Jesebang Wireless Earbud, Bluetooth 5.2 Headphones Touch Control-Complete Features/User Guide

: June 5, 2024
: Jesebang

Table of Contents

Jesebang

Jesebang

Jesebang Wireless Earbud, Bluetooth 5.2 Headphones Touch Control

Jesebang-Wireless-Earbud-Bluetooth-5.2-Headphones-Touch-Control-
imgg

Specifications

BRAND: Jesebang
EAR PLACEMENT: In-Ear
COLOR: White
PRODUCT DIMENSIONS: 1.18 x 0.79 x 0.39 inches
ITEM WEIGHT: 1.66 ounces
BATTERIES: 2 Lithium Polymer batteries

Introduction

Jesebang Bluetooth earbuds include sophisticated Bluetooth 5.2 technology for quick and steady transmission without tangling, allowing you to have an uninterrupted calling and music experience. With 13mm speakers and triple- layer composite diaphragms, these wireless earphones deliver powerful bass, breathtaking treble, and crisp mids. These earbuds are made for music and sound enthusiasts. You may share the IT100 Bluetooth earphones with your friends and family because they enable mono and twin stereo modes. For phone calls, each earbud features a built-in microphone. While on the phone, ENC noise reduction can let others hear your speech quite well. Wireless headphones allow wireless charging, so you may charge them by placing them on a wireless charger (not included). Furthermore, the rechargeable case is fitted with a Type-C connector that takes only 1.5 hours to fully charge. With quick charging technology, you may listen for two hours after only 20 minutes of charging.

After a single charge, the earbud can be used for up to 8 hours. The charging case’s built-in 400mAh lithium battery can charge the Bluetooth earbud more than four times, with a total runtime of up to 40 hours. It’s incredibly portable while heading out for work or travel because a single earphone weighs only 4.1g and the charging case weighs only 47g. Every surface of the earbuds that comes into contact with your ear is constructed of 30° soft rubber. The liquid soft rubber nozzle evenly distributes pressure throughout your ear for comfort, stability, and noise reduction. Giving you a comfortable fit for all- day wear and minimize tiredness. Ordinary splashing water and rain are not a problem with IP7 waterproofing. Don’t be concerned about becoming wet or sweaty while participating in sports or outdoor activities.

PACKAGING LIST

PRODUCT OVERVIEW

Charging the case LED
Charging port
Multifunctional button
Earphone LED
Magnetic charging pin
Earphone mic

POWER ON & PAIRING

APPROACH 1- WITH THE CHARGING CASE

Take out earphones from the charging case
Select “IT100” from Bluetooth list

APPROACH 2- WITHOUT CHARGING THE CASE

POWER ON
touch the earphones for 2 seconds Prompt sound “Power On”

PAIRING

Right earphones blue and white light flash
Select “IT100”

NOTE
the wight earphone is the master earphone

INCOMING CALL

ANSWER/END CALL
Tap the left/right earphones once
MUSIC PLAY/PAUSE
Tap the left/right earphones once

POWER OFF

MODE-WITHOUT CHARGING CASE

Turn off Bluetooth to disconnect the earphones
Touch either one earphone for 10 seconds to power off both earphones

SINGLE MODE-WITHOUT CHARGING

Turn off both earphones. Touch the left/right earphone for 4 seconds enter pairing mode.

Select ‘IT100’ from Bluetooth list

GAME MODE

GAME MODE ON: tap left/right earphones 4 times with prompt sound: game mode
GAME MODE OFF: tap left/right earphones 4 times with prompt sound: game off

CHARGING EARPHONES

Open and close the charging case cap, wait for 3 seconds.
The leftmost/rightmost LED light on: left/right earphone is charging.

LED LIGHT OFF
fully charged

CHARGING CASE

Put the earphones back in the case. The lights on charging case stand for the remaining battery capacity

WIRELESS CHARGING SUPPORT

Put the charging case on the wireless charging pad

NOTE
it takes about 2.5 hours to fully charge the charging case

Frequently Asked Questions

How do you pair wireless earbuds manually?
Pull down the shade from the top of the phone and long-press the Bluetooth symbol on an Android device. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. To pair your headphones, tap the name of the headphones you’re trying to pair.
When your true wireless earphones are fully charged, how do you know?
Connect the charging cable (included) to the charging connection on the back of the charging case and the other end of the charging cable to a usable USB power source with the earbuds inside. When the power indication light on each earbud turns off, the earbuds are fully charged.
How do wireless earbuds communicate with one another?
Remove both earphones from the charging case at the same time and wait for them to switch on and connect to each other for a few seconds. If they don’t immediately pair, put them back in the charging case and repeat the process of extracting them at the same time.
Why isn’t my Bluetooth pairing working?
To reset Wi-Fi, mobile, and Bluetooth on an Android phone, navigate to Settings > System > Advanced> Reset Options > Reset Wi-Fi, mobile, and Bluetooth. To unpair all of your devices on iOS and iPadOS, go to Settings > Bluetooth, tap the info icon, then select Forget This Device for each device, then restart your phone or tablet.
What is the best way to see if my earbuds are charging?
If you have AirPods Pro or AirPods (3rd generation), you may check whether your AirPods Pro or AirPods (3rd generation) are charging (amber light) or fully charged by tapping the case while it’s on the charging pad (green light).
What does the blue light on the earbud case indicate?
The blue light on the outside indicates that the battery is charged. According to the user handbook, it can charge your earbuds up to ten times.
What does the blue light on earbuds indicate?
The headphones may be in pairing mode if they have a slow pulsing blue light. Blinking red and blue is the most popular light pattern for pairing mode. However, you should try pairing your headphones with another device to check whether the flashing blue light goes away after the device is linked. Interference is a possibility.
Why aren’t my earbuds communicating with one another?
Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot.
My Bluetooth headphones aren’t connecting to my phone?
If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues.
What is the best way to check the status of my battery?
Navigate to Settings > Battery > Battery Usage to check the battery state of your Android phone.