CYC MOTOR APT 750c Colour Display User Guide
- June 5, 2024
- CYC Motor
Table of Contents
APT 750c Colour Display
User Guide
The information contained in this document is derived from the TFT LCD Display Guide provided by Tianjin APT Science and Technology Co., Ltd. (otherwise known as APT). All the information contained in this user manual is published in good faith and for general information purposes only. Contact technical_support@cycmotor.com for further assistance.
Product Specifications
Electrical Parameters
- 3.2inch IPS screen
- 36V/48V/52V/72V battery supply
- Rated operating current: 40mA
- Off leakage current < 1uA
- Max output current to controller: 100mA
- Operating temperature: -20 – 70 °C
- Storage temperature : -30 – 80 °C
Dimensions & Materials
Materials
Product shell – ABS plastic
Transparent window – High strength Acrylic
Dimensions
L 110mm x W 68.2mm x H 68mm
Features
-
Suitable for low temperature: Max -20 ℃.
-
High-contrast 3.2inch IPS colorful matrix screen.
The information contained in this document is derived from the TFT LCD Display Guide provided by Tianjin APT Science and Technology Co., Ltd. (otherwise known as APT). All the information contained in this user manual is published in good faith and for general information purposes only. Contact technical_support@cycmotor.com for further assistance. -
Ergonomic external button design, easy to operate.
-
Speed display: AVG SPEED, MAX SPEED, SPEED (Real-time).
-
Kilometer / Mile: Can be set according to the user’s preference.
-
Smart battery indicator: Provide a reliable battery indication.
-
9-level Assist : 3-level/5-level/9-level optional.
-
Mileage indicator : Odometer/Trip distance/ Clock/ Riding time.
-
Power indicator: Real-time power indication; digital or analog.
-
Error code indicator.
Main Functionalities
Power On/ Off
Press and hold the POWER button for 1 second to turn the display on/ off. The
display will automatically shut down when there is no operation for a period
of time.
Mode Switch
Double press the POWER button to change between Race Mode & Street Mode. Note
that this will not change the mode in real-time but rather set the start-up
mode (Street Mode recommended). Change the mode in real-time via the mobile
app.
The information contained in this document is derived from the TFT LCD Display Guide provided by Tianjin APT Science and Technology Co., Ltd. (otherwise known as APT). All the information contained in this user manual is published in good faith and for general information purposes only. Contact technical_support@cycmotor.com for further assistance.
Assist Level Operating
Short press the UP/ DOWN button to change the assist level. The top assist level is 9 where 0 is neutral. The number of assist levels can be adjusted according to the user’s preference.
Speed Display Switch
Short press the MENU button to change the speed mode: Speed->AVG Speed->MAX
Speed.
RT = Real-time speed
AVG = Average speed
MAX = Maximum speed
*If there is no operation for 5 seconds, the display will return to real-time speed automatically.
Mileage Display Switch
Short press the POWER button to change the mileage mode: Trip->ODO-> Time-> Range.
Parameter Settings
Button Navigation
Double press the MENU button to get into the settings menu. The press interval must be less than 0.3 seconds.
Press the POWER button to change between the Display Settings & Basic Settings.
Press the UP/DOWN buttons to change between the parameters, the MENU button to select, & UP/DOWN to change the selected parameter.
Press the MENU button to deselect parameters & to set changes made.
- The display will automatically quit the settings menu when there is no operation for 30 seconds.
- For safety reasons, the display cannot get into the settings menu when riding.
- The display will quit the settings menu when the user starts riding.
Display Settings
System
Press the UP/ DOWN button to change between Metric & Imperial.
Brightness
Press the UP/ DOWN button to change the brightness of the display’s backlight.
“I” is the darkest & “IIIII” is the brightest.
Auto-off
Press the UP/DOWN button to change the auto power-off time. This can be set
between 1 0to 9 minutes or off.
Battery Ind
Press the UP/DOWN button to change your battery indication. This can be set to
Voltage, Capacity, Percentage, or off.
Self – Testing
Please ignore! This setting is for CYC Motor Ltd use only. DO NOT attempt to
change these settings as you risk corrupting display settings.
Clock
Press the MENU button get into the clock setting menu. Then, press the UP/DOWN
button to set Year/ Month/ Day/ Hour/ Min/ Sec.
Basic Settings
Wheel
Press the UP/DOWN button to change the wheel settings. The optional wheel
diameter is 16 to 29 inches.
Battery
Press the UP/DOWN button to change battery voltage settings. The optional
battery voltages are 36V to 72V. Kindly note that some older 750c displays
might not have the 36V setting.
Start password
Press the MENU button to get into the password setting menu. Start input ON
will switch on password upon start-up.
You need to input the right password before starting within 30 seconds. The display will power off automatically if the password is entered incorrectly three times.
Advance setting
Press the MENU button to get into the advance settings menu. You will need to
enter your Start Input Password. The default password is 1919.
There is only 1 parameter that needs to be set as all others should be neglected and will not affect your system: Assist levels.
Go to the NEXT PAGE on the display. Here, you can choose the number of assist levels (or gears) accordingly. The available options are 3, 5, or 9 assist levels.
The power output will be distributed evenly across the chosen number of assist levels (or gears) according to the Assist Level Configuration and Speed Limit Assist settings on your CYC Motor (BAC) mobile app:
Note that the App Assist Level shown below can be customized in the app.
Factory setting
Press the MENU button to enter the factory settings menu. Selecting YES will
restore all parameters on the display to factory settings. Note that this will
not affect your app settings.
Information
Press the MENU button to show information of the eBike, including the average
and maximum speeds, the current trip distance, ODO, and range.
Press the MENU button to select Product Infor. This menu will show you the display’s information including its hardware and software versions as well as the display’s serial number.
Press the MENU button to select Battery Infor. This menu will show you all the battery information provided that the information is supported by the battery communication system.
Error Codes
In certain circumstances, an error code may appear on your display. Refer to the CYC Motor (BAC) mobile application user guide for instructions on how to clear the errors and for further details on what these errors entail. Contact technical_support@cycmotor.com for assistance.
| Error Code | Description |
|---|---|
| Error 21H | Instant resume not enabled |
| Error 22H | Throttle error |
| Error 24H | Hall sensor error |
| Error 30H | Communication error |
Assembly Information
Note the torque requirements described above as excessive torque can cause damage.
Compatibility
The clamps are suitable for 3x different handlebar sizes: 31.8mm, 25.4mm, and 22.2mm.
There are transfer rings included for 25.4mm and 22.2mm (marked with L or R) as shown below. Be sure to pay attention to the directions below to insert the transfer rings correctly.
Pin Layout
- Red wire: Anode(36V to 72V)
- Black wire: GND
- Yellow wire : TxD (display -> controller)
- Green wire : RxD (controller -> display)
- Blue wire: Power cord to the controller
Certification
CE / IP65 (waterproof) / ROHS.
Quick start guide
After unboxing and installing your X1 Pro or X1 Stealth, there are a few things you need to set up and check.
STEP 1
Ensure that all wires are properly connected and that your system can switch
on by pressing the display’s power button. Check that the display shows your
battery voltage and level.
Should your display briefly show error 30H upon start-up, this is normal as
the system takes a moment to connect. Should your battery voltage and level
not display refer to step 3.
STEP 2
Ensure that your pedal assist and throttle are working correctly. To test this, connect to the CYC Motor (BAC) mobile app and change to Assist Level 0 on your display. You can test the PAS by looking at the app’s dashboard and turning the crankset. If your Average Pedal RPM reading changes, then your PAS is working. To test the throttle, open your throttle and check that your Throttle In voltage changes. Ensure that you test the PAS and throttle in Assist Level 0 as to not make the bike thrust forward.
STEP 3
Set up the correct information on your display. You will need to enter your
wheel diameter, battery voltage (if incorrect), & your preferred number of
assist levels.
Be sure to contact technical_support@cycmotor.com if further assistance is needed.
THANK YOU!
The information contained in this document is derived from the TFT LCD Display Guide provided by Tianjin APT Science and Technology Co., Ltd. (otherwise known as APT). All the information contained in this user manual is published in good faith and for general information purposes only. Contact technical_support@cycmotor.com for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>