KLARSTEIN 10032875 Aromatica II Thermo Coffee Maker Machine Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10032875 Aromatica II Thermo Coffee Maker Machine
TECHNICAL DATA
SAFETY INSTRUCTIONS
Disposal of packaging
PRODUCT DESCRIPTION
CONTROL PANEL, BUTTONS, AND INDICATORS
START AND OPERATION
CLEANING AND MAINTENANCE
TROUBLESHOOTING
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10032875 Aromatica II Thermo Coffee Maker Machine

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number 10032875, 10032876
Power supply 220-240 V ~ 50/60 Hz
Power consumption 1000 W
Max. capacity (water tank) 1.25 l

SAFETY INSTRUCTIONS

General safety

Read the manual carefully before use and keep the manual for future reference.
Only use the appliance and the accessories for their intended purposes and do not use the appliance and the accessories for other purposes than described in the manual.
Do not use the appliance if any part or any accessory is damaged or defective. If a part or an accessory is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
Children should be supervised to ensure that they do not play with the appliance.
The use of this appliance by children or persons with a physical, sensory, mental or motorial disability, or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.
Do not use the appliance near bathtubs, showers, basins or other vessels containing water.
Do not immerse the appliance in water or other liquids.
If the appliance is immersed in water or other liquids, do not remove the appliance with your hands. Immediately remove the mains plug from the wall socket. If the appliance is immersed in water or other liquids, do not use the appliance again.
This appliance is intended to be used in domestic and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed-and-breakfast type environments.

Electrical safety

Before use, always check that the mains voltage is the same as the voltage on the rating plate of the appliance.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Connect the appliance to an earthed wall socket. If necessary, use an earthed extension cable of suitable diameter (at least 3 x 1 mm²).
Make sure that water cannot enter the contact plugs of the main cable and the extension cable.
Always fully unwind the mains cable and the extension cable.
Make sure that the mains cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
Keep the mains cable away from heat, oil and sharp edges.
Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains cable or the mains plug is damaged or defective, it must be replaced by the manufacturer, an authorized repair agent or by a qualified person.
Do not pull the mains cable to disconnect the mains plug from the mains.
Disconnect the mains plug from the mains when the appliance is not in use, before assembly or disassembly and before cleaning and maintenance.

Safety instructions for coffee makers

Do not use the appliance outdoors.
Do not use the appliance in damp environments.
Only use the appliance in frost-free environments if the appliance is filled with water.
Place the appliance on a stable and flat the surface.
Place the appliance on a heat-resistant and splash-proof surface.
Do not place the appliance on a hob.
Do not place the appliance on hot surfaces or near open flames.
Make sure that the appliance does not come into contact with flammable material.
Keep the appliance away from heat sources.
Be careful with hot water and steam to avoid burns.
Store the appliance in a dry place when not in use. Make sure that children do not have access to stored appliances.

Disposal of packaging

WARNING
The danger of suffocation! Dispose of plastic packaging immediately so that children do not injure themselves.

PRODUCT DESCRIPTION

On/off button Coffee quantity indicator
Grinding button Coffee strength indicator
Coff ee quantity selector Timer indicator
Coffee strength selector Descaling indicator
Timer button
Hour button
Minute button
Display
Ground coffee
fineness selector
Permanent filter
Filter holder assembly
Release button (filter holder assembly)
Coff ee bean compartment
Water reservoir
Water level indicator
Coff ee pot
Storage plat
Grinding compartment
Carbon filter holde
Brush/screwdriver
Steam hole
Descale button (button 3+4)
Water tank cove
Carbon filter mounting
Carbon filter
Coff ee bean
compartment cover

CONTROL PANEL, BUTTONS, AND INDICATORS

START AND OPERATION

Before Initial Use

Clean the appliance. Refer to the section “Cleaning and maintenance”.
Clean the accessories. Refer to the section “Cleaning and maintenance”.

Setting the clock (fi g. B & C)
If the mains plug is inserted into the wall socket, the display (8) will light to indicate that the clock can be set. The clock can be adjusted at any time later on.

Repeatedly press the hour button (6) to set the hours.
Repeatedly press the minute button (7) to set the minutes.
The time is shown on the display (8).

CAUTION:
Risk of scalding! Keep your hands, face and other body parts away from the steam hole. The steam from the appliance becomes very hot during use. Do not cover the steam hole.

The appliance can be used for making coffee with coffee beans or ground coffee.
Before first use, the appliance is set to make coffee with coffee beans.
After each use, the appliance will memorize the last used setting for the next use: making coffee with coffee beans or making coffee with ground coffee. Note: The appliance can only be used when the display is activated. If the display is not activated, press any button to activate the display. The appliance is ready for use.

Setting the coffee quantity (fi g. B & C)

The coffee quantity selector (3) is used for setting the required coffee quantity. It can be set to 2, 4, 6, 8 or 10 cups.
Repeatedly press the coffee quantity selector (3) to set the coffee quantity. The number of cups (A) is shown on the display (8).
Aroma function: Long press the coffee quantity selector (3) to enter the „AROMA“ stage, the icon lights up and the heating tube is heated up at intervals.

Setting the coffee strength (fig. B & C)

The coffee strength selector (4) is used for setting the required coffee strength. It can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong coffee (STRONG).
Repeatedly press the coffee strength selector (4) to set the coffee strength. The coffee strength (B) is shown on the display (8).

Delay start function (fig. B & C)
The appliance has a delay start function which makes it possible to program the time for starting the coffee-making process. The delay start can be selected via the timer button (5).

Set the clock. Check whether the clock has already been set. If the clock has not been set, refer to the section “Setting the clock”.
Keep the timer button (5) pressed until the clock on the display flashes.
Repeatedly press the hour button (6) to set the hours.
Repeatedly press the minute button (7) to set the minutes.
Set the coffee quantity. Refer to the section “Setting the coffee quantity”.
Set the coffee strength. Refer to the section “Setting the coffee strength”.
If you want to make coffee with ground coffee, switch off the grinding function before using the delay start function.
Press the timer button (5) to save the settings. The timer indicator (C) lights continuously.
To interrupt the process, press the timer button (5) again. The timer indicator (C) goes off.

Filling the water reservoir (fig. D)

Before filling the water reservoir, switch off the appliance and remove the mains plug from the wall socket.
Do not fill the water reservoir with more water than required for making the coffee. Only use the amount of water required for making the coffee. The appliance automatically stops when the water reservoir is empty.
Do not use the appliance without water in the water reservoir.
Do not exceed the maximum mark (10 cups) when you fill the water reservoir. Make sure that the water level is always above the minimum mark (2 cups) during use.
Only use cold water to fill the water reservoir.
Do not use carbonated water or other liquids to fill the water reservoir.
Do not pour water in the coffee bean compartment.

To fill the water reservoir:

Open the cover (24).
Fill the water reservoir (14) with water up to the required mark on the water level indicator (15).
Do not fill the water reservoir with more water than required for making the coffee. Only use the amount of water required for making the coffee. The appliance automatically stops when the water reservoir is empty.
Close the cover (24).

Setting the ground coffee fineness (fig. E)

The ground coffee fineness selector (9) is used for setting the required fineness of the ground coffee when using coffee beans. It can be set to different positions from fine coffee grounds to coarse coffee grounds.
Turn the ground coffee fineness selector (9) to the required position to set the fineness of the ground coffee.

Removing/replacing the lid of the thermos jug

Remove the lid: Turn the lid anticlockwise. The lid can now be removed.
Fit the lid: Place the lid onto the jug so that the release lever is pointing to the right.Turn the lid clockwise until it stops. The lid is now closed.
Pour coffee: Press and hold down the release lever in order to pour out the contents of the thermos jug.

Making coffee with coffee beans (fig. A – H)

If the grinding function is not activated, press the grinding button (2) to activate the grinding function. The coffee quantity and the coffee strength are shown on the display.
Fill the water reservoir (14) with the required amount of water. Do not fill the water reservoir with more water than required for making the coffee. Only use the amount of water required for making the coffee. The appliance automatically stops when the water reservoir is empty.
Open the cover of the coffee bean compartment (27).
Fill the coffee bean compartment (13) completely with coffee beans.
Close the cover (27).
Set the ground coffee fineness. Refer to the section “Setting the ground coffee fineness”.
Press the release button (12) to open the filter holder assembly (11).
Place a suitable coffee filter in the coffee filter holder (10).
Close the filter holder assembly (11) until the release button (12) clicks into place.
Set the coffee quantity. Refer to the section “Setting the coffee quantity”.
Set the coffee strength. Refer to the section “Setting the coffee strength”.
Place the coffee pot (16) on the storage plate (18).
Switch on the appliance by pressing the on/off button (1). After a few seconds, the appliance starts grinding the coffee beans and making the coffee.
To interrupt the process, press the on/off button (1).
If the process is completed, the appliance will beep. The appliance can be switched off by pressing the on/off button (1).
Allow the appliance to cool down completely.

Making coffee with ground coffee (fig. A, B, C, D, F & G)

If the grinding function is activated, press the grinding button (2) to deactivate the grinding function. The coffee quantity and the coffee strength are not shown on the display.
Fill the water reservoir (14) with the required amount of water. Do not fill the water reservoir with more water than required for making the coffee. Only use the amount of water required for making the coffee. The appliance automatically stops when the water reservoir is empty.
Press the release button (12) to open the filter holder assembly (11).
Place a suitable coffee filter in the coffee filter holder (10).
Put the required amount of coffee in the coffee filter.
Close the filter holder assembly (11) until the release button (12) clicks into place.
Place the coffee pot (16) on the storage plate (18).
Switch on the appliance by pressing the on/off button (1). The appliance starts making the coffee.
o interrupt the process, press the on/off button (1).
If the process is completed, the appliance will beep. The appliance can be switched off by pressing the on/off button (1).
Allow the appliance to cool down completely.

CLEANING AND MAINTENANCE

Before cleaning or maintenance, always switch off the appliance, remove the mains plug from the wall socket and wait until the appliance has cooled down.
Do not immerse the appliance in water or any other liquids.
Do not use aggressive or abrasive cleaning agents to clean the appliance.
Do not use sharp objects to clean the appliance.
Regularly check the appliance for possible damage.
Clean the accessories:
Clean the coffee pot in soapy water.
Clean the coffee filter holder in soapy water.
Clean the lid of the coffee bean compartment in soapy water.
Thoroughly dry the accessories.
Clean the outside of the appliance with a damp cloth. Dry the outside of the appliance with a clean, dry cloth.
Put the appliance and the accessories in the original packaging
Store the appliance in a dry and frost-free place, out of the reach of children.

Cleaning the grinding compartment (fig. C & I)

Switch off the appliance.
Remove the mains plug from the wall socket.
Remove the coffee pot from the storage plate.
Empty the coffee filter holder. Place a suitable coffee filter. Close the filter holder assembly.
Release the lock on the cover (28) by pressing the small button.
Remove the cover (28).
Clean the grinding compartment (19) using the brush (21).
Mount the cover (28).

Descaling the appliance (fig. A – D)

The appliance must be descaled after each 70 brewing cycles. If you leave the mains plug in the wall socket, the appliance will keep track of the number of brewing cycles.
The indicator (D) will flash on the display to indicate that the appliance must be descaled.
If the appliance must be descaled, use a suitable descaling agent. Special descaling agents are available from local specialist shops.
Before descaling the appliance, remove the mains plug from the wall socket and wait until the appliance has cooled down
Do not immerse the appliance in water or any other liquids.
Make sure that the grinding function is not activated when descaling the appliance.

To start the descaling process:

Open the cover (24).
If necessary, empty the water reservoir (14).
Remove the carbon filter holder (20) from the water reservoir (14).
Fill the water reservoir (14) with a suitable descaling agent.
Place the coffee pot (16) on the storage plate (18).
Insert the mains plug into the wall socket.
Switch on the appliance by pressing the on/off button (1).
Let the appliance run until 1⁄3 of the descaling agent is in the coffee pot (16).
Switch off the appliance by pressing the on/off button (1).
Let the descaling agent work for approximately 30 minutes.
Switch on the appliance by pressing the on/off button (1).
Let the appliance run until the remaining descaling agent is in the coffee pot (16). The appliance stops automatically when the water reservoir (14) is empty.

Rinse the appliance twice according to the below procedure:

Fill the water reservoir (14) with clean water up to the maximum mark on the water level indicator (15).
Place the empty coffee pot (16) on the storage plate (18).
Switch on the appliance by pressing the on/off button (1).
Let all water run through the appliance. The appliance stops automatically when the water reservoir (14) is empty.

TROUBLESHOOTING

Problem	Possible Cause	Suggested Solution

No symbol in the display.

| Not plugged in.| Insert the plug.
No mains power.| Check the fuse/socket.
Display is defective.| Contact customer service.

The automatic circuit breaker in the fuse box trips

| Too many appliances connected to the same power

circuit.

| Plug the device into its own power socket.
Appliance defective.| Contact customer service.
Water runs out of the appliance| Too much water in the water

tank.

| Do not overfill the water

tank

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recyclingof electrical and electronic equipment. By disposing ofit in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.