CYC MOTOR B-36 B-Series Batteries User Manual

CYC MOTOR B-36 B-Series Batteries User Manual

SAFETY & PRECAUTION

General Safety

Kindly read through the entire user manual. This manual contains important information to reduce user risk as well as instructions for this product’s proper use. Do not discard the manual but keep it for reference. Note that the user’s personal safety remains the user’s responsibility and that the user must contact CYCMotor Ltd or their official product dealer directly for any further guidelines or assistance. This product is an electrical system that is dangerous for children and must always be handled by an adult. Small components and accessories may also present a choking hazard. Keep this product and its accessories out of reach from children. Keep all electrical wires secured as exposed wires could lead to serious injury or product damage. Also inspect the condition of the wires regularly for any damage. Never interfere with the parts or attempt to disassemble the internal parts of the battery when the battery is connected or switched on. This could result in serious injury or damage to the product. All components and accessories may only be replaced with identical components directly supplied by CYCMotor Ltd or an official product dealer. CYCMotor Ltd cannot be held liable for any damages as a result of using unapproved parts.

Before the Ride

Ensure that the battery mount is fastened securely to the frame and that the battery is secured to the mount. Incorrect mounting could cause the system to move its position and result in injury while riding. Inspect the mounting position regularly. Ensure that all wiring is dry before connecting it to the motor system. When connecting the battery, make sure that it is properly connected. Faulty connection could result in a short circuit and damage the motor system and/ or battery. Secure all wires properly. Make sure that no loose wires are dangling from the bike that could be jammed into any moving parts. Inspect electrical wires and plugs regularly for any damage.

Installation & Use

Follow the installation guidelines provided in this manual to fit your battery pack securely to your bicycle frame. This product is manufactured to be used as an electric bicycle battery pack for powering the CYCMotor Ltd mid-drive motor product line. Using this battery for anything other than its intended use, is not recommended and will not be supported CYCMotor Ltd.
The installation guidelines also provide you with clear instructions on usage and charging. Kindly be mindful when using and charging this product.
The B-Series ebike battery packs are intended to be mounted on a standard bicycle frame using the steel battery mount and the 3x straps provided. This user manual includes instructions for two common and recommended mounting positions for your reference. Kindly note that mounting positions where all 3x straps are not used, is up to the user’s own discretion and risk.
The battery unit will be activated and deactivated by switching on your kit’s display once all the components are installed and connected accordingly. Do not attempt to alter this method. Do not install anything other than the parts and accessories that came with the battery unit. Doing so could damage the product. Be sure to familiarize yourself with the product warnings provided in this user manual.

Disclaimer

If you require any more information or have any questions about the user manual disclaimer or the content provided, please feel free to contact us via email at [email protected] or call +852 3690 8938. All the information contained in this user manual is published in good faith and for general informational purposes only. CYCMotor Ltd does not make any warranties about the completeness of this information and encourages further inquiries as stated above if needed. CYCMotor Ltd will not be held liable for any losses and/or damages in connection with the use of this product. The use of this product is at the user’s own risk and disgretion. Keep this manual, along with other documents that were included with your battery, for future reference. All content in this manual is subject to change without notice. Please be sure to visit cycmotor.com to view and download the latest version. Note that this manual is not intended as a detailed user, service, repair or maintenance manual. Your insurance policies may not provide coverage for accidents involving the use of this product.
Notice: Please contact CYCMotor Ltd if you are unsure about the assembly instructions or for any further assistance as CYCMotor Ltd will not be held liable for any losses and/ or damages caused by the assembly.

General Specifications

| B- 36| B- 52| B- 52| B- 52L| B- 52L
---|---|---|---|---|---
Rated Battery Voltage| 36V (2p10s)| 52V (2p14s)| 52V (2p14s)| 52V (3p14s)| 52V (3p14s)
Cell| Original Samsung 50e 21700| Original Samsung 50e 21700| Original Samsung 40T 21700| Original Samsung 50e 21700| Original Samsung 40T 21700
Battery Capacity| 10Ah (360Wh)| 10Ah (520Wh)| 8Ah (416Wh)| 15Ah (780Wh)| 12Ah (624Wh)
Maximum Continuous Discharge Current| 30A| 30A| 70A| 45A| 70A
Maximum Charge Current| 3A| 4A| 4A| 4A| 4A
Weight of battery pack| 2.2 kg| 2.9 kg| 2.9 kg| 4.3 kg| 4.3 kg
Weight of battery mount| 0.1 kg| 0.2 kg| 0.2 kg| 0.3 kg| 0.3 kg

SPECIFICATION

Features

• High discharge BMS with short circuit protection

• Secure & versatile dual-mounting solution

• Original high quality Samsung 21700 cells

• Stealthy & compact bag-like design

• Ice-blue battery level indicators

• Quick removal for portability

• Weather & impact resistant

• Bolts
  B-36: M510 x 4, spacer x 4, spring washer x 4 B-52: M510 x 4, spacer x 4, spring washer x 4 B-52L: M5*10 x 6, spacer x 6, spring washer x 6

• Zip ties

• B-36: 4 pcs

• B-52: 6 pcs

• B-52L: 8 pcs

• Brochure

Package Inclusions

• High-impact polycarbonate battery case
• (with Samsung 40T/ 50E cell module, Battery Management System (BMS), & line out with spark proof XT90-S connection encased in ABS+PC)
• Battery mount with padding pre-assembled to battery case with M5 bolts Lithium ebike battery charger Velcro mounting strap x 4pcs
• (B-36, B-52, & B-52L includes 2x 20250mm mounting straps & 2x 25350mm mounting straps)

Dimensions

INSTALLATION

• Required Tools3mm Allen Key / Hex Key
• Operating Notice
  RIGHT-HAND and LEFT-HAND sides are determined by the bike handle; Right-hand corresponds to the right handle & vice versa

Method #1: Strapping on battery pack

• Step 1
  Thread 2x 25350mm straps through the mounting bracket & 1x 20250mm through the side bracket. Note that the above image is for reference only. Straps can be placed as needed.

• Step 2
  Wrap the straps around the frame and secure them tightly for stability. Zip ties can be added for extra security.

• Step 3
  Plug in the conncector by the XT90-S port to the motor system’s battery port

Method #2: Bolting battery pack on frame

• Step 1
  Unscrew the 4x M5 mounting bracket bolts with a 3mm Allen Key.

• Step 2
  Secure the battery mount into position by fastening bottle cage mount insert screws.

• Step 3
  -Select a mounting position on your bike frame that ts over the bottle cage mount inserts.

• Step 4
  – Secure the battery pack with the bolts in Step 2. Make sure to include a spacer and a spring washer in between each bolt and metal hook for best securing. Add straps if needed.

Bolt on through water bottle mounting:

Battery Connector: XT-90 (female) Wire: 10 AWG (red wire to positive pole & black wire to negative pole)

CHARGE INFORMATION

• Charging instructions
  B-36
  Charger Type: 36V 4A XT90
  Charge Time: 3.5 hours until fully charged
  Charge Cycles: 600

• Plug the charger into the wall socket. Connect the battery to the charger at the XT90 connector side. Leave until fully charged (approx. 2 – 4 hours from empty). Unplug after fully charged for safety precautions.
  Warnings

• Refrain from charging the battery pack outdoors Unplug the battery pack after it is fully charged; do not leave it connected to the charger for a long period of time. Do not interfere with the wires or connectors while charging. The battery can stay mounted on the bike or be taken o for charging. Charge the battery pack fully every 2 months if not used regularly.
  B-52L

• Charger Type: 58.8V 4A XT90

• Charge Time: 3 – 4 hours until fully charged

• Charge Cycles: 600

MAINTENANCE

General Maintenance

Please place the battery pack in a cool and dry environment if you do not use it for a long time; charge for 2 hours every month when stored. Use the designated lithium battery charger when charging. Keep away from children. General Maintenance Do not reverse or short the positive and negative terminals of the battery pack. Do not place the battery pack in high temperatures, such as near re. Do not place the battery pack in water, acid, alkaline or salty liquids, avoid submersion. Do not open the battery without special instruction. Do not invert the battery module inside the pack.

TERMS & CONDITIONS 

Warranty Contact Information
CYCMotor Ltd offers a one-year warranty for the battery pack and charger. Man- made failure and other parts are excluded from our warranty. Any attempts to modify this product will void the warranty. For any replacement parts, please visit the CYCMotor Ltd online store at www.cycmotor.com/shop or contact an oficial product dealer. For customer support, including [email protected] email to: phone to: [email protected] +852 3690 8938 shipping; quotes, and office Hours Monday to Friday 9am – 6pm Hong Kong Time

Read More About This Manual & Download PDF:

References

• Downloads | cycmotor
• Downloads | cycmotor
• Refund and Return Policy | CYCMOTOR LTD
• Shop Ebike & Emtb Conversion Kits | CYCMOTOR LTD

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>