SUPERATV ACCP-U-001-00-EPR Rigid Molle-Holster Panel Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
INSTALLATION INSTRUCTIONS
Rigid Molle / Holster Panel: Universal Fit
ACCP-U-001-00-EPR Rigid Molle-Holster Panel
- Panel installation location and depth are up to the end user.
- Depending on location, both lengths of Screws and Spacers may be required.
- See the following page for Panel installation using Long Screws and Long Spacers.
6 each
| Long Screw
---|---
| Short Screw
| Short Spacer
| Long Spacer
Check behind the mounting surface for any interference before installing screws
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
the user has aftermarket products on the machine, contact SuperATV® to verify
that they will work together. Although SuperATV® has thousands of satisfied
customers, the user should be aware that installing lift kits, long travel,
suspension kits, tires, etc. will change the ride of the machine and may
increase maintenance and part wear. Operating any off-road machine while, or
after, consuming alcohol and/or drugs increases the risk of bodily harm or
death. No warranty or representation is made as to this product’s ability to
protect users from severe injury or death. SuperATV® urges operators and
occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should
damage occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of the seller to the user for all damages,
losses, and causes of action, if any, shall not exceed the total purchase
price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warranted if the item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on the town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation of
the law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use
of the product. You must abide by all local, state, and federal laws,
including but not limited to vehicle safety, traffic laws, and ordinances. It
is your responsibility to know the laws and how they apply to you.
The Buyer is responsible for fully understanding the capability and
limitations of his/her vehicle according to manufacturer specifications,
warnings and instructions and agrees to hold SuperATV® harmless from any
damage resulting from failure to adhere to such specifications, warnings, and/
or instructions. The Buyer is also responsible to obey all applicable federal,
state, and local laws and ordinances when operating his/her vehicle while
using this product, and the Buyer agrees to hold SuperATV® harmless from any
violation thereof.
Need help with your installation?
**| sales@superatv.com| |
www.superatv.com
---|---|---|---
**| 1-855-743-3427| | 8:00am –
8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Read instructions and view illustrations before beginning.
Thank You
For Choosing
SUPERATV.COM
IN-ACCP-U-001
9/8/2021
© 2021 SuperATV.com®
All Rights Reserved.