Klarstein 10005399 MKS BROOKLYN Fridge User Manual
- June 5, 2024
- Klarstein
Table of Contents
- TECHNICAL DATA
- SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- OPERATING INSTRUCTIONS
- INSTALLATION
- INSTALLATION OF THE SLIDING HINGE
- CHANGING THE SIDE OF THE DOOR HINGE
- CARE AND MAINTENANCE
- TROUBLESHOOTING
- DISPOSAL CONSIDERATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
10005399 MKS BROOKLYN Fridge
User Manual
www.klarstein.com
10005439
10005440
10008168
110035223
10035226| 10005400
10008166
10032778
10035224
10035227| 10005439
10008167
10032779
10035225
10035228
---|---|---
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damage. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number| 10005399, 10005400, 10005439, 10005440, 10008166, 10008167,
10008168, 10032778, 10032779, 10035223, 10035224, 10035225, 10035226,
10035227, 10035228
---|---
| 220-240 V ~ 50/60 Hz
SAFETY INSTRUCTIONS
Information on the safety of children and persons at risk
-
This appliance may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided they are supervised during use or have received instruction in the safe use of the appliance and understand the risks involved.
-
Children aged 3 to 8 years may fill refrigerators with food and remove food.
-
Ensure that children do not play with the appliance.
-
Cleaning and maintenance of the appliance may only be carried out by children if they are at least 8 years old and supervised. ·
-
Keep all packaging away from children. There is a danger of suffocation.
-
When you dispose of the appliance, unplug it from the wall outlet, cut the power cord and remove the door. This will prevent children playing on the appliance from injuring themselves, getting hit or getting trapped.
-
If this machine replaces an older machine with a spring lock and latch on the door or lid, disable the spring lock and latch before disposing of the old machine. This will prevent children from getting trapped and suffocating.
General advice -
Keep ventilation openings in the unit housing or in the built-in cabinet free of obstacles.
-
Do not use mechanical devices or other means to speed up the defrosting process.
-
Do not damage the refrigerant circuit.
-
Do not use other electrical appliances, such as ice machines, inside refrigeration appliances unless they are approved for this purpose by the manufacturer.
-
If there is a light bulb inside the appliance, do not touch it. If it has been switched on for a long time, it can become very hot. The light bulb supplied with this unit is a special bulb that may only be used with the unit supplied. This light bulb is not suitable for household lighting.
-
Do not use the unit without the light bulb.
-
When setting up the machine, take care not to pinch or damage the power cord.
-
Do not store explosive substances such as spray cans containing a flammable propellant in this appliance.
-
During transport and installation of the unit, take care not to damage any components of the refrigerant circuit
-
Avoid naked flames and sources of ignition near the unit.
-
Thoroughly and regularly ventilate the room in which the unit is located.
-
It is dangerous to modify this product in any way. Any damage to the cable may cause a short circuit, fire or electric shock.
-
All electrical components such as the plug, power cord and compressor must be
-
replaced by a certified service centre or by qualified service personnel.
-
The power cord must not be extended.
-
Be careful not to pinch or damage the power plug. A pinched or damaged power plug may overheat and cause a fire.
-
Make sure that you can reach the power plug of the machine at any time.
-
Do not pull on the power cord.
-
If the power outlet is loose, do not plug in the power plug. There is a risk of electric shock or fire.
-
This machine is heavy. Be careful when moving it.
-
Do not touch the freezer compartment if your hands are damp or wet, as this may cause skin abrasions or cold burns.
-
Do not place the unit in direct sunlight.
-
This appliance is intended for use in the home and similar environments. These include:
– Staff kitchens in shops, offices and other working environments
– Farms, hotels, motels and other residential facilities
– Pensions that offer breakfast (Bed & Breakfasts) -
– Catering and similar applications outside the retail trade
This appliance contains the coolant isobutane (R600a),a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has,however,led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor,you might be able to hear the coolant flowing around the system. This is unavoidable,and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.
Notes on daily use
-
Do not put hot food in the machine.
-
Do not place food directly against the rear panel.
-
Frozen food must not be refrozen after defrosting.
-
Store packaged frozen food according to the instructions of the frozen food manufacturer.
-
Do not place carbonated fizzy drinks in the freezer compartment as the pressure they generate can cause them to explode and damage the appliance.
-
Open the door as rarely as possible.
-
Do not leave the door open too long.
-
Do not set the thermostat too low.
-
To reduce energy consumption, leave all accessories, such as drawers, shelves or racks in the appliance.
N otes on installation -
Unpack the machine and check for damage. Do not connect the machine if it is damaged. Report any damage immediately to the manufacturer. Save the original packaging for possible return shipment.
-
Wait at least four hours before connecting the unit to allow the coolant to distribute itself in the cooling circuit.
-
Ensure that there is sufficient air circulation around the unit. Otherwise, the unit may overheat.
-
If possible, the spacers on the unit should rest against the wall. This prevents burns caused by touching the hot compressor or condenser.
-
The unit must not be installed near radiators or cookers.
-
Make sure that the mains plug is always accessible after the unit has been installed
-
Install this unit in a location where the ambient temperature corresponds to the climate class indicated on the unit`s nameplate:
SN| Low| This cooling unit is designed for use at ambient temperatures of
10-32 °C.
---|---|---
N| Moderate| This cooling unit is intended for use at ambient temperatures of
16-32 °C.
ST| Subtropical| This cooling unit is intended for use at ambient temperatures
of 16-38 °C.
T| Tropical| This cooling unit is intended for use at ambient temperatures of
16-43 °C.
Notes on cleaning and maintenance
- Before cleaning and maintenance, switch the machine off and unplug the power cord from the wall outlet.
- Do not clean the machine with metal objects. Do not use sharp objects to remove frost from the machine. Use a plastic scraper.
- All electrical work required to service the unit should be performed by a qualified electrician or competent person.
Special instructions for freezers and chest freezers
- Children between the ages of 3 and 8 are allowed to fill refrigerators with food and remove food.
- When positioning the machine, make sure that the mains cable is not pinched or damaged.
- Ensure that there are no multiple sockets or power supply units on the rear of the machine.
To avoid contamination of food, please follow the instructions below:
- Prolonged opening of the door can cause a significant temperature rise in the compartments of the unit.
- Clean surfaces that may come into contact with food regularly. Clean the water drain regularly.
- Store raw meat and fish in suitable containers in the refrigerator so that meat and fish do not come into contact with or drip onto other foods.
Notes on the freezer compartments
- Two-star freezer compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
- One-, two- and three-star freezer compartments are not suitable for freezing fresh food.
- If the refrigerator is left empty for a long period of time, switch it off, let it defrost, clean it, dry it and leave the door open to prevent mould from forming in the appliance.
WARNING When using, servicing and disposing of the unit, pay attention to the left symbol on the rear of the unit or on the compressor. This symbol warns of possible fires. There are flammable substances in the refrigerant lines and in the compressor. Keep the appliance away from sources of fire during use, maintenance and disposal.
PRODUCT OVERVIEW
Model with glass door:
OPERATING INSTRUCTIONS
- Position your refrigerator so that the plug is accessible.
- Keep your refrigerator out of direct sunlight.
- Do not place next to heat generating appliance.
- Do not place directly on the ground. Provide suitable stand.
- The refrigerator will have better performance at ambient of 20-25 °C. We suggest the refrigerator be powered off if the ambient temperature is lower than 10 °C.
- After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage into the refrigerator compartment.
- Ventilation is very important for this kind thermoelectric refrigerator. The inside PCB will be broken easily if the ventilation is bad. It will also reduce the life of the refrigerator.
If leakage occurs (which can be easily detected due to the unpleasant smell), please
- Switch off the refrigerator immediately
- Ventilate the room thoroughly
- Call for the after sales service department
Note: The refrigerator applies automatic defrosting system, so there is
no need to defrost it manually.
Power supply
- The refrigerator must be connected to a properly earthed socket in line with relevant valid country regulations before operating.
- Check the data label (which is on the side of the refrigerator) for voltage and frequency corresponds to your local one. If not, don’t plug your cable into the socket.
INSTALLATION
When install a Heat pipe Refrigerator, ventilation should be considered seriously, please refer to the following:
- There should be left at least 200 cm³ for ventilation
- The distance between wall and refrigerator side should be at least 20mm
- The bottom should be left at least 50mm for air flowing
- Air passing through must not be preheated
- Entire cooling system should be considered in the ventilation the following four pictures show four installation ways:
INSTALLATION OF THE SLIDING HINGE
-
Use two self-screws to fix the sliding hinge.
-
After checking the suitable distance, use two self-screws to fix the bottom feet respectively.
-
If the refrigerator is closed, there should be have a distance of 1-2 mm between the wooden cabinet door and the surrounding.
-
There must be left a distance of 6-8mm between the wooden cabinet and the refrigerator door.
-
The maximum distance between the refrigerator’s and the cabinet’s hinge is about 40 mm.
CHANGING THE SIDE OF THE DOOR HINGE
Loosen the screws of the right hinge. Remove the upper and lower hinges. The
following parts are in the box:
1x Left hinge cover 2x hinges (top and bottom) 3x screws
Fasten the door to the appropriate position on the left side using the hinges
and screws. At the end, place the cover on the hinge.
INSTALLATION OF LOCK AND KEY
- The diameter of the lock hole is: 18 mm
- The distance between the bottom edge and the middle of the lock hole is: 62 mm.
CARE AND MAINTENANCE
Defrosting
- Frost may accumulate on the inside of the unit and defrost automatically during the compressor cycle.
- The water is led through the drain opening into the collecting tray above the compressor where it evaporates.
- Make sure that the drain hole is cleaned regularly so that the water can escape from the storage compartment.
Cleaning the Unit
- Remove all shelves and the vegetable compartment. First remove the lower door compartment so that you can remove the vegetable compartment.
- Wipe the inside of the appliance with a damp cloth and a little detergent. Then wipe with clear, warm water.
- Wash the shelves and the vegetable compartment in water with detergent and dry them before putting them back into the appliance. Clean the outside of the appliance with a damp cloth.
- The condenser grille on the back of the unit and the adjacent components can be vacuumed with a soft brush attachment.
TROUBLESHOOTING
Problem | Possible cause | Solution |
---|---|---|
Appliance does not work. | Mains plug is not plugged in or is loose | Insert |
mains plug.
Fuse has blown or is defective| Check fuse, replace if necessary.
The food is too warm.| Temperature is not properly adjusted.| Please look in
the initial Temperature Setting section.
Door was open for an extended period.| Open the door only as long as
necessary.
A large quantity of warm food was placed in the appliance within the last 24
hours.| Turn the temperature regulation to a colder setting temporarily.
The appliance is near a heat source.| Please look in the installation location
section.
Appliance cools too much.| Temperature is set too cold.| Turn the temperature
regulation knob to a warmer setting temporarily.
Unusual noises.| Appliance is not level.| Re-adjust the feet.
The appliance is touching the wall or other objects.| Move the appliance
slightly.
A component, e.g. a pipe, on the rear of the appliance is touching another
part of the appliance or the wall.| If necessary, carefully
bend the component out of the way.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea BN43 6RE
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>