EKVIP 021656 Christmas Village Instruction Manual
- June 3, 2024
- EKVIP
Table of Contents
EKVIP 021656 Christmas Village
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Only use the supplied mains adapter.
- Only intended for indoor use.
- Check that no light sources are damaged.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress.
- This is not a toy. Be careful if using the product near children.
- The product is not intended to be used as general lighting.
- Never attempt to stop or block moving parts.
- Store the product in a cool and dry place when not in use, and protected from direct sunlight.
- Recycle the product when it has reached the end of its useful life in accordance with local regulations.
SYMBOLS
| Read the instructions.
---|---
| Only intended for indoor use.
| Safety class III
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated input voltage | 230 V ~ 50 Hz |
|---|---|
| Rated output voltage | 12 VDC |
| Output | 3.8 W |
| Size | L 23.3 x W 37.5 x D 21.5 cm |
| Protection rating | IP 20 |
| Cord length | 1.8 m |
INSTALLATION
- Remove all the parts of the product from the packaging.
- Place the product on a firm, level surface.
- Put the santa and the reindeers on the bar.
- Put the roof on the building.
- Connect the mains adapter to the product.
FIG. 1
USE
-
Carefully remove the product and all the accessories from the packaging. Save the packaging for safe storage of the product.
-
Place the product on a level, stable surface near a suitable power point.
Do not clutter the area around the product with other items. -
Plug the mains adapter into the back of the product and plug the adapter into a power point.
-
Select the required mode with the switch on the back of the product. Select mode ON1 for light, music and animation, mode ON2 for only light and animation (no music) or mode OFF to switch off the product.
NOTE:
Unplug the mains adapter from the power point when the product is not in
use.
Documents / Resources
|
EKVIP 021656 Christmas
Village
[pdf] Instruction Manual
021656 Christmas Village, 021656, Christmas Village, Village
---|---