comsol WCTW15 15W Wireless Fast Charging Stand User Manual
- June 5, 2024
- comsol
Table of Contents
comsol WCTW15 15W Wireless Fast Charging Stand
Compatibility
*Compatible with Qi-enabled devices including**
- iPhone 12 Pro/Max
- iPhone 12/mini
- iPhone 11 Pro/11
- iPhone SE/XS/XS Max/XR
- iPhone X/8/8 Plus
- Samsung S20/S10/S9/S8\
- Samsung Note 20/10/9
- Google Pixel 5/4/3
- Sony Xperia XZ3/XZ2
- Xiaomi Mi 10/Mi 9
- LG G8S/G7 ThinQ
- LG V30+/V40
Features
-
Charge your wireless phone and wireless earbuds at the same time – AirPods and other TWS models must have a wireless charging case
-
Two coils on the stand enable large wireless coverage to allow phone charging in portrait or landscape modes
-
Supports 7.5W wireless fast charging for iPhone 8 or later
-
Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more
-
Supports 5W standard wireless charging for all Qi-enabled devices and 15W wireless fast charging for NextGen devices
-
No need to remove your protective case. Works with most cases up to 3mm thick
-
LED indicator to show charging status
-
Full safety protection for your devices with Qi-certified temperature control, strict voltage regulation & short circuit protection
-
Includes certified QC 3.0 USB wall charger and 1.5m USB-A to USB-C charging cable
-
Check with device manufacturer for Qi wireless compatibility
Wireless Charger Operation
- Connect the wireless charging stand to the wall charger using the included cable
- The below table explains the LED indicator function
| Func�on | LED Indicator |
|---|---|
| Standby | LED Off |
| Phone Charging | BLUE Solid On |
| AirPods/TWS Charging | GREEN Solid On |
| Phone & AirPods/TWS Charging | BLUE/GREEN Flashing Alterna�vely Slowly |
| Phone Charging Error | BLUE Flashing Quickly |
| AirPods Charging Error | GREEN Flashing Quickly |
| Phone & AirPods/TWS Charging Error | BLUE/GREEN Flashing Alterna�vely Quickly |
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Wireless Charging Coils for Phone: Two Coils
- Wireless Charging Coil for AirPods/TWS: One Coil
- Input: DC 5V/3A 9V/2A 12V/1.5A
- Stand Output: 15W / 10W / 7.5W / 5W (Max)
- AirPods/TWS Output: 3.5W (Max)
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: up to 80%
- Dimensions: 121 x 82 x 73mm
Important Safety Instructions
- Only use original or reputable third-party chargers and cables
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging stand
Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.
iPhone is a trademark of Apple inc.,
registered in the U.S. and other countries.
The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>