iCOM IC-F62D UHF Handheld Digital Transceiver Radio

IMPORTANT:
This instruction sheet includes some functions that are usable only when they are preset by your dealer. The transceiver may have other functions and operations that are not described in this instruction sheet. Ask your dealer for preset function details.
EXPLICIT DEFINITIONS

WORD

|

DEFINITION

---|---

DANGER!

| Personal death, serious injury or an explosion may occur.

WARNING!

| Personal injury, fire hazard or electric shock may occur.

CAUTION

| Equipment damage may occur.

NOTE

| If disregarded, inconvenience only. No risk of personal injury, fire or electric shock.

I-com is not responsible for the destruction, damage to, or performance of any I-com or non-I-com equipment, if the malfunction is because of:

• Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive
• The use of I-com transceivers with any equipment that is not manufactured or approved by I-com.

I-com, I-com Inc. and the I-com logo are registered trademarks of I-com Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. AMBE+2 is a trademark and property of Digital Voice Systems Inc.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by I-com Inc. is under license.
All other products or brands are registered trademarks or trademarks of their respective holders.

PRECAUTIONS **

**

DANGER!

• NEVER short the terminals of the battery pack. Shorting may occur if the terminals touch metal objects such as a key, so be careful when placing the battery packs (or the transceiver) in bags, and so on. Carry them so that shorting cannot occur with metal objects. Shorting may damage not only the battery pack, but also the transceiver.
• NEVER use or charge I-com battery packs with non-I-com transceivers or non-I-com chargers. Only I-com battery packs are tested and approved for use with I-com transceivers or charged with I-com chargers. Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst.
• NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere.
• NEVER operate the transceiver with a headset or other audio accessories at high volume levels. The continuous high volume operation may cause a ringing in your ears. If you experience the ringing, reduce the volume level or discontinue use.
• NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anything less could result in an accident.
• NEVER place the transceiver in an insecure place to avoid inadvertent use by unauthorized persons.

CAUTION:

• DO NOT modify the transceiver. The specifications may change and then the transceiver may not comply with the requirements of required regulations. The transceiver warranty does not cover any problems caused by unauthorized modification.
• DO NOT carry the transceiver by holding the antenna.
• DO NOT operate unless the flexible antenna, battery pack are securely attached to the transceiver. Confirm that the antenna and battery pack are dry before attaching. Exposing the inside of the transceiver to dust or water can cause serious damage to the transceiver.
• DO NOT place or leave the transceiver in direct sunlight or in places with temperatures below –30°C (–22°F) or above +60°C (+140°F). The basic operations of the transceiver are guaranteed within the specified operating temperature range. However, the Liquid Crystal Display may not operate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas.
• DO NOT use harsh solvents such as benzine or alcohol when cleaning. This could damage the equipment surfaces. If the surface becomes dusty or dirty, wipe it clean with a soft, dry cloth.
• DO NOT operate the transceiver if it becomes hot after continuously transmitting for long periods of time. This may damage the transceiver.

BE CAREFUL! The transceiver meets IP67 requirements for dust-tight and waterproof protection. However, once the transceiver has been dropped, dust- tight and waterproof protection cannot be guaranteed because of possible damage to the transceiver’s case or the waterproof seal. Even when the transceiver power is OFF, a slight current still flows in the circuits. Remove the battery pack from the transceiver when not using it for a long time. Otherwise, the installed battery pack will become exhausted, and will need to be recharged or replaced.
MAKE SURE to turn OFF the transceiver power before connecting the supplied or optional equipment.

Battery Caution
Misuse of Li-ion batteries may result in the following hazards: smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degradation of battery performance
DANGER!

• NEVER solder the battery terminals, or NEVER modify the battery pack. This may cause heat generation, and the battery may burst, emit smoke or catch fire.
• NEVER **** place or leave battery packs in areas with temperatures above 60°C (140°F). High temperature buildup in the battery cells, such as could occur near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of time may cause the battery cells to rupture or catch fire. Excessive temperatures may also degrade the battery pack’s performance or shorten the battery cell’s life.
• NEVER strike or otherwise impact the battery pack. Do not use the battery pack if it has been severely impacted or dropped, or if the pack has been subjected to heavy pressure. Battery pack damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire.
• NEVER expose the battery pack to rain, snow, seawater, or any other liquids. Do not charge or use a wet pack. If the pack gets wet, be sure to wipe it dry before using.
• NEVER place or leave battery packs near fire. Fire or heat may cause them to rupture or explode. Dispose of used battery packs in accordance with local regulations.
• NEVER let fluid from inside the battery get in your eyes. This can cause blindness. Rinse your eyes with clean water, without rubbing them, and immediately go to a doctor.
• NEVER put the battery pack in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery cells to rupture.
• NEVER use the battery pack if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor.
• NEVER use deteriorated battery packs. They could cause a fire.
• NEVER Let fluid from inside the battery cells come in contact with your body. If it does, immediately wash with clean water.

CAUTION
DO NOT use the battery pack out of the specified temperature range for the transceiver (–30°C+60°C (–22°F ~ +140°F)) and the battery itself (–20°C +60°C (–4°F ~ +140°F)). Using the battery out of its specified temperature range will reduce its performance and battery cell’s life. Please note that the specified temperature range of the battery may exceed that of the In such cases, the transceiver may not work properly because it is out of its operating temperature range

CAUTION
Shorter battery life could occur if the battery is left fully charged, completely discharged, or in an excessive temperature environment (above 50°C (122°F)) for an extended period of time. If the battery pack must be left unused for a long time, it must be detached from the transceiver after discharging. You may use the battery pack until the remaining capacity is about half, then keep it safely in a cool and dry place at the following temperature range:

• -20°C ~ +50°C (-4°F ~ +122°F) (within a month)
• -20°C ~ +40°C (-4°F ~ +104°F) (within three months)
• -20°C ~ +20°C (-4°F ~ +68°F) (within a year)

BE SURE to replace the battery pack with a new one approximately five years after manufacturing, even if it still holds a charge. The inside battery material will become weak after a period of time, even with little use. The estimated number of times you can charge the battery is between 300 and 500. Even when the battery appears to be fully charged, the operating time of the transceiver may become short when:

• Approximately five years have passed since the battery was manufactured.
• The battery has been repeatedly

Charging caution
DANGER!

• NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun-heated vehicle, or in direct sunlight. In such environments, the safety/protection circuit in the battery will activate, causing the battery to stop charging.
• NEVER charge the transceiver during a lightning storm. It may result in an electric shock, cause a fire or damage the transceiver. Always disconnect the power adapter before a storm.
• NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rupture.
• Occasionally observe the battery pack condition while charging. If any abnormal condition occurs, discontinue using the battery pack.
• NEVER insert the transceiver (battery attached to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof.

CAUTION
NEVER charge the battery outside of the specified temperature range: BC-214 and BC-219N (16˚C 40˚C (60.8˚F ~ 104˚F)). Otherwise, the charging time will be longer, but the battery will not reach a full While charging, at a point after the temperature goes out of the specified range, the charging will automatically stop.

SAFETY TRAINING INFORMATION

Your I-com radio generates RF electromagnetic energy while transmitting. This radio is designed for and classified as for “Occupational Use Only.” This means it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC and IC RF exposure limits for “Occupational Use Only”. In addition, your I-com radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:

• FCC KDB Publication 447498 D03, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1-2019), IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300
• American National Standards Institute (C95.3-2021), IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 300 GHz.
• The antennas, batteries, belt clips, speaker-microphone, and other accessories that are listed in “OPTIONS” on the INSTRUCTIONS sheet, are authorized for use with this Use of accessories other than those specified may result in RF exposure levels exceeding the FCC and IC requirements for wireless RF exposure.
• Health Canada Safety Code 6 – Limits of Human Exposure to Electromagnetic Energy in the Frequency Range from 3 kHz to 300 GHz.

CAUTION

• To ensure that your expose to RF electromagnetic energy is within the FCC and IC allowable limits for occupational use, always adhere to the following guidelines:
• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC and IC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.
• DO NOT transmit for more than 50% of the total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC and IC RF exposure compliance requirements to be exceeded. The radio is transmitting when the LED indicator lights red. You can cause the radio to transmit by pushing the “PTT” switch.
• ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting, and only use the I-com belt-clips listed in “OPTIONS” of the INSTRUCTIONS sheet when attaching the radio to your belt, or other place, to ensure FCC and IC RF exposure compliance requirements are not exceeded.
• The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates within the FCC and IC RF exposure limits of this radio.

Electromagnetic Interference/Compatibility
During transmissions, your I-com radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as a consequence of their employment, provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.|

FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION
Changes or modifications to this transceiver, not expressly approved by I-com Inc., could void your authority to operate this transceiver under FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference

RECOMENDATION
CLEAN THE TRANSCEIVER THOROUGHLY IN A BOWL OF FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the transceiver’s keys, switches, and controllers may become unusable, due to salt crystallization, and/or the charging terminals of the battery pack may corrode.
NOTE: If the transceiver’s waterproof protection appears defective, carefully clean the transceiver with a soft, damp (fresh water) cloth, then dry it before operating. The transceiver may lose its waterproof protection if the case, jack cap, or connector cover is cracked or broken, or the transceiver has been dropped. Contact your I-com distributor or your dealer for advice.

VOICE CODING TECHNOLOGY
The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment.
The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form.
U.S. Patent Nos. #8,595,002, #8,359,197, #8,315,860, #8,200,497, #7,970,606,

6,912,495 B2.

ABOUT CE AND DOC
Hereby, I-com Inc. declares that the versions of IC-F52D and IC-F62D which have the “CE” symbol on the product, comply with the essential requirements of the Radio Equipment Directive, 2014/53/
EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.icomjapan.com/support/
DISPOSAL
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

FREQUENCY RANGE AND OUTPUT POWER

Model

|

Version

|

Frequency Range

|

Output Power

---|---|---|---
VHF Digital Transceiver IC-F52D| –| 136–174 MHz| 5 W
UHF Digital Transceiver IC-F62D| USA-02 USA-05 USA-15| 450–512 MHz| 5 W
EXP-02 EXP-05 EXP-15| 450–520 MHz
EXP-03 EXP-06 EXP-16| 350–400 MHz
Other| 400–470 MHz

• Channel spacing: 6.25 kHz 1 / 12.5 kHz/20 kHz 2 / 25 kHz ***** 3

1 Only Digital mode,
2 Only European versions,
***** 3 Except USA versions

SUPPLIED ACCESSORIES

1. Battery Pack
   

2. Belt Clip
   

3. Connector Cover (With a Screw)

Note:

• Some accessories are not supplied , or the shape is different ,depending on the transceiver Version
• Confirm both battery sliding locks are looked in place ,when attaching the battery to the transceiver. Both sliding locks make a click sound when locked.

PANEL DESCRIPTION

About the status indicator

• Lights white, then blinks red, yellow, and green when turning ON the transceiver.
• Lights red while transmitting.
• Lights green while receiving a signal, or when the squelch is open.

About the Multi-connector
Connects to an optional speaker microphone or headset.
CAUTION:
DO NOT use the transceiver without the connector cover or the optional microphone attached. The transceiver meets IP67 requirements for dust-tight and waterproof protection only when the connector cover or the optional microphone is attached.
About the Software key functions
Your dealers can assign the Software key functions to the keys.

FUNCTION DISPLAY

NOTE:
The screen is an example. The displayed position of each icon may differ, depending on the function being used۔
D Icon Area
Indicators

• SIGNAL STRENGTH INDICATOR
  Displays the relative receive signal strength level.

• BATTERY INDICATOR
  **** Displayed or blinks to indicate the battery status.

Icons
The following icons are displayed in the Icon Area.

SHIFT ICON

• Displayed when the Shift function is ON.
• A user can use a Software key’s secondary function in the Shift mode. Ask your dealer for details.

POWER ICON

Displays the output power level.

• “L1” is displayed when the output power is set to
• “L2” is displayed when the output power is set to
• “H” is displayed when the output power is set to

AUDIBLE ICON
Displayed when the channel is in the ‘audible’ (unmute) mode.

MESSAGE ICON

• Blinks after messages (Message or Status Message) have been received.
• Stops blinking when the screen is changed, or any key is pushed, but is displayed if unread messages are still in the Message memory.
• Disappears when all messages in the Message memory have been

BELL ICON
Displayed when a matching signal is received, depending on the presetting.

SCAN ICON

• Displayed when a scan is
• Blinks while

SCAN TARGET CHANNEL ICON
Displayed when the channel is selected as a scan target channel.
SCRAMBLER/ENCRYPTION ICON
In the Analog mode:

• Displayed when the Voice Scrambler function is ON

In the Digital mode:

• Displayed when the Encryption function is
• Blinks when decoding an encrypted

GPS ICON

• Displayed when valid position data is
• Blinks when searching for satellites or calculating position data.
• HM-233GP is required to use the GPS function.

RECORD ICON

• Displayed when the Record function is
• Blinks while recording

TALK AROUND ICON
Displayed when the Talk Around function is ON.

PHONE ICON

• Displayed when the transceiver is connected to a telephone network on the selected channel.
• Blinks while receiving a phone

BROADCAST CALL ICON
Displayed when the Broadcast call is received.

• For only the dPMR version.

SITE LOCK ICON
Displayed when the Site Lock function is ON.

LONE WORKER ICON
Displayed when the Lone Worker function is ON.

MOTION SENSOR ICON
Displayed when the Motion Sensor function is ON.

NOISE CANCEL ICON
Displayed when the Noise Cancel function is ON.

SURVEILLANCE ICON
Displayed when the Surveillance function is ON.

VIBRATION ICON
Displayed when the Vibration function is ON.

VOX ICON
Displayed when the VOX function is ON.

• VS-5MC,VS-3, or other Bluetooth headset is required to use the VOX function.

Bluetooth ® ICON

• is displayed when Bluetooth is activated.
• is displayed when a Bluetooth device is connected.
• For only the transceiver with the Bluetooth function.

Text Area
Displays the selected Zone number, Channel number, and Channel name, if set.

Key Display Area
Displays the names of the function assigned to [P1] and [P2].
Ask your dealer about the assigned Software key functions

BASIC OPERATION

**Turning ON the transceiver

**

NOTE:
Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. See the BATTERY CHARGING section of this sheet. Rotate [VOL] to turn ON the transceiver.

Receiving and Transmitting

• Receiving:

1. Select a Rotate [Rotary Encoder] or push [Up] or [Down], depending on the presetting
2. When receiving a call, rotate [VOL] to adjust the audio output level to a comfortable listening

• Transmitting:

CAUTION: Attach an antenna before transmitting. Transmitting without an antenna may damage the transceiver.

1. wait until the channel is clear to avoid interferences
2. While holding down [PTT], speak at your normal voice
3. Release [PTT] to receive

IMPORTANT
To maximize the readability of your signal:

1. After pushing [PTT], pause briefly before you start speaking
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at your normal voice

BATTERY CHARGING

NOTE: Before detaching or attaching a battery pack, BE SURE to turn OFF the transceiver by rotating [VOL] fully counter clockwise, until it makes a “click” sound. Otherwise, a transceiver malfunction could occur.

Rapid charging with the BC-219N
You can rapidly charge the Li-ion battery pack with the BC-219N.

Charging time
Approximately 2.5 hours

Additionally needed item (purchase separately)
A power adapter (may be supplied with the charger, depending on the charger version) or the OPC-515L/ CP-23L DC POWER CABLES.
CAUTION: NEVER reverse the polarity when connecting the OPC-515L to a power source. This will ruin the battery charger. White line: +, Black line: _

Rapid charging with the BC-214
You can rapidly charge up to 6 battery packs with the optional BC-214.

Charging time:
Approximately 2.8 hours

Additionally needed items (purchase separately):

• The BC-157S AC ADAPTER or the OPC-656 DC

POWER CABLE

• The AD-132N CHARGER ADAPTER (may be supplied with the charger, depending on the charger version)

CAUTION: NEVER reverse the polarity when connecting the OPC-656 to a power source. This will ruin the battery charger. White line: +, Black line: _

Rapid charging with the BC-226
Charging time:
Approximately 2.7 hours

–

• To connect the power adapter to the charger, remove the charger’s left cover.
• A different type, or no power adapter is supplied, depending on the charger

Connecting BC-226 together

• You can connect up to 6 BC-226 together
• .Remove the charger’s right cover.
• Snap the DC power plug to the other charger’s DC power jack.

WARNING: DO NOT connect more than 6 chargers together. It may result in an electric shock, cause a fire, overheating, or damage chargers.

NOTE:
The transceiver MUST be turned OFF while charging. Otherwise:

• The battery will not be charged
• The battery life may be
• Do not transmit while charging. When you need to transmit, remove the transceiver from the charger, and then turn ON the power.
• If the battery pack does not properly charge when it is attached to the transceiver, remove it from the transceiver and insert only the battery pack into the charger.

Information
Status indicator

Light color

|

Status

---|---

Orange

| Charging

Green

| Charging is completed.

Blinks orange and green

| Charging failed. It may have some problems.

BC-226 Fuse replacement
If a fuse blows, find and repair the cause of the problem. Then replace the damaged fuse with a new, adequately rated fuse Fuse type: 5 A/58 V (low profile mini blade fuse)

NOTE: Remove the fuse using the needle-nose pliers.

OPTIONS

Some options may not be available in some countries. Ask your dealer for details.

BATTERY PACKS

BP-290 Li-ion BATTERY PACK
Voltage:       7.2 V
Capacity:     1910 mAh (minimum), 2010 mAh (typical)
Battery life: Approximately 13 hours
BP-291 BATTERY CASE
Battery case for AA alkaline batteries.
BP-294 Li-ion BATTERY PACK
Voltage:     7.2 V
Capacity:   3050 mAh (minimum), 3150 mAh (typical)
Battery life: Approximately 18.5 hours

CHARGERS

• BC-226 DESKTOP CHARGER + BC-228 AC ADAPTER
  For rapidly charging battery packs. Charging time: Approximately 2.7 hours
  A power adapter may be supplied, depending on the charger’s version.

• BC-214 MULTI-CHARGER+BC-157S AC ADAPTER, OPC-656 DC POWER CABLE
  For rapidly charging of up to 6 battery packs simultaneously. Charging time: Approximately 2.8 hours
  The AD-132N CHARGER ADAPTER adapter may be needed, depending on the charger’s version.
  The BC-157S AC ADAPTER or OPC-656 DC POWER CABLE must be purchased separately

• BC-219N DESKTOP CHARGER + BC-123S AC ADAPTER
  For rapidly charging of battery packs.
  Charging time: Approximately 2.5 hours for the BP-290
  A power adapter may be supplied, depending on the charger’s version.

• BC-225 INTELLIGENT DESKTOP CHARGER+ BC-123S
  AC ADAPTER + RS-BC225 READER SOFTWARE
  For rapidly charging battery packs.
  You can check the charging status using the RS-BC225. Charging time: Approximately 2.5 hours for the BP-290
  A power adapter may be supplied, depending on the charger’s version.
  An USB (Micro-B) cable is required to connect the BC-225 and a PC with the RS- BC225 installed.

DC CABLES

• CP-23L CIGARETTE LIGHTER CABLE Used when charging battery packs through a 12 V cigarette lighter socket. For use with the BC-219N.
• OPC-515L, OPC-656 DC POWER CABLES

ANTENNAS

• FA-SC26VS, FA-SC27VS, FA-SC56VS, FA-SC57VS FA-SC26US, FA-SC73US STUBBY ANTENNAS Shorter VHF or UHF
  FA-SC26VS: 136 ~ 144 MHz FA-SC27VS: 142 ~ 150 MHz
  FA-SC56VS: 150 ~ 162 MHz FA-SC57VS: 160 ~ 174 MHz
  FA-SC26US: 400 ~ 450 MHz FA-SC73US: 450 ~ 490 MHz

• FA-SC25V, FA-SC28V, FA-SC29V, FA-SC01U, FA-SC25U, FA-SC57U, FA-SC72U FLEXIBLE ANTENNAS VHF or UHF antennas.
  FA-SC25V: 136 ~ 150 MHz   FA-SC28V: 148 ~ 162 MHz
  FA-SC29V: 160 ~ 174 MHz   FA-SC01U: 350 ~ 400 MHz
  FA-SC25U: 400 ~ 430 MHz   FA-SC57U: 430 ~ 470 MHz
  FA-SC72U: 470 ~ 520 MHz

• FA-SC61VC, FA-SC61UC CUT ANTENNAS

• FA-SC62V, FA-SC63V HIGH GAIN ANTENNAS

BELT CLIPS and BELT HANGERS

• MB-136, MBB-3 BELT CLIP
• MB-96F, MB-96FL, MB-96N BELT HANGERS

OTHERS

• HM-222, HM-222H SPEAKER MICROPHONE
  With an Emergency key.
  These microphone meet IP68 requirements for waterproof protection
  High audio output is only usable with transceivers that support the function. (With a “U” mark on the serial number label)

• HM-233GP GPS SPEAKER MICROPHONE
  The microphone with high-performance GPS receive

• HM-163MC TIEPIN TYPE MICROPHONE

• + EH-15B EARPHONE, SP-26 TUBE EARPHONE, SP-28 EAR HOOK TYPE EARPHONE

• SP -32Tube type Earphone
  For use with EH-15B.

• SP-27 TUBE EARPHONE, SP-29 EAR HOOK TYPE EARPHONE,

• SP-40 EARPHONE + AD-135 EARPHONE ADAPTER

• AD-135: Used to connect an earphone to the transceiver’s multi-connector.
  To connect an accessory. See the AD-118 instruction sheet for details on recommended accessories.

CAUTION: The AD-118 does not have waterproof protection. When it is connected, NEVER expose the adaptor and the transceiver to rain, snow or any liquids.

• LC-187, LC-188* CARRYING CASE
  For use with the BP-290.

• LC-190* CARRYING CASE
  For use with the BP-294.
  Remove the carrying case from the transceiver before charging.

• VS-5MC* PTT SWITCH CABLE+ HS-94, HS-95, HS-97 HEADSET VS-5MC: Used to connect a headset to a transceiver. HS-94:  Ear-hook type          HS-95: Neck-arm type HS-97:  Throat microphone  Non-waterproof.

• VS-3 Bluetooth® HEADSET The Bluetooth headset with a [PTT] switch.

About the third party Bluetooth headsets:
I-com has checked the PTT operation with some 3M Peltor headsets such as the WS Headset XP, WS Pro-Tac XP and WS Alert XP. (Compatibility not guaranteed.)
The VS-3 and the third-party Bluetooth headsets are usable only by the transceiver with the Bluetooth function.

References

• Support | Icom Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>