KLARSTEIN 10029344 Skyscraper Heat Ceramic Column Heater Instruction Manual

SKYSCRAPER HEAT
10029344
www.klarstein.com

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10029344

TECHNICAL DATA

PRODUCT DATA SHEET

Model identifier(s):|
---|---
Item| Symbol| Value| Unit| | Item| Unit
Heat output| | Type of heat input, for electric storage local space heaters only
Nominal heat output| Phnom| 2,5| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| Pin| 1,5| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| Pmax,c| 2,5| kW| | electronic heat charge control with room and/ or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output| elmax| 2,444| kW| | Type of heat output/room temperature control
At minimum heat output| Elgin| 1,583| kW| | single-stage heat output and no room temperature control| no
In standby mode| USB| 0,5| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| yes
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| no
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany

Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the device if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the device.

SAFETY INSTRUCTIONS

• Make sure that children do not play with the device.

• Children may only clean the device under supervision.

• Keep children under 3 years of age away from the appliance and use the appliance in the presence of children only under supervision.
  Notes on location and operation

• The device can become very hot during operation. Therefore, place it at a sufficient distance from easily flammable objects such as curtains or furniture.

• Do not cover the unit.

• Do not place the unit directly under a power outlet.

• Do not connect the unit to an external timer or remote-controlled power outlet to prevent the unit from turning on automatically.

• Do not place the device in rooms where highly flammable or explosive liquids are stored.

• If you use the device together with an extension cable, make sure that the cable is fully unrolled.

• Do not connect the device to sockets where other devices are already connected.

• Do not place the unit near a bathtub, shower, or swimming pool.

• If the power cord or plug is damaged, it must be replaced by the manufacturer, an authorized service center, or a similarly qualified person.

• Do not leave the appliance out of sight during operation and keep children and pets away from the appliance.

• Do not place the appliance on trolleys or on surfaces from which it can easily fall.

• If you do not use the appliance for a long period of time, unplug the appliance from the power outlet. Do not leave the appliance unattended for long periods during operation. Do not pull the plug out of the outlet by the cord, but hold it with your hand when unplugging it.

• Position the appliance so that the airflow is not blocked by other objects.

• The power plug is waterproof when not in use. To avoid electric shock or leakage current, never use the appliance with wet hands or operate the appliance if there is water on the power cord.

Special safety precautions
Check the marking on the power cord before use. Depending on the power cord, this unit may operate in different environmental conditions:

Labeling

| Can be used in:|

Do not use in:

---|---|---
H07RN-F| Households, warehouses, workshops, construction sites, and greenhouses.|
H05RN-F| Households, warehouses, workshops, and greenhouses.| Construction sites
H05RR-F| Household, warehouses, and workshops| Construction sites and greenhouses

PRODUCT OVERVIEW

1| Operation panel| 5| Power switch
2| Remote control receiver window| **** 6| Power cord
3| Air outlet| 7| Base
4| Air inlet| 8| Wing screw

OPERATION PANEL

REMOTE CONTROL

ASSEMBLY

1. Take the devices out of the bubble bag, including the following four parts, master machine, base, remote controller, Wing screw
2. Put the master machine on a desktop, with the bottom reaching out, as picture 1 shows.
3. Connect the base with the machine’s holder, and tie the base with four pc wing screws, as picture 2 shows.
4. Erect the machine, and put it on an even and stable surface.

OPERATION

Operating panel

1. Press the Power switch which is on the back of the device, and the device enters into the energized state, and the heater is ready to use with a Bi sound, now all the functions and displays are off.
2. In the energized state, all the pressing are invalid except the key. Press the key, and the device starts working. Press it again, the device enters into standby mode.
   There is the following situation when in working condition.
   During operation the following functions are available:| Shift between low power (1600 W) and high power (2500 W). Operated at low heating power: low heating power indicator on. Operated at high heating power: Middle heating power on.
   ---|---
   | In working condition, press this key to make the device swing or not. Press Swing: the device will oscillate, and the indicator will be on. Press Swing again: the swing function turns off, and the indicator will be off.
   | Setting the time (press this key once in working condition)
   • The time indicator will be on. The light will flicker twice per second. At this time press the „UP (+)“ and the „DOWN (-)“ key to set the timer (within a range of 1-12 hours), the timer will add or subtract 1 h with every press.
   • Enter into the timer setting mode, the timer that has been set before can not be changed. You can reset the time, only when pressing the „UP (+)“ and „DOWN (-)“keys.
   • If the timer turns to value 0, then the device will turn off at once, and enter into standby mode.
   • Press the SET key, the timer setting is finished, and enter into temperature setting.
   | Setting the temperature (press this key twice in working condition)
   • The light indicator will be on. The LED will flicker twice a second. You can change the temperature by pressing the „UP (+)“ and „DOWN (-)“ key. The range of temperature is from 15 to 28 °C.
   Press the SET key to quit the temperature setting, and the temperature that you have set will be effect at once.
   • If no operation to the keys after 5 seconds or press other keys except „UP (+)“ and „DOWN (-)“ then the LED indicator will showroom temperature.

Functioning of temperature and timer function

• If the temperature is -10 °C, then it will show “LO”. If the temperature is over 40 °C, then it will show “HI“.

• The device will not judge the temperature within 10s when power on the device. After the device work for 10s, if the ambient temperature reaches or is over the temperature that has been set, the heating function will turn off, the low/high heating power light will be off, and the fan will be off in 10 seconds.
  If you have pressed Swing, it will turn off as well. The other indicators will not change.

• If the ambient temperature decreases and 2 °C is lower than the temperature that has been set, the heating function will be on again, as well as the fan & the swing function (if you have pressed Swing before). Also, the other indicators will be on.

• If the ambient temperature reaches or is over the automatically set temperature of 25 °C, then the device will work when you set the temperature over 25 °C.

• When setting the time & temperature at the same time, it will show in a circle, time show 30 seconds, and not show temperature. Then the temperature is shown for 30 seconds instead of the time. If you do not set the timer or set the timer to 0, then the time will not show.

MAINTENANCE

Changing the battery

• Pull out the battery door at the backside of the remote control.
• Pay attention to the battery polarity, and insert the battery (CR2032) into the tray of the door.
• Push the battery door into the remote control.
  

Cleaning

• Make sure that the device is switched off before cleaning or maintenance.
• Wipe the surface of the device by using a clean wet cloth or punctuate washing-up liquid.
• Do not use the washing-up liquid which is mordant, like petrol, Do not submerge in water. Do not use chemical liquids.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>