comsol WCD20 20W Dual Wireless Fast Charging Pad User Manual

comsol WCD20 20W Dual Wireless Fast Charging Pad

| Qi Certified
Certification program ensures this charger has passed rigorous tests to guarantee safety, compatibility and energy efficiency.
---|---

Compatibility

Compatible with Qi-enabled devices* including

• iPhone 11 Pro/11
• iPhone XS/XS Max/X
• iPhone X/8/8 Plus
• Samsung Galaxy Fol
• Samsung S1 0/S9/S
• Samsung Note 10/9/8/5
• Huawei P30 Pr
• Huawei Mate 30/20 Pr
• Google Pixel 3/3 XL
• Sony Xperia XZ2
• LG G7 Thin
• LG V30+

Features

• Each charging pad can support up to 10W of power for a total power output of 20W

• Supports 7.5W Apple wireless fast charging for iPhone 8 or later

• Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more

• Supports SW standard wireless charging for all Qi enabled devices

• No need to remove your protective case. Works with most cases up to 3mm thick

• LED indicator to show charging status

• Smart IC enables energy saving mode when device is fully charged

• Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection

• Includes certified 30W USB-C PD wall charger with 1.5m USB-C to USB-C charging cable

• Check with device manufacturer for Qi wireless compatibility

Wireless Charger Operation

• Connect the dual wireless charging pad to the included AC adapter
• The red LED will be on for 3 seconds to indicate the charging pad is powered on and in stand-by mode
• Place one or two Qi enabled wireless phones on either charging pad and your phones should start charging automatically
• The LED will flash green to indicate charging
• If your phone does not not start charging, move your phone until the correct position is found and your phone starts charging
• When your phone is fully charged, the Smart IC enables energy saving trickle charge mode

Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.

Specifications

• Wireless Standard: WPC/Qi (v1 .2.4)
• Quantity of Wireless Charging Coils: One Coil per Pad
• Input: DC 12V 2.5A
• Output: 5W / 7 .5W / 1 OW
• Working Frequency: 110 to 205KHz
• Charging Distance: 3 to 8mm
• Charging Efficiency: >72%
• Dimensions: 185 x 87 x 11 mm

Important Safety Instructions

• Only use original or reputable third party chargers and cables
• Do not get wet to avoid causing short circuit damage and leakage
• Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
• Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
• Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the charging pad

iPhone is a trademark of Apple inc., registered in the U.S. and other countries.
The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc.

www.mycomsol.com.au

Documents / Resources

| comsol WCD20 20W Dual Wireless Fast Charging Pad [pdf] User Manual
WCD20 20W Dual Wireless Fast Charging Pad, WCD20, 20W Dual Wireless Fast Charging Pad, Fast Charging Pad
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>