DOAGEAS BT02 True Wireless Earbuds with Bluetooth Speaker 2 In 1 User Manual
- June 3, 2024
- DOAGEAS
Table of Contents
DOAGEAS BT02 True Wireless Earbuds with Bluetooth Speaker 2 In 1
Product Description
This product is a semi-in-ear TWS Bluetooth headset + integrated hanging buckle combination speaker, compact and lightweight ergonomic design, and built-in low-power high-performance Bluetooth 5.3 version chip, and an integrated Bluetooth lanyard speaker charging case. It can adapt to various listening scenarios such as sharing and private. The compact body supports luggage locks, so you can take it with you whether you are climbing or hiking outdoors.
Technical parameters
- Bluetooth name of speaker: BT02
- Bluetooth name of earbuds: E3
- Working current: 100mA
- Bluetooth version: V5.3
- Effective distance: 10 meters
- Key type: Button
- Speaker specifications: 36 external magnetism/2W
- Charging case battery specification: 3.7V 300mAH
- Earbuds battery specification: 3.7V 30mAH
- Audio range: 20Hz－20KHz
- Quiescent current: 5UA
- SNR: ≥85db
- Charging port: Type-C
- Low voltage reminder: Yes
- Recharging current: 5V 200mA
- Speaker playing time: 2-3hours
- Earbuds playing time: 4 hours
- Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4, HFP1.5, GAVDP1.0
Bluetooth earbuds side
Bluetooth speaker side
Tips:
- Put the earbuds back into the charging case before use, and when take out the earbuds again, “L” and “R” earbuds will start pairing automatically. Or press the touch buttons of the “L” and “R” earbuds for 3 seconds, earbuds will automatically pair after power on.
- Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds pairing successfully.
Function description
Brief Introduction of TWS Earbuds Function:
- When the double headsets are taken out of the charging case, they will automatically complete the pairing with a prompt sound.
- Then it can be searched and connected by the mobile phone.
- After the connection is completed, there will be a success tone in both ears.
- At this time, it can be realized through the earbuds touch button:
- Click to pause or play music.
- Double-click on the left ear to the previous song, and double-click on the right ear to the next song.
- Click to answer the call when there is an incoming call, and double-click to end the call when in a call.
- When put the earbuds back into the charging case, automatically sleep and start charging, the charging light turn to red and will turn off after fully charged.
Brief Introduction of speaker function:
Long press the power button 3 seconds, the speaker can be searched for
connection after power on, and it will automatically power off after 5 minutes
without connection.
Functions
Safety Instructions
To prevent dangerous situations during use, please read the safety instructions.
- Please do not place the product near heaters, microwave ovens, rice cookers, pressure cookers and other heating equipment to prevent the product from overeating and causing a fire.
- Please do not drop or hit the product to avoid explosion.
- When used by children, please ensure normal operation under adult supervision.
- Do not use in a low temperature and humid environment, the normal use environment is 0-50℃.
- Do not disassemble or repair the product without authorization.
- Do not place the product within 20cm of medical equipment to prevent equipment interference.
- When not in use, please unplug the product charger from the socket to avoid consuming the battery life or causing damage.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>