CYC Motor BBS02_750w Mid Drive Fitment Installation Guide

BBS02_750w Mid Drive Fitment

“`html

Product Information

Specifications:

• Paper Size: 8.5 x 11 or Letter
• Scale: 100% or Original/Actual Size
• Orientation: Landscape

Product Usage Instructions

1. Bottom Bracket Diameter Measurement:

To check if your bike has a standard ~35 mm diameter bottom
bracket, follow these steps:

1. Cut along the red dotted line on the provided template.
2. Hold up the cutout against your bike’s bottom bracket to
   compare sizes.

2. Bottom Bracket Shell Thickness Measurement:

To measure the thickness of your bike’s bottom bracket
shell:

1. Use the same cutout from Step 1.

2. Align the green and red gauge with the diameter of your bike’s
   bottom bracket.

3. Confirm that the thickness falls within the green area of the
   gauge.

3. Bottom Bracket Size/Width Measurement:

For measuring the width of your bike’s bottom bracket:

1. Cut out the bottom bracket measuring tool along the red dotted
   lines.

2. Flip your bike over to access the bottom bracket area.

3. Align the black line on the tool with the edge of your bike’s
   bottom bracket.

4. Exclude any parts of the bottom bracket assembly and measure
   only the frame width at the bottom bracket.

5. Use the measuring tool to accurately determine the width of
   your bike’s bottom bracket.

Frequently Asked Questions (FAQ)

Q: Can I reuse the measuring tools for multiple bikes?

A: It is recommended to use a fresh set of measuring tools for
each bike to ensure accurate measurements.

Q: What if my bike’s bottom bracket measurements fall outside

the provided ranges?

A: If your bike’s measurements do not align with the provided
guidelines, consider seeking professional assistance for further
evaluation and adjustments.

“`

BOTTOM BRACKET MEASUREMENT GUIDE

Paper: 8.5 x 11 or Letter Scale: 100% or Original/Actual Size Orientation: Landscape
Cut along the red dotted line
1. Bottom Bracket Diameter To check if your bike has a standard ~35 mm diameter bottom bracket, simply cut along the red dotted lines and hold up the cutout against your bike’s bottom bracket.

2. Bottom Bracket Shell Thickness
Using the same cutout from Step 1, use the green and red gauge to confirm that your bike’s frame has a bottom bracket that is 12 mm or less in thickness. When you hold up the circle in line with the diameter of your bike’s bottom bracket, confirm the thickness of your bottom bracket falls within the green area of the gauge.
3. Bottom Bracket Size/ Width
Cut out the bottom bracket measuring tool along the red dotted lines. Flip your bike over to easily access the bottom bracket area for measurement. Align the black line on the tool with the edge of your bike’s bottom bracket. Remember to exclude any parts of the bottom bracket assembly. Measure only the width of your bike’s actual frame at the bottom bracket using the measuring tool. Use the measuring tool to determine the width of your bike’s bottom bracket accurately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>