ACCUD CR2032 Stainless Steel Digital Caliper User Manual

Table of Contents

ACCUD CR2032 Stainless Steel Digital Caliper
Fig1

To obtain the highest performance from the digital caliper, carefully read this user’s manual prior to use.
Wor1<ing temperature is 0-40’C. relative humidity should not exceed 80%.
Please clean the measuring faces with soft doth before use.
After installing the battery, pull the calipers to ensure it moves smoothly and show noonaly; Close the measuring jaws make sure there Are no gaps.

Unscrew the battery cover counterclockwise.
Put CR2032 battery into battery house, the positive side of battery(+) should face out.
install the battery cover at clockwise direction

‘ON/OFF’ Is to tum on/off
‘ZERO’ is to set zero
‘mm/in’ is for mm and inch conversion Automatic shutdown f0t about five minutes. Press the’ ON/OFF’ button or move the digital unit to tum on display,

ACCUD CR2032 Stainless Steel Digital Caliper
Fig4

Close the e>demal jaws and set zero before use. The caliper should be checked regularly,ty to make sure that it is property initial reading sel on To get accurate measurement it is necessary to control the force.
Measurement posture should be consistent with setting zero.
Do not measure the rotation of objects.
One battery can last for one year of use. W there Is nothing on display or digits blurring, battery voltage Is too low, please replace gallery. If the button does not work o, digits do not change, take out the battery and pul It back after 1 minute.

After use, the product needs oiling protection against rust.
If a caliper is not be used for a long time, please remove the battery. Otherwise, Uquid may leak from the battery end damage the caliper.

Read User Manual Online (PDF format)