ZUMTOBEL R150 LED Downlight Instruction Manual

June 16, 2024
ZUMTOBEL

ZUMTOBEL R150 LED Downlight Instruction

Product Information

Specifications

  • Manufacturer: Zumtobel LIGHTING GmbH
  • Model: P-INF R150/200 LDO TL
  • Address: Schweizerstrasse 30, 6850 Dornbirn, AUSTRIA
  • Website: www.Zumtobel.com
  • IP Rating: IP20, IP44
  • Voltage: 220-240V
  • Frequency: 0/50/60Hz

Product Usage Instructions

Mounting Instructions

To mount the product, please follow the steps below:

  1. Ensure that the power supply is turned off before starting the installation.
  2. Select a suitable location for mounting the product.
  3. Use appropriate tools to securely fix the product to the desired surface.
  4. Make sure that the product is mounted according to the specified dimensions and orientation.
  5. If necessary, connect the product to a power source using the provided wiring.
  6. After installation, test the product to ensure it is functioning correctly.

Frequently Asked Questions (FAQ)

  • Q: Can this product be used outdoors?
    A: Yes, this product has an IP44 rating, which means it is suitable for outdoor use.

  • Q: What is the maximum voltage this product can handle?
    A: This product can handle a voltage range of 220-240V.

  • Q: Can I replace the light source in this luminaire myself?
    A: No, the light source should only be replaced by the manufacturer or a qualified person.

  • Q: Is there an option for emergency lighting?
    A: Yes, there is an option for emergency lighting according to

60598-2-22. Please refer to the user manual for more information.

Mounting instructions

Important notices. Please, read it first!

 Installation Instructions

  1. The installation and commissioning of the luminaire as well as any modification to the luminaire may only be performed by authorized personnel (qualified electrician).
    The manufacturer is not liable for damages resulting from improper or faulty installation or operation or from unauthorized modifications to the luminaire.
    The luminaire is used exclusively for lighting and is to be installed by the national installation regulations.

  2. Use of the supplied control gear only in conjunction with the associated luminaire
    Caution, risk of electric shock! Disconnect main cables and any existing DALI control lines from mains and check that
    the power is off before conducting any maintenance and assembly work.
    The hot plug-in is not permitted. The hot plug-in may result in damage to the luminaire and entail loss of warranty claims!
    Neutral conductor breaks during operation will result in power surge damage to the lighting system. Therefore neutral disconnect terminals in three-phase AC circuits may only be opened voltage-free and must be closed before the power supply is switched back on.

  3. Luminaire is not suitable for covering with material. thermally insulating

  4. The luminaire is protection type IP44, only when being installed in an enclosed ceiling! Protection type IP44
    does not apply in the ceiling void itself.

  5. With thin or soft ceiling material it is recommended that ceiling reinforcing rings or frames should be used to enlarge the bearing surface. 60800314 (R150), 60800316 (R200)
    Commissioning after the construction phase, if the mains voltage is continuously present!

  6. Dispose of packaging and luminaire following applicable regional regulations.
    Keep the instructions safe!
    Specifications are subject to change without notice! If you have questions, please contact the manufacturer.

DIMENSIONS

INSTRUCTIONS

  • Protected earthing not required

CAUTION


Reflector cleaning

60 800 118

  • Reflector cleaning cloth

Option Emergency Lighting EN 60598-2-22
This luminaire is exclusively intended for systems with a plug-in connection that is protected against unauthorized disconnecting.

  • The servicing of the control gear in this luminaire should only be undertaken by the manufacturer or his service agent or a similar qualified person.
  • The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

Zumtobel
Info on (non-) replaceability

ZUMTOBEL Postfach 760 D-32637 Lemgo Tel. + 49/(0)5261/212-0 Fax +49/(0)5261/212-9000 * Internet: http://www.Zumtobel.com
Mat.-Nr: 06 979 978/4/02 03.23

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ZUMTOBEL User Manuals

Related Manuals