socket, to avoid draining battery life or causing damage.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID：2AQ2W-B1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>