Shenzhen Doageas Technology BT12 True Wireless Earbuds with Bluetooth Speaker Instruction Manual
- June 5, 2024
- Shenzhen Doageas Technology
Table of Contents
Shenzhen Doageas Technology BT12 True Wireless Earbuds with Bluetooth
Speaker
Product Description
This product is an half-in ear TWS Bluetooth Earbuds+integrated hanging buckle
combination speaker, with compact and lightweight ergonomic design and built-
in low-power high-performance Bluetooth version 5.1 chip and integrated
Bluetooth hanging buckle speaker charging compartment.
It can adapt to various modes of listening scenes such as sharing and private.
The compact body supports the luggage buckle lock, which can be carried with
you regardless of outdoor climbing or hiking.
Technical parameters
- Bluetooth name of speaker : BT12
- Bluetooth name of earbuds: E2
- Working current: 100mA
- Bluetooth version: V5.1
- Effective distance: 10 meters
- Key type: Button
- Speaker specifications: 36 Internal magnetic/3W
- Rechargeable battery specification: 3.7V 300mAH
- Headsets battery specification: 3.7V 30mAH
- Audio range: 100-20Khz
- Speaker playing time: 3-4 hours Headsets playing time: 24 hours
- Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4, HFP1.5, GAVDP1.0
- Quiescent current: 5UA
- SNR: >=85db
- Charging port: Type-C
- Low voltage reminder: Yes
- Input power: 5V 500mA
Bluetooth speaker side
Bluetooth earbuds side
Tips:
- Put the earphones back into the charging case before use, and when take out the earbuds again, “L” and “R” earbuds will start pairing automatically. Or press the touch buttons of the “L” and “R” earbuds for 3 seconds, earbuds will automatically pair after power on.
- Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds pairing successfully.
Function description
Brief Introduction of TWS Earbuds Function:
- When the binaural earbuds are taken out of the charging case, they will automatically complete the pairing with a prompt sound.
- Then it can be searched and connected by the mobile phone.
- After the connection is completed, there will be a success tone in both ears.
- At this time, it can be realized through the earbuds touch button 4.1 Click to pause or play music.
- 2 Double-click on the left ear to the previous song, and
- uble-click on the right ear to the next song.
- Click to answer the call when there is an incoming call, and click to end the call when in a call.
- When put the earbuds back into the charging case, automatically sleep and start charging, the charging light turn to red and will turn off after fully charged.
- Battery indicator consists of 4 LED lights, each light point represents 25% power.
Brief Introduction of speaker function:
Long press the power button, the speaker can be searched for connection after
power on, and it will automatically power off after 5 minutes without
connection.
Safety Instructions
To prevent dangerous situations during use, please read the safety instructions.
- Please do not place the product near heaters, microwave ovens, rice cookers, pressure cookers and other heating equipment to prevent the product from overeating and causing a fire.
- Please do not drop or hit the product to avoid explosion.
- When used by children, please ensure normal operation under adult supervision.
- Do not use in a low temperature and humid environment, the normal use environment is 0-50℃.
- Do not disassemble or repair the product without authorization.
- not place the product within 20cm of medical equipment to prevent equipment interference.
- When not in use, please unplug the product charger from the socket to avoid consuming the battery life or causing damage.
NOTE:
This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>