KLARSTEIN 10030977 Stand Fan Instruction Manual

KLARSTEIN 10030977 Stand Fan

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Remove the packaging and make sure that the appliance is intact. If in doubt, do not use it and contact qualified personnel only.

• Packaging materials (plastic bags, polystyrene, staples etc.) Must be kept out of the reach of children as they could be hazardous.

• This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience
  and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

• Before connecting the appliance, check that the appliance rating corresponds to the mains rating.

• This appliance must only be used for the purpose for which it has been manufactured. As a stand fan. The manufacturer is not responsible for any damage caused by improper or incorrect use.

• The installation/assembly of the device will be made according to the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible

•  Before cleaning or carrying out maintenance on the appliance, disconnect it from the electrical mains by removing the plug from the electrical outlet or by switching off the system switch.

• If the appliance is faulty and/or operating incorrectly, switch it off without tampering with it. If the above is disregarded, the safety of the appliance may be compromised.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Do not power the device using multiple sockets.

• Do not use adapters and/or extension cable

• The device must not be switched on using external timers and/or other remote control devices which are not specified in this manual.

• Do not use or store the device near heat sources (heaters, stoves).

• Do not dip the device in water or other liquids; in case the accidental fall in the water do not try to take it out, but first of all unplug immediately the power cable from the socket.

• If you use the device for the first time, make sure to remove any label or protective sheet which blocks its proper functioning.

• Plug and unplug the power cable with dry hands and hold it firmly.

• Before plugging the plug into a wall outlet, make sure that the unit is switched off.

• Always unplug the power cable to avoid the overheating and avoid stretching it.

• Make sure that all air intakes and outlets are free and not covered so that the unit does not overheat.

• Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily.

• Do not hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.

• Place the device at a proper distance from the objects or surrounding walls making sure that its functioning will not cause accidental damage.

• Do not use the device near gas stoves or open flames in general.

• Do not use the device near curtains or textiles.

• Do not cover the device during functioning.

• Do not expose yourself for a long period to the air flow generated by the device because it can cause damage to the health

• If the fan must be stored for a long period and is not used regularly, place the fan in its original packaging in a dry place.

• Always remember to unplug the power cable of the device if it is not used for a long period, before storing, cleaning or performing any maintenance operation.

• Do not use the appliance in the presence of potentially flammable or explosive liquids or gases.

• This product is intended for household use only and not for commercial/industrial or outdoor use.

CLEANING AND CARE

Note: The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

• Before cleaning and assembling, fan must be unplugged.
• To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
• Please wipe the exterior parts with a soft cloth soaking a mild detergent. Do not use any abrasive detergent or solvents to avoid scratching the surface.
• Do not use any of the following as a cleaner: gasoline, thinner.
• Do not allow water or any other liquid into the motor housing or interior parts.

OVERVIEW AND ASSEMBLY

OPERATION

Remote control and function keys

Display and symbols

Switch on the device
Insert the plug into the socket. A beep sounds and the unit is in standby mode.

Key functions

| Power button
---|---
In standby mode, press this button to start the fan at the last set speed. Press the button while the fan is running to stop the unit and return to standby mode.
| Knob
Turning the knob clockwise increases the speed from [Normal Wind 01] upwards. Turning the knob counterclockwise decreases the speed from [Normal Wind 26] downwards.
| Mode Button
Press the button repeatedly to enter each mode in the following order: Normal

Wind > Natural Wind > Night Mode > Comfort > Quiet > Normal Wind.

Normal Wind: The wind speed is constant. When the normal wind icon is lit, wind speed 1-26 can be set.
Natural Wind: The fan simulates natural wind, the wind speed is pre- programmed and changes. The airflow feels as if you are out in nature.
Night mode: The fan runs at low wind speed until the timer has expired. After that, the unit switches off automatically so that you can sleep in peace.
Comfort: The wind is automatically adjusted according to the room temperature. If the temperature falls below 20°C, the fan stops. As soon as the temperature rises above 20°C again, it starts again. If you select this function, the corresponding icon lights up and the display shows “00”.
Quietly: If you select this function, the motor runs particularly quietly and the COMFORT symbol lights up. Press the button again to return to normal low wind speed mode.
| OSC (Swinging)
---|---
After the fan has started, press this button repeatedly to start and stop

swinging.

| PRO (Timer)
When the fan is running, press the Timer button to set an off timer. The timer icon flashes every second in the display.
Turn the rotary knob clockwise to set the hours as follows: 0.5 > 1.0 … > 12.0

0. Turn the knob counterclockwise to set the time as follows: 7.5 > … 0.5 > 00 > 12.0 > …
   If you have set the time, wait 5 seconds until the set time flashes twice in the display and a beep indicates that the time has been accepted. As soon as the set time has been accepted, the fan returns to the normal operating mode

and the timer icon stops flashing. To cancel the timer, press the timer button for 5 seconds. If the setting was successful, the display will show the wind force again.

In standby mode, press the timer button to program an on timer. The timer icon will light and you can enter the time. Turn the Rotary encoder again to set the desired time. When you are finished, the display will show the set time. To cancel the timer, press the Timer button several times.
Note: If you set the time in the On state, you can briefly check the time after setting and change it within 5 seconds. If you do not make a setting for 5 seconds, the set time flashes twice in the display, then the display shows the wind speed again.

Operation via the control panel on the device

On/Off button

Has the same function as the remote control.
Function key Swing
In the On state, briefly press the button to start or stop swinging. Press and hold the

button to program an off timer. Follow the steps above to set the timer.

In standby mode, press and hold the Swing function button to program an on timer.

Follow the steps above to set the timer.

FURTHER SETTINGS

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

MANUFACTURER & IMPORTER (UK)

• Manufacturer:
  Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

• Importer for Great Britain: Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham-by-Sea
  BN43 6RE United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>