KLARSTEIN 10035830 Polar Tower Smart Air Cooler Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
POLAR TOWER SMART
Air Cooler
10035830 10035831
www.klarstein.com
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages.
We assume no liability for damage caused by disregard of the instructions and
improper use.
Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10035830, 10035831 |
---|---|
Power supply | 220-240 V~ AC 50 Hz |
Power output | 85 W |
Speed levels | 4 |
Timer | 24 hours |
Remote control | Battery type: 3 V CR2025 |
WiFi standard | 802.11 b/g/n |
WiFi frequency | 2,4 GHz |
WiFi radio-frequency power (max.) | 20 dBm |
SAFETY INSTRUCTIONS
- The appliance is only for household and indoor use.
- Check the voltage indicated on the rating plate.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Unplug the power plug before cleaning or repairing the product.
- Do not touch the power cord with wet hands to avoid the risk of electric shock.
- Do not pull the cord when unplug the power plug.
- Do not bend the power cord or place heavy objects on it.
- Never insert wood sticks, metal sticks and other objects into the air inlet and outlet, it may lead to current leakage, short circuit and product damage.
- Do not spray insecticides or flammable sprays around the product, it may cause damage to the product.
- Avoid direct blowing to children for long time, it may lead to child sickness or affect the health.
- Make sure that no foreign matter is adhered to the power plug and insert the plug completely.
- Exception handling: If there is any peculiar smell or abnormal sound when using the product, stop it immediately and disconnect the power.
- Do not tilt or impact the device when placing or moving it after filling water, in order to prevent water spilling. If the roduct has ever inclined and there is water inside, immediately pull out the plug, and dry 24 hours before starting again.
- The water level of the tank must not exceed the maximum level. When the cooling or humidification function is turned on, the water level shouldn’t be lower than the minimum level.
- When the tank is filled with water, do not lift the product by holding the handle, or else the water in the tank will overflow. Please push the handle. If there is no water or little water in the tank, you can hold the handle to lift the device.
- During humidification, do not remove the air filter and wet curtain bracket. It may cause water droplets ejection from air outlet.
- Do not turn the blades with hands, or else it will damage the synchronous motor.
- If you go out or the device will not be used for a long time, turn it off and unplug the power cord from the outlet.
- In case of fault, please deliver it to the maintenance station or notify after-sales service centre. Don’t dismantle or replace parts arbitrarily, as it may cause safety problems.
- Do not ingest battery, Chemical Burn Hazard.
- This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- The batteries contain materials, which are hazardous to the environment. they must be removed from the appliance before it is scrapped and that they are disposed of safely.
- Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
- Never leave water in the reservoir when the appliance is not in use.
- Empty and clean the humidifier before storage. Clean the humidifier before next use.
PRODUCT OVERVIEW
INSTALLATION INSTRUCTIONS
- Open the packing box and take out the cooling fan and place it on the desktop.
- Take out the 4 casters, and install them according to the caster assembly drawing.
- After the caster shaft is aligned with the caster hole, the caster cannot be pulled out to complete the assembly.
OPERATION INSTRUCTIONS
-
When using the appliance, make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline. Plug the power cable into 220V-240V~ electrical outlet. If you need cooler more, add ice block into upper or bottom water slot, see following images.
You can also freeze the ice boxes (one fat ice box for top water tank, four slim ice boxes for bottom water tank) in freezer for 1-2 hours, and then put them into the water tank, or add ice blocks directly into the water tank to get cooler air. -
ON/OFF: Turn the FAN on by pressing the ‘ON/OFF’ button, turn the FAN off by pressing the ‘ON/OFF’ button again.
-
When switched on, the unit will first operate in second wind speed, normal mode.
-
SPEED: You can adjust the fan speed to the desired level, by pressing ’SPEED’ button, total 4 speeds.
-
MODE: Pressing the MODE button will set the FAN into NORMAL, NATURAL or SLEEP mode. The corresponding icon will be lighted up on the display.
-
TIMER: Press this button to set the running time of the fan, the corresponding icon will be lighted up on display. The fan can be adjusted from 1 hour to 24 hours. Pressing the button once will set the timer at 1 hour, press the button twice and the timer will set at 2 hours and so on until a maximum of 24 hours can be set.
-
SWING: Press this button once to start the swing function, the corresponding icon will be lighted up on display. Press a second time to stop the swing function.
-
COOL: Touch “COOL”, cool function start work and the corresponding icon will be lighted up.
a. Before operating the unit in Cool mode, make sure the water pump in the water tank is properly fixed, then add clean water into the water tank. While adding the water, make sure that you keep an eye on the water level indicator to make sure that you do not over or under fill the unit. Press the button Cool after you have added the water and the unit should commence to blow cooler air. The cool icon will light on at the same time. When you press the button Cool again, it will stop working, the cool light will also go out.
b. If you find that the air after Step 1 is still not cool enough, you can add additional ice blocks into the water tank directly. Be sure not to exceed the water tank capacity otherwise damage to the unit or electric shock may occur.
c. If you wish to use an Ice box instead of ice block, just place it directly into the water tank. It will be good cooling efficiency if you place it in freezer and let the ice boxes freeze for 1 to 2 hours.
d. You may completely pull out water tank, then replace water in the water tank or clean water tank.
e. Under the cooling work condition or you ever used cooling function, the appliance will keep on blowing 3 minutes if you shut off the unit or timing finished. -
Ionizer: When the Ionizer button is pressed, the Ionizer function is enabled to work and purify the passing air.
-
How to knock down the honeycomb filter: Pull out the rear bracket from the top of the bracket, and then take up the honeycomb filter.
DEVICE CONTROL BY SMARTPHONE
If you integrate the device into your home WiFi, you can conveniently operate
it via the associated Klarstein app. The app not only allows you to remotely
control the device via your smartphone, but also gives you access to recipes
and additional information.
Follow these steps to connect your smartphone to your Klarstein device:
- Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
- Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
- Open the Klarstein app.
- Sign in to your account. If you do not have an account, sign up in the Klarstein app.
- Follow the instructions from the app.
App Download
Use the scan function of your smartphone to scan the QR code and save the app
on your smartphone.
Note: The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.
iOS | Android |
---|---|
https://apps.apple.com/app/id1479571307#?platform=iphone |
https://play.google.com/store/apps/detailsid
=com.chaltec.klarsteinrn&hl=en
Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:
- Is the device plugged in?
- Is the WiFi feature of my phone enabled?
- Is the WiFi function of the Klarstein device activated? (Follow the instructions in the app)
- Has the WLAN password been entered correctly?
- Are the router, Klarstein device and smartphone in the immediate vicinity during the connection attempt? (Ideally no more than 5 m apart)
- If you have deactivated the 2.4 GHz band in the settings of your wireless router, activate it in your router settings.
Note: For further help, follow the instructions in the app when setting up the connection.
MAINTENANCE
Remote control
- Battery type CR2025 (supplied).
- Please remove the battery if the remote is not in use for long period.
- Store the remote control in a safe place when not in use.
Cleaning and storage
- Unplug the fan before cleaning.
- Use only a soft cloth to gently wipe the fan clean.
- DO NOT immerse the fan in water and never allow water to drip into the motor housing.
- For storage, clean the fan carefully as instructed and store your fan in a cool dry place.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic
devices in your country, this symbol on the product or on the packaging
indicates that this product must not be disposed of with household waste.
Instead, it must be taken to a collection point for the recycling of
electrical and electronic equipment. By disposing of it in accordance with the
rules, you are protecting the environment and the health of your fellow human
beings from negative consequences. For information about the recycling and
disposal of this product, please contact your local authority or your
household waste disposal service.
This product contains batteries. If there is a legal regulation for the
disposal of batteries in your country, the batteries must not be disposed of
with household waste. Find out about local regulations for disposing of
batteries. By disposing of them in accordance with the rules, you are
protecting the environment and the health of your fellow human beings from
negative consequences.
DECLARATION OF CONFORMITY
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type Polar Tower Smart
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: use.berlin/10035830
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Polar Tower Smart is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use. berlin/10035830
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>