Blaupunkt BP 10.1A/AG FHD 2-Channel Digital Video Recorder Installation Guide

DIGITAL VIDEO RECORDER
BP 101 A FHD 2-CHANNEL
BP 10.1 AG FHD 2-CHANNEL
Enjoy it.

Operating and Installation Instructions

CAUTIONS

• Please insert the micro SD card in the right direction to avoid damage to the card or the device. If the device shows an error message, please format the micro SD card from the device menu. Please reset the device or change the micro SD card if a similar error continues. Note: All files will be deleted when formatting the micro SD cards. Please backup the important files before formatting takes place. When the reset function is selected, the settings will return to the default setting.
• Blaupunkt does not warrant the performance of the device if with the use of other Micro SD cards other than Blaupunkt Micro SD cards.
• New Micro SD card must be formatted for first use.
• Ensure the bracket is installed correctly & firmly on the windscreen to avoid damage to the device and for a better recording angle.
• Please do not use the product in a wet environment as the device is not waterproofed/water-resistant.
• Please do not record or take pictures facing sunlight.
• To obtain a clear image, please clean the windscreen and device lens regularly. Avoid using devices in dusty environments.
• Handle the device with care and avoid a direct impact on the device. Avoid using devices in high electromagnetic environments.
• The operating temperature of the device is -10°C — 60°C, and the storage temperature is -30°C — 80°C. Continuous exposure to sunlight, especially when locked in the cabin where the temperature exceeds 80°C may result to devise malfunction, color change, housing, and image distortion.

Disclaimer

• Blaupunkt is not liable for any loss or damage caused or resulting from unauthorized disassembly or modification to the product.
• In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, improper storage, whatsoever arising out of or connected with the use or misuse of our products.
• USA & CANADA: Products not intended for sales in the United States and Canada. If purchased in the U.S or Canada, this product is purchased as-is. No warranty, expressed or implied is provided in the U.S. and Canada.
• This device is NOT intended to be used for illegal purposes, or surveillance and shall not be used in any form as evidence for claim purposes.
• Some countries prohibit drivers from mounting anything on the windshield or restrict mounting to specific areas of the windshield. It is the owner’s responsibility to mount the device in compliance with local laws.
• The error may occur depending on the surrounding environment and the voltage of the car.
• Blaupunkt is not liable/ responsible for the non-recorded event, missing files, etc.
• If the power discharge protection is set to ION; motion detection will work as park recording mode. If the car battery voltage is lesser than the setting value of the cut-off voltage, the device will stop recording even at park recording mode.

STRUCTURE

1. Bracket slot
2. Operation indicator light
3. Lens
4. Wireless connection indicator light| 5. GPS connection indicator light
6. Recording indicator light
7. Power cable input
8. Mute/unmute (Press once), SD format (Press & hold)| 9. MicroSD card slot
10. Rear DVR cable input
11. GPS cable input
12. Rear cable
13. Rear lens
---|---|---

Features

• Compact & screenless driving video recorder
• Resolution: Front & Rear 2MP FHD 1920×1080 30fps
• Wide viewing angle (Diagonal): Front — 145°, Rear — 140°
• Preview, download, playback Videos & Setting Configuration via Smartphone Wireless Control App
• Instant file sharing to social networks (Selected Apps only)
• Format-free technology
• Low car battery voltage cut-off
• Automatic park recording with smart motion (24-hour park monitoring)
• G-sensor, loop recording
• Record when Wi-Fi is connected: No
• Built-in microphone & speaker
• Language: English
• Storage: Support up to 128GB Class 10 MicroSD
• Power supply: DC 12V — 24V
• Temperature:10° — +60° (Operating), -30° — +80° (Storage)
• Weight: Front 64g, Rear 120g (with cable)
• Includes: 32GB Micro SD Card & Reader, Cable Holder, 3M Bracket, Hardwire Cable, Manual (Global Positioning Tracker Module for BP10.1AG model Only)

FUNCTION

System Setup System setup is accessible only via a smartphone application.

Wi-Fi

Change Password| Default: 12345678
DVR
Video Quality| FHD+FHD
FHD+FHD
Bitrate| Maximum
High
Average
Impact Sensitivity| 1~10
Volume| 1~5
Voice Record| ON/OFF
White Balance| Auto
Daylight/Sunny
Cloudy
Domestic Lighting
Fluorescent
Contrast| 0 ~ 6
Exposure| -3 ~ +3
Date Time| DD/MM/YYYY, HH: MM
Impact Alert| ON/OFF
Cut-off Voltage| 11.5V(23.5V)
11.7V(23.7V)
11.9V(24.1 V)
12.1V(24.1V)
12.3V(24.3V)
Park Mode Impact Sensitivity| 1~10
Park Mode Recording Time| 6hr/12hr/ 24hr/ 36hr/ 48hr/ OFF
GMT| -11 ~ +12
Voice Guide| ON/OFF
LED| ON/OFF
Format SD Card| Delete all memory data
Adjust Memory Ratio| A-Type
B-Type
C-Type
Reset| Reset the device to the default setting

Mobile Application
Search “Blaupunkt DVR BP1 0” on Google Play and App Store to download. Mobile App device OS version requirement: Android 4.4 (KitKat) or higher, iOS 10.0.2 or higher.

Pair DVR and Smartphone
The range of distance between the DVR (with Wireless Control dongle) and smartphone is approximately 10 meters (33ft) in an open field environment.
a. Go to smartphone setting to search for available Wi-Fi
b. Select BP10.1A Wi-Fi “BP10.1………” to connect c. Enter default password 12345678 for first-time connection After successful pairing, enter into a mobile app to start.

1. Fullscreen
2. Mute/unmute
3. Switch between front & rear DVR
4. Live view 5. Download File
5. Car DVR (Video File)
6. Settings
7. Reflect (Rear DVR only)
8. Snapshot (Photo)

Instant File Sharing to Social Network

1. Go to CAR DVR
2. Click to download the file
3. Press & hold the downloaded file for sharing option
4. Select the preferred sharing option (Applicable for selected social networks only)

|
---|---

Setting

1. Go to Setting to change the setup
2. Change Password (Default Password: 12345678)
3. Video Resolution
4. Impact Sensitivity (G-sensor)
5. Volume
6. Voice Record
7. White Balance
8. Contrast
9. Exposure
10. Date/Time| 11. Impact Alert
12. Cut-off Voltage (Low car battery cut-off setting)
13. Park Mode Impact Sensitivity (G-sensor)
14. Park Mode Recording Time (Set power supply duration)
15. GMT (Standard time setting)
16. Voice Guide
17. Format SD Card (Delete all memory data)
18. Adjust Memory Ratio (All data will be deleted when the ratio setting is adjusted, backup data before changing the setting)
19. Reset (Reset setting to default setting)
---|---

Blaupunkt DVR BP 10 PC Viewer – Visit www.blaupunkt.com/ase to download PC Viewer

Note: Older files will be overwritten when the memory card is full and requires new storage space. Files will be overwritten according to file arrangement DRIVE/EVENT/PARK/PHOTO. Backup recordings regularly to prevent important files from being overwritten.

A) Extract Video from Micro SD

PC Viewer

1. Go to www.blaupunkt.com/ase to download the PC viewer
2. Remove microSD card from DVR
3. Insert the microSD card into the PC (a card reader may be required)
4. Open downloaded PC Viewer
5. Select “File Search”, then select “FA” drive 6. Select videos by marking the check box on the right next to the scroll bar
6. Select”Extract File”, then preferred saving folders to download the recordings.
7. Refer to the preferred folders to playback the downloaded recordings.

App

1. Go to App Store/ Play Store and search “Blaupunkt DVR BP10” to download the Wireless Control App
2. Ensure the microSD card remains inside the DVR and that DVR is turned on
3. Enter the downloaded APP to begin connecting to the DVR WiFi
4. Select the “BP10.1…” to connect
5. Enter the default password “12345678” for a first-time connection
6. Return to the APP, and select “DVR FILE” to search for the preferred file to download
7. Select the “Download” icon on the right, then select the preferred camera recording to download the files.
8. Select”DOWN FILE” to playback the downloaded recordings.

Scan to watchhttps://www.facebook.com/watch/?v=391086548197859

B) Retrieve Password

1. Installing the PC Viewer on PC
2. Remove MicroSD card from DVR
3. Insert MicroSD card to PC
4. Search file name”menu.cfg”
5. Open the file for DVR software version: BP10.1A.FH V2.3.5 (8 alphanumerics)

menu.cfg

1. BP10.1A.FH.fexBP10.1A FH V2.3.512345678…K

Scan to watchhttps://www.facebook.com/watch/?v=2236539040009801

SAFETY

• Assign a mounting location that will not obstruct the driver in any circumstances or cause injuries to drivers and passengers in case of an emergency brake or accident.
• Ensure all wires are connected properly, and that the device is functioning well before installation.
• Any unauthorized installation and modification may cause malfunction to the device and void the warranty of the product. Always use the parts that are included with the device only.
• Please contact the Blaupunkt dealer or vehicle’s manufacturer if the information provided here does not fit your specific requirement.

Power Cable Hardwiring

• Use the hardwire power cable.
• BATT (+): Connect the wire cable to the permanent power fuse box. (Ex.: Hazard light, dome light, tail light, etc)
• ACC (+): Connect the wire cable to the fuse that receives power through ignition. (Ex.: Cig lighter, audio system)
• GND: Connect the cable to the vehicle chassis or vehicle bolts.

ACCESSORIES

*Subject to changehttps://taplink.cc/blaupunkt.apac
Design and engineered by Blaupunkt Competence Centre
2 301 18 011 22 03

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>