Comsol PBE10BK 10,000mAh USB-C PD Power Bank Charger User Manual
- June 5, 2024
- comsol
Table of Contents
Comsol PBE10BK 10,000mAh USB-C PD Power Bank Charger User Manual
Power Bank Layout
- USB-A Output
- USB-C In/Output
- Micro USB Input
- Power On/Off
- Capacity LEDs
Features
- Suitable for iPhone/iPad/iPod
- Suitable for most smartphones and tablets including Samsung Huawei, Google, LG, Motorola, Sony, Oppo, Xiaomi, OnePlus
- Ideal for smartwatches, wearables, cameras and headphones
- Battery type: Lithium-Polymer
- Get an extra 25 hours of streaming video playback on an iPhone 12 or 20 hours on a Samsung Galaxy S20
- Smart Power Chip identifies your device and provides maximum power for speedy charging times
- 2A high output for fast charging of iPad or tablet
- Rechargeable more than 500 times
- Includes 20cm USB-A to USB-C cable to charge power bank
- Built-in over charging and short circuit protection
- Watt Hour Rating: 37Wh
- USB-C Input: DC 5V 3A
- Micro USB Input: DC 5V 2A
- USB-C Output: DC 5V 3A
- USB-A Output: DC 5V 2.1A
- Total Output: 15W
- Charging Time: 4 to 6 hours depending on charger output
- Size: 98mm (L) x 64mm (W) x 23.5mm (H)
- Weight: 220g
- Certifications: RCM, RoHS, UN38.3
To Charge Power Bank
- To charge using the USB-C input port, use the included USB-A to USB-C cable and connect the USB-C input port on the power bank to a USB wall charger
- To charge using the micro USB input port, use a micro USB cable (not included) and connect the micro USB input port on the power bank to a USB wall charger
- During charging the four LED’s will flash to indicate charging capacity status
- When charging is complete all LED’s will be on
To Charge Phone or USB Device
- To charge a phone or other USB device from the USB-A port, use the included USB-A to USB-C cable or your device’s original charging cable
- To charge a phone, tablet or other USB device from the USB-C port, use your device’s original USB-C charging cable
- If charging doesn’t start, press the On/Off button to start charging
- When your phone or device is fully charged, the power bank will automatically turn itself off
To Check Remaining Capacity
- Press On/Off button and LEDs will show remaining capacity
- The LEDs will turn off automatically after approx. 20 seconds
CAUTION
-
Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused. If you drop or damage your power bank, discontinue use immediately.
-
If crushed, punctured, exposed to fire or high temperatures or disassembled, batteries may catch fire, explode or cause burns.
-
If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner.
Continued use may cause the power bank to catch fire or explode. -
Do not charge the power bank and your device at the same time. It may cause the power bank to overheat.
-
Store power bank in a cool and dry place. Do not store in hot or humid environments. Eg. In a car or directly in the sun.
-
Power bank usage by children should be supervised.
-
Do not put your power bank in a handbag, backpack or other bag where small metal objects can cause a short circuit.
-
Do not dispose of power bank in heat or fire.
-
All Comsol power banks have safety power cut off features to stop overcharging & overheating. However, we recommend disconnecting the power bank once it is fully charged and removing all cables.
-
When charging a device, the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
-
In normal conditions, battery performance will decline over several years.
-
Operating temperature should be between 10˚c to 45˚c.